BearingIndex
THE BEARINGINDEX DIRECTORY

608 — 8 × 22 × 7 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 7 mmD = 22 mmd = 8 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

608

608 is a deep groove ball designation documented on BearingIndex from 10 manufacturer publications. The published boundary dimensions are 8 × 22 × 7 mm. The publishing works are in Zhejiang, Fujian, Shanghai provinces, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
8 mm
Outside D
22 mm
Width B
7 mm

Compare the 10 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Reference mass (kg)Source recorded
Sihai
608
————————2026-09-24 source ↗Request
CZ
608
————————2026-09-24 source ↗Request
SILL
608
————————2026-09-24 source ↗Request
SFH
608
————————2026-09-24 source ↗Request
Runstar
608
————————2026-09-24 source ↗Request
Yuyao Global
608
————————2026-09-24 source ↗Request
RCL
608
3.31.373400040000———0.01292026-09-24 source ↗Request
HOTO
608
3.321.3826000340000.3——0.0112026-09-24 source ↗Request
Hardchn
608
————————2026-09-24 source ↗Request
Yuyao Xinfeng
608
3.291.37——0.373.969—2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 3.29 – 3.32 kN across 3 sources3
Static load ratingRanges 1.37 – 1.38 kN across 3 sources3
Limiting speed — greaseRanges 26000 – 34000 rpm across 2 sources2
Limiting speed — oilRanges 34000 – 40000 rpm across 2 sources2
Minimum corner radiusAll 2 sources publish 0.3 mm2
Reference massRanges 0.011 – 0.0129 kg across 2 sources2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 27 mm
Mean diameter dm(D + d) / 215 mm
C / C₀ load ratio (3 sources)dynamic ÷ static load ratingRCL 2.41 · HOTO 2.41 · Yuyao Xinfeng 2.4

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 608.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 608

Hardchn

Ningbo, Zhejiang, China

Miniature deep groove motor bearings

Hardchn identifies ZXZC bearings and a separate ring-production route. Its 635/608 product tables and C28 non-standard entry provide useful starting evidence, but table anomalies, general material/grease options and inconsistent scale statements need supplier confirmation.

Published ranges: 60-, 62- and 63-series ball bearings · 68- and 69-series ball bearings · Nonstandard deep groove designs

6 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Hardchn about 608

HOTO

Ningbo, Zhejiang, China

Miniature deep groove motor bearings

Small motor and miniature deep-groove bearings; official 60, 62 and 69 tables support a same-bore comparison, with speed-data and qualification limits made explicit.

Published ranges: Miniature deep groove ball bearings · 6000 and 6200-series motor bearings

29 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask HOTO about 608

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 608

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about 608

SFH

Shanghai, China

Miniature and thin-section ball bearings

SFH publishes miniature, flanged, thin-section and nonstandard bearing designs, with Wuxi production and Shanghai technical or inspection functions described on its company page. Specify the complete material, cage, closure and lubricant configuration, and confirm the current production site and certificate scope. Ceramic balls alone do not establish a nonmagnetic bearing.

Published ranges: Metric and inch miniature deep groove bearings · Flanged miniature bearings · Thin-section ball bearings · Double-row angular contact and thrust bearings

51 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SFH about 608

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 608

SILL

Ningbo, Zhejiang, China

Deep groove and tapered roller bearings

Deep-groove procurement from published stock to controlled order, with actual 6000 geometry, five inspection stages, carton examples and dated certificate checks.

Published ranges: 6000, 6200 and 6300 deep groove series · Tapered roller bearings · Nonstandard bearing designs

20 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SILL about 608

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 608

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 608

Applications the publishing works state.

ApplicationStated by
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesRCL, Yuyao Xinfeng
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Electric motorsHardchn
Encoders and motorsRCL
FansHOTO
Fishing tackleRunstar
Garden toolsCZ
Household appliancesSihai, Yuyao Global
Medical equipmentRunstar, Yuyao Global
Office automationHOTO
Office equipmentSihai
Power toolsCZ, Sihai
Precision instrumentsRunstar
Precision machinerySFH
Precision motorsSFH
RoboticsRCL
Small motorsRunstar
Vacuum cleanersHOTO
Water purifiersHOTO

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Other designations with the same 8x22x7 mm envelope.

DesignationBearing familyWorks
608 ZZDeep groove ball1
608ZZ/2RSDeep groove ball1
S608ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
600010 × 26 × 8Deep groove ball12
6000-2RS10 × 26 × 8Deep groove ball1
6000E10 × 26 × 8Deep groove ball1
6000T1X10 × 26 × 8Deep groove ball1
6000TB10 × 26 × 8Deep groove ball1
6000zz—Deep groove ball2
6000ZZ/2RS10 × 26 × 8Deep groove ball1
600112 × 28 × 8Deep groove ball9
6001-2RS12 × 28 × 8Deep groove ball1
6001-2RZ12 × 28 × 8Deep groove ball1
6001E12 × 28 × 8Deep groove ball1
6001G12 × 28 × 8Deep groove ball1
6001T1X12 × 28 × 8Deep groove ball1
6001TB12 × 28 × 8Deep groove ball1
6001ZZ12 × 28 × 8Deep groove ball2
6001ZZ/2RS12 × 28 × 8Deep groove ball1
600215 × 32 × 9Deep groove ball10
6002-2RZ15 × 32 × 9Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 608.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. SILL · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. SFH · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. Runstar · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. Yuyao Global · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  7. RCL · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  8. HOTO · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  9. Hardchn · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  10. Yuyao Xinfeng · 608 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.