BearingIndex
THE BEARINGINDEX DIRECTORY

LYC

A buyer’s guide to LYC’s published bearing range, technical support and project qualification.

GENERAL & APPLICATION-SPECIFIC BEARINGS

Start with the application. Then qualify the exact bearing.

LYC’s public portfolio spans conventional ball and roller bearings as well as slewing and application-specific bearings. That breadth makes the first sourcing question important: are you replacing a catalogue item, qualifying a precision assembly, or developing a bearing for a particular machine? Manufacturer portfolio [1]

Prepare a sourcing inquiry
01

Three different conversations with LYC.

Use the route closest to your purchase. These are BearingIndex’s suggested inquiry paths, not a statement of availability or pre-approved product suitability.

Your starting pointUseful published materialWhat to send next
A catalogue replacementThe official download centre lists a general-bearing catalogue identified as 2022, alongside family-specific material. Check the document edition. [2]Full marking and suffixes, mounting dimensions, operating speed, load direction, clearance, sealing and lubricant. Ask the supplier to confirm the current drawing revision.
A machine-tool spindle or rotary tableLYC’s machine-tool page describes spindle and rotary-table bearing families. Published scope is broader than a model-specific performance commitment. [3]Assembly drawing, bearing arrangement, preload method, stiffness and runout targets, speed duty and thermal conditions. Specify how acceptance will be measured.
A wind-energy bearing projectThe wind-energy page distinguishes gearbox, yaw/pitch and main-bearing applications. [4]State the actual position and turbine platform. Provide the load spectrum, interfaces, lubrication and sealing requirements, and required qualification procedure.

Do not compare quotations until the drawing, suffixes, documentation and delivery scope match. A matching bore, outside diameter and width is a useful filter; it does not establish interchangeability.

02

Keep the brand, seller and production site separate.

This directory record identifies 洛阳轴承集团股份有限公司. The English site uses Luoyang Bearing Group Co., Ltd.; its footer names LYC Import & Export Corp. and gives 96 Jianshe Road, Luoyang. [1]

A 2026 Luoyang municipal report separately refers to the group’s Luolong factory area. This corroborates the named company and location context; it does not establish which plant would make your order. [7]

03

Turn testing capability into an acceptance plan.

LYC’s inspection page describes material checks, process inspection and dimensional metrology, and shows wind, railway and general-bearing testing categories. These are company-published capabilities; no test result for your purchase is established by that page. [5]

  1. Define the part and its conditions

    Agree the controlled drawing, material specification, fits, tolerances, clearance or preload, and intended operating conditions. Record any departure from the catalogue.

  2. Agree evidence before samples

    Identify required dimensional results, material/heat-treatment records and functional tests. Set the sample quantity, measurement method, acceptance limits and traceability requirements with your engineering team.

  3. Close the sample-to-production gap

    Ask how approved samples relate to serial production: site, process, drawing revision and change notification. Make the agreed records and acceptance conditions part of the purchase order.

A laboratory photograph or general testing capability does not prove that every shipped bearing receives every illustrated test. Request the inspection plan for the exact product and order.

04

If the bearing has already failed, change the brief.

LYC advertises technical consultation, failure analysis and fault detection. [6] For a repeat failure, our suggested starting point is an evidence package: original designation, hours in service, operating changes, installation and lubrication history, photographs and any available vibration or temperature records.

Ask the service contact how to preserve and submit the failed component before cleaning or dismantling it further. Agree the analysis scope, deliverable, cost and response time directly. None of those commercial terms has been verified here.

Does the documented model list show everything LYC makes?

No. The records below are the models currently documented in BearingIndex. Use the manufacturer’s catalogue for broader discovery, and obtain a current drawing before specification. A directory entry is not a stock listing.

Can a broad industry claim replace project approval?

No. An application page is a reason to start a technical discussion. Railway, wind-energy and other controlled projects still need their own applicable qualification, traceability and purchaser approval.

What is still unknown for a new order?

Current stock, minimum order, lead time, available production slot, quotation validity, delivery terms and order-specific certificates. Ask for dated written confirmation rather than inferring them from group scale.

YOUR NEXT STEP

Build an LYC inquiry that can reach the right technical team.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

49 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationLYC · corporate and product portal ↗

    Published product families and website contact identity. Group-level material, not a factory audit.

  2. Manufacturer publicationLYC · catalogue downloads ↗

    Document titles and catalogue edition. Download listing does not confirm current stock.

  3. Manufacturer publicationLYC · machine tools ↗

    Application and bearing-family scope. Individual performance requires a confirmed specification.

  4. Manufacturer publicationLYC · wind energy ↗

    Application positions; no order-specific approval inferred.

  5. Manufacturer publicationLYC · testing and inspection ↗

    Described inspection and testing activities, not reviewed batch test reports.

  6. Manufacturer publicationLYC · technical services ↗

    Advertised service categories; commercial terms require confirmation.

  7. External public recordLuoyang Municipal Government · industry visit, 8 May 2026 ↗

    Names the company and Luolong factory area. Does not certify a product or supplier.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.