BearingIndex
THE BEARINGINDEX DIRECTORY

Deep groove ball.

A familiar starting point for radial bearing requirements. Compare exact dimensions and manufacturer specifications.

Select using the exact manufacturer model, load conditions and documented specifications.

Find documented models
Deep groove ball family illustration

Published 2026-10-18

Deep-groove ball bearings: match the series before choosing the suffix

A 20 mm shaft does not identify the bearing you need. NSK lists its open 6204 as 20 × 47 × 14 mm, while its open 6304 is 20 × 52 × 15 mm. Both fit a nominal 20 mm bore, but the outside diameter and width change. A 6304 therefore cannot be selected as a drop-in replacement for a 6204 housing simply because the shaft size matches. These are NSK catalogue examples, not dimensions newly verified for every manufacturer listed here. [1][2]

Read this part of the specificationWhat it changes in this exampleWhat to keep on the purchasing drawing
Series: 62 or 63The two NSK examples have different outside diameters and widthsd, D and B, plus the selected manufacturer's shoulder and fillet requirements
Closure: open or a complete seal/shield suffixNSK's plain 6204 is open; its 6204DDUC3 has rubber contact seals on both sidesFull manufacturer designation and the closure construction
Clearance: CN or C3The two NSK product records specify different clearance classesThe class selected for the intended fits and operating conditions; do not replace it with a claim of “better quality”

NSK's 6204DDUC3 retains the 20 × 47 × 14 mm envelope of its open 6204, but that does not make their operating specifications identical. The manufacturer lists grease speed figures of 11,000 min⁻¹ for 6204DDUC3 and 17,000 min⁻¹ for open 6204. Keep each figure with its complete designation and lubrication heading. These catalogue figures do not approve an unknown machine duty, and they must not be assigned to another maker's 6204. [1][3]

Use the Chinese manufacturer's series route to narrow the enquiry

HCH's official menu separates metric 60, 62, 63, 68 and 69 series, 16000/6700, 62200/62300, inch R-series, and non-standard bearings. Select the matching route before comparing individual rows; an inch-series or special design cannot be inferred from a nearby metric number. The menu establishes published scope, not stock, a certified noise level or a promise that every size is made. [4]

For a replacement enquiry, carry across the original marking, d/D/B, closure, specified clearance and drawing revision. Compare the offered manufacturer's own row and mounting requirements. Where BearingIndex shows conflicting source values or an unconfirmed unit, resolve that field before using a dimension calculation. Identical outside dimensions alone do not establish interchangeable internal construction, grease or performance.

Continue with model-level evidence

- 6204: compare the separate maker records and their unit notes before selecting a configuration.

- 6907: read the manufacturer-specific dimensions and performance headings together.

- 6211: examine the distinction between bearing chamfer limits and the mating shoulder/fillet interface.

For a broader multi-manufacturer comparison, start with 6000 (12 published manufacturer records), 6002 (10), or 6004 (10). These counts come from the 18 October directory inventory and indicate comparison breadth, not independent testing or a quality ranking. The three task-specific links above have 7, 3 and 2 published manufacturer records respectively. Compare each maker’s own specifications; source count alone does not establish suitability for your equipment.

Sources and scope

1. NSK 6204: exact product dimensions, grease speed and open/CN properties; read 18 October 2026.

2. NSK 6304: exact 20/52/15 mm example; read 18 October 2026.

3. NSK 6204DDUC3: DDU contact seals on both sides, C3 and grease speed; read 18 October 2026.

4. HCH product navigation: manufacturer's published series routes, not an availability or performance audit; read 18 October 2026.

Dimensions to start with.

1357 documented models
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

A published bearing family describes product scope. It does not imply that every size or material is available.

Yuyao Xinfeng

Small ball bearings and custom assemblies

Published product scope · confirm exact model availability

SILL

Deep groove and tapered roller bearings

Published product scope · confirm exact model availability

SXA

Miniature and ultra-thin-wall ball bearings

Published product scope · confirm exact model availability

Youhe

Miniature precision ball bearings

Published product scope · confirm exact model availability

RAD

Ball bearings, track rollers and ceramic-ball variants

Published product scope · confirm exact model availability

ASBL

Miniature precision deep groove ball bearings

Published product scope · confirm exact model availability

HOTO

Miniature deep groove motor bearings

Published product scope · confirm exact model availability

YJB

Precision spindle and machine-tool bearings

Published product scope · confirm exact model availability

GJLB

Automotive and nonstandard deep groove bearings

Published product scope · confirm exact model availability

Jianye

Electric-motor-quality miniature bearings

Published product scope · confirm exact model availability

NBK

Deep groove ball bearings and custom variants

Published product scope · confirm exact model availability

Sihai

Deep groove bearings for motors and automotive use

Published product scope · confirm exact model availability