BearingIndex
THE BEARINGINDEX DIRECTORY

SXA

SXA / New Century publishes miniature deep-groove bearings in steel, stainless and flange forms. Resolve the actual open, shielded or sealed envelope before approving a small motor or instrument assembly.

SXA · MINIATURE ENVELOPE AND BUILD

A basic model number does not settle the bearing’s width.

Ningbo New Century Bearing publishes steel and stainless deep-groove ranges, including miniature MR and inch R families, and flange variants. Its actual 603 detail and original catalogue separate open and shielded widths. For a compact mechanism, settle the complete supplied form and controlled drawing before treating two quotations as interchangeable. Actual product routes [1] 603 detail [2] Original catalogue [3]

Prepare a sourcing inquiry
01

Check the axial envelope before approving a 603 replacement.

The official web detail is titled 603ZZ/2RS, but its table labels the width columns as open type B and shield type B1. The original downloadable catalogue separates the model labels 603 and 603ZZ in the same row. Neither source provides a separately labelled 6032RS dimensional row in the material examined here. Do not map every number on the detail page automatically to every suffix in its title. Actual detail table [2] Catalogue, printed page 18 [3]

Published fieldOpen formShielded formBuyer decision
Catalogue model603603ZZKeep the full form in the order and drawing.
Width columns B / B135Check the offered axial envelope and shoulder/retention arrangement.
Chamfer r columns0.150.12Approve the actual shoulder interface from the controlled drawing.

These are the manufacturer’s displayed numerical entries, not newly assigned dimensions: explicit dimensional units were not established in the examined web detail/table heading. Obtain a current drawing with units and tolerances before sizing the housing. The row also shows d = 3 and D = 9. Do not infer that a separately offered sealed build has the same width or chamfer without written confirmation.

The speed header explicitly uses ×1,000 rpm, with grease 56 and oil 67 in the 603 row. This explains how to read the displayed scale; it does not approve either speed for a chosen sealed, greased or installed bearing. Ask for applicable conditions and the rating of the exact offered build. The displayed load numbers also need confirmed units and applicability before calculation. Web header and values [2] Catalogue row [3]

02

Turn a catalogue family into a complete supplied specification.

The site has separate steel and stainless routes for 60, 62, 63, 67, 68, 69, MR and inch R series, alongside steel/stainless flange categories. The stainless 60 route actually lists S603ZZ/2RS and other S-prefixed items; a category name alone does not establish the steel grade or an equivalent load, speed or corrosion rating. Actual navigation and steel range [1] Actual stainless listings [4]

Miniature metric or MR bearing

Send the complete model and drawing, including width, ring shoulders and closure. Identify the shaft/housing fits and the clearance required after assembly, rather than selecting only by bore.

Stainless version

Specify ring and ball grades and the real exposure: humidity, cleaning chemicals or intermittent water. Request material evidence and an agreed exposure test. Do not assume that the stainless prefix guarantees corrosion resistance in every environment.

Flange or inch R form

Provide flange diameter/thickness, axial seating and retention, or explicitly labelled inch dimensions and tolerances. Obtain the exact variant drawing; do not convert a family name into an assumed interchangeable part.

For a small motor, define start/run duty, speed, load, temperature, grease and fill, seal contact arrangement and numerical torque/noise acceptance. SXA’s homepage describes precision/noise grades and material-compliance claims, but they do not establish a delivered lot’s measurements or a food-contact or medical-device approval. Ask for the applicable current documents and test scope for the actual item. Manufacturer capability and application wording [5]

03

Use the historical process record to ask better audit questions.

A government-hosted environmental report dated June 2021 identifies Ningbo New Century Bearing at 88 Shengshan Avenue West Road, Cixi. It describes an expansion from an earlier approved 60-million-set project to a proposed 100-million-set deep-groove project, with expected completion in December 2021. That is historical project documentation; this review did not establish commissioning, current output or available delivery capacity from it. The homepage’s separate capacity statement is also a manufacturer statement, not a live production measurement. Original report, printed pages 3 and 7 [6] Homepage statement [5]

The report’s proposed route includes ring grinding/superfinishing, hydrocarbon cleaning, matching/assembly, demagnetising and cleaning, grease/cover operations and final inspection. Its raw-material table lists purchased inner and outer rings. The homepage separately describes a component factory. These sources do not establish that every present order starts from entirely in-house components. Ask which route and suppliers apply to the actual model and manufacturing site. Report, printed pages 8–11 [6] Component-factory statement [5]

  1. Identify the order’s route

    Request the current manufacturing location and a process map identifying purchased rings/balls/cages, outsourced operations and in-house final assembly and inspection.

  2. Connect the report to the delivered item

    Agree dimensional/clearance and vibration or noise methods, limits and units. Request calibrated-equipment and lot-linked release evidence for the exact grease, cage and closure.

  3. Control changes after sample approval

    Keep drawing revision, component sources and grease/closure build with the accepted sample. Agree approval before a source, process, site or material change affecting performance.

The environmental report documents a dated project and process description. It is not a product certificate, factory audit conclusion or proof of current order acceptance.

04

Approve the installed mechanism, then preserve that build for repeat supply.

The manufacturer publishes installation and storage guidance, including keeping parts clean, using appropriate tools and avoiding hammer blows. Apply the controlled instructions for the supplied bearing and your mechanism; generic guidance does not authorise changing its factory grease or assembly conditions. Actual application guidance [7]

Before sample assembly

Confirm the full suffix, drawing and units, shaft/housing fits, mounting-force path and closure/grease build. Check that the selected width and chamfer leave the specified seating, retention and running clearance.

The actual contact page lists 88 Shengshan Avenue West Road, Shengshan, Cixi, phone 0574-63542597, fax 0574-63542599 and [email protected]. Confirm legal contracting details, current certificate/issuer scope, sample and tooling costs, MOQ, present lead time and nonconformance handling for the exact approved item. No minimum order or delivery promise is inferred from the website. Actual contact page [8]

YOUR NEXT STEP

Prepare an SXA compact-bearing approval brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

296 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer product publicationSXA · actual steel range and product navigation ↗

    Actual series routes and steel listings; no controlled specification or interchangeable variant inferred from category names.

  2. Manufacturer table, browser readSXA · actual 603ZZ/2RS detail ↗

    Open/shield width and chamfer columns, d/D entries and explicit speed scale; no separately controlled 2RS row or dimensional/load units established.

  3. Original manufacturer PDF, visually examinedSXA · original downloadable catalogue ↗

    PDF page 11, printed page 18, separates 603 and 603ZZ and B/B1 values; drawings and values require current unit-bearing approval. Upload path is not treated as a publication date or current certificate.

  4. Manufacturer actual listingsSXA · stainless 60 series ↗

    S603ZZ/2RS and related listings; exact stainless grade, ratings and corrosion qualification not inferred.

  5. Manufacturer self-descriptionSXA · company and application statements ↗

    Miniature scope, component-factory and precision/noise/material-compliance statements; no independently verified output, lot test or medical/food-contact approval inferred.

  6. Original government-hosted June 2021 project reportCixi government · New Century expansion environmental report ↗

    Printed pages 3, 7–11 identify location, proposed expansion, purchased rings and process route; project target is not verified commissioning or present output.

  7. Manufacturer application guidanceSXA · installation and storage guidance ↗

    General cleanliness, tools and handling guidance; exact supplied bearing and controlled assembly instructions remain necessary.

  8. Manufacturer contact page, browser readSXA · actual contact page ↗

    Published address, phone, fax and sales email; no inferred MOQ, available capacity or delivery commitment.

Report a source correction → · Return to inquiry checklist ↑

SXA published product scope reviewed

The manufacturer website describes miniature and ultra-thin-wall ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.