RCL
RCL / Ningbo Shilong: thin-section ball bearings for compact assemblies, encoder qualification and a separate flexible-bearing route.
A compact encoder and a flexible reducer need different bearing questions.
Ningbo Shilong identifies RCL as its brand and lists thin-section and deep-groove ball-bearing manufacture. Company identity [1] Its thin-section navigation includes 67, 68, 69, MR and 16 families, while its robot-bearing section includes a harmonic-reducer bearing route. 67-series page [2] Harmonic-reducer page [4] Start by identifying the bearing’s position and job in the mechanism.
The 67-series page makes load capacity a design question.
RCL describes the 67 series as metric bearings for severely limited space, and explicitly says their very thin walls require consideration of load capacity in the application design. [2] This qualification matters more than simply choosing the smallest section that fits.
Send the surrounding assembly
Include shaft and housing sections, locating shoulders, tolerances and the installation method. State load directions and magnitude, speed, temperature and operating cycle. Ask RCL for the offered part’s ratings and allowable installation conditions instead of assuming the family name supplies them.
Make alternatives comparable
For a proposed 67, 68, 69, MR or other design, compare the controlled envelope, load requirements and running acceptance under the same assembly conditions. Ask what changes in the shaft/housing or closure would be required. Do not approve an alternative only because its bore matches.
Test the bearing and the encoder as two connected requirements.
RCL’s 18 September 2025 application article focuses on 6700/6800 thin-section bearings supporting encoder components, discusses running accuracy and friction, and names RS rubber-seal and ZZ metal-shield options. [3] It provides application context, not a measured accuracy result for your encoder.
| Question to resolve | Information to send | Evidence to agree |
|---|---|---|
| Will the installed support run accurately? | Bearing location, fits, code-disc/shaft arrangement, speed and permitted running error. | Drawing characteristics and bearing measuring conditions, followed by the assembled encoder’s signal/accuracy test. |
| Which closure and lubricant fit the duty? | Contamination exposure, starting/running torque target, temperatures and operating cycle. | Exact RS/ZZ or other offered construction, grease and relevant torque/test conditions; confirm suffix meaning on the quotation. |
| Does the sample represent serial supply? | Approved drawing revision, variant and required production traceability. | Lot identification, agreed inspection records and notice of changes that affect the approved running behaviour. |
The article mentions servo, robot and elevator contexts. It does not establish that an individual RCL bearing or completed system has passed a safety or customer approval. Define the exact component and required qualification with your engineering team.
Keep the flexible bearing separate from an ordinary support bearing.
The harmonic-reducer page explains a wave generator acting through a flexible bearing to produce controlled deformation of the flexible gear. It specifically notes repeated elastic deformation and its implications for materials, heat treatment and processing. [4] This is a different task from selecting a general shaft-support bearing.
Identify the position
State whether you need the wave-generator flexible bearing, an input/output support or an encoder bearing elsewhere in the reducer. Send the reducer section and interfaces. A request labelled “robot bearing” leaves those roles unresolved.
Describe deformation and duty
For the flexible-bearing route, provide the generator/interface drawing, intended deformation conditions, speed, torque duty and required life. Ask RCL which material, heat-treatment and manufacturing controls apply to the proposed drawing.
Agree assembly-level approval
Ask for assembly instructions, lubrication requirements and the test method for your reducer. Define sample approval and the critical process/material changes requiring reapproval. The public explanatory page does not publish a qualified life, torque or reducer size range.
Confirm the entity while opening the engineering discussion.
The official site gives Binhai Third Road 112 in Ningbo Hangzhou Bay New Area. [1] The China Bearing Industry Association’s member list records 宁波实隆轴承有限公司 at the same road number in Ningbo Qianwan New Area, with entry date 29 July 2022. [5] These are useful identity/address records; association membership does not qualify a particular bearing.
RCL’s technical-advantages page describes a team developing products around customer application requirements and a municipal R&D centre. [6] Ask for a documented review of your proposed assembly and the offered drawing. This review has not obtained a feasibility approval, current certificate validation, price, available stock or delivery commitment.
What should be fixed before the first sample order?
The component’s position, chosen bearing construction, accepted drawing and materials, operating/deformation conditions, sample test and acceptance limits, supplying entity, traceability deliverables and dated commercial terms. For the flexible route, include the agreed interfaces and mounting instructions.
Prepare an RCL application-specific request.
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
131 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationRCL · company introduction and official address ↗
RCL brand and Ningbo Shilong company identity, production focus and official site address.
- Manufacturer product pageRCL · 67-series thin-section description ↗
Metric thin-section positioning, explicit load-capacity consideration and related family navigation; no complete individual-part numerical table reviewed.
- Dated manufacturer application articleRCL · thin-section bearings in encoders, 18 September 2025 ↗
6700/6800 encoder context and RS/ZZ options; not a customer accuracy result, regulatory approval or universal suffix specification.
- Manufacturer product explanationRCL · harmonic-reducer bearing ↗
Flexible-bearing role and deformation/material/process concerns; no qualified torque, life or numerical operating envelope.
- Industry-association recordChina Bearing Industry Association · Ningbo Shilong member record ↗
Company/address and recorded membership date; not product certification or a factory audit.
- Manufacturer publicationRCL · technical advantages ↗
Application-led development and R&D-centre statements; no project feasibility approval obtained.
Report a source correction → · Return to inquiry checklist ↑
RCL published product scope reviewed
The manufacturer website describes thin-wall ball bearings for compact mechanisms.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.