Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball
6026
6026 is a deep groove ball designation documented on BearingIndex from 2 manufacturer publications. The published boundary dimensions are 130 × 200 × 33 mm. Every value below comes from that manufacturer’s own published material, with the date it was recorded.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Compare the recorded figures.
Property
Finding
Sources
Dynamic load rating
Ranges 102 – 105 kN across 2 sources
2
Static load rating
Ranges 93.9 – 96.8 kN across 2 sources
2
Limiting speed — grease
Ranges 2800 – 3000 rpm across 2 sources
2
Limiting speed — oil
All 2 sources publish 3600 rpm
2
Minimum corner radius
All 2 sources publish 2 mm
2
Reference mass
Ranges 2.93 – 3.15 kg across 2 sources
2
Where the figures differ, use the drawing from the manufacturer you buy from.
Calculated from the published values.
Figure
How it is obtained
Result
Radial section height
(D − d) / 2
35 mm
Mean diameter dm
(D + d) / 2
165 mm
C / C₀ load ratio (2 sources)
dynamic ÷ static load rating
LYC 1.09 · HOTO 1.08
Arithmetic on the figures above — not a bearing life calculation for your load case.
Small motor and miniature deep-groove bearings; official 60, 62 and 69 tables support a same-bore comparison, with speed-data and qualification limits made explicit.
Published ranges: Miniature deep groove ball bearings · 6000 and 6200-series motor bearings
29 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.
Fields absent from the recorded dataset.
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.
Ask the manufacturer for these when you enquire.
Other designations with the same 130x200x33 mm envelope.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies