BearingIndex
THE BEARINGINDEX DIRECTORY

Hardchn

Hardchn / ZXZC: miniature deep-groove bearings and rings, with a drawing-led guide to standard and non-standard parts, noise and lubrication.

HARDCHN · ZXZC

Choose the exact construction before accepting the catalogue claim.

Hardchn’s introduction describes miniature bearings under its ZXZC brand and bearing-ring manufacture, with rough processing, heat treatment, grinding and assembly in the stated production chain. Company introduction [1] Start by defining whether you need complete bearings, rings or a non-standard part. Those orders need different drawings and acceptance; company-wide output descriptions do not settle the offered configuration.

Prepare a sourcing inquiry
01

Use the readable catalogue—but leave unresolved values unresolved.

Reviewed partUseful evidenceRequired confirmation
635Its table explicitly gives bore/OD/width as 5 × 19 × 6 mm. [2]Full suffix, closure, materials, clearance, grease and agreed tolerances. Published base dimensions do not select the final motor-bearing construction.
608The table gives 8 × 22 × 7 mm, while text mixes sweeping-robot and air-conditioner-motor labels. Its static-load cell is written “138” under a kN header. [3]Ask for the corrected controlled sheet and application evidence. No silent decimal correction or load value is published here; the application headings do not prove an installed fitment.
Non-standard C28The entry has separate inner/outer-ring width and “sphere” fields, but its OD cell reads “2S.2”. [4]Ask for a dimensioned drawing explaining every field, units and tolerances. Do not convert ambiguous text into an assumed OD, profile or cross-reference.

The non-standard category also lists C35, PCN26 and PCN30. [5] Those names show a separate inquiry route; they do not establish common geometry or that a sample can be copied without a technical review.

02

The 635 technical tabs describe choices, not one universal build.

The material tab describes AISI 52100 or AISI 440C rings/balls and steel or nylon cage options. The noise tab uses EMQ wording without readable numerical acceptance limits. 635 technical tabs [2] Request the exact bill of materials and measurement standard for the proposed bearing; EMQ—electric-motor quality—needs an agreed test definition for your project.

Record the noise and clearance variant

State speed, load, fits, temperature and the starting/running-torque or vibration target. Ask which bearing-level test and installed-motor acceptance apply. The clearance tab contains both numbered groups and MC labels; agree the exact designation, measurement units and limits on the order, rather than treating these as interchangeable labels.

The product page also lists tube/bag and carton packing and asks for special requirements on the order. [2] Agree part/suffix and lot identification, corrosion/handling protection and quantity labels with the approved configuration. This guide does not establish current stock or a packing-service price.

03

Ring manufacture and finished bearings are separate procurement questions.

The company introduction publishes separate annual figures for completed bearings and bearing rings. The homepage instead contains casting-foundry/process language and a tonnage figure that is not reconciled with the bearing catalogue. [1] [6] These statements are not combined or presented as available capacity.

For a ring-only request, specify material, heat-treatment and delivery condition, machining allowance and the remaining operations on your side. Ask which site performs each process and which dimensional/raceway inspection records accompany delivery. A finished-bearing vibration statement does not accept a component-only shipment.

The English introduction’s asset wording also differs from the Chinese homepage figure, without a reconciled currency/translation basis. [1] [7] Financial scale and current output are left unverified. Ask for a dated part-specific quantity and production-window offer rather than using either figure to infer financial strength or delivery speed.

04

Connect Hardchn and ZXZC to the current Chinese entity and site.

The Chinese site names 宁波华驰轴承有限公司. Its Shizhu Road 501 address agrees in street/number with the English contact page in Jiaochuan, Zhenhai. [7] [8] The introduction calls ZXZC its bearing brand and describes a predecessor/renaming timeline. [1] Confirm the legal contracting entity and manufacturing-site address on the quotation; brand history is not a substitute for current registration and fulfilment responsibility.

The honour gallery labels ISO 9001, engineering-centre and high-tech records; older product wording also refers to TS16949. [9] [2] Current certificate validity, issuer and applicable product/site scope were not independently verified. Request complete current documents rather than assigning a badge from the gallery.

The government-hosted 2024 second-batch technology-based SME list contains the exact Chinese entity at entry 1001, number 2024330211A8004140. [10] This is dated enterprise identity context, not proof of your part’s precision, noise results or application qualification.

YOUR NEXT STEP

Prepare a Hardchn / ZXZC construction-specific inquiry.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

6 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationHardchn · company introduction and timeline ↗

    ZXZC identity, ring/finished-bearing process and separate scale statements; capacity/assets and named customer history not independently validated.

  2. Manufacturer part/technical pageHardchn · 635 table and interactive technical tabs ↗

    Explicit dimensions, material/EMQ/grease/clearance options and packing; each tab read, no blanket performance or current certificate conclusion.

  3. Manufacturer part pageHardchn · 608 product page ↗

    Explicit dimensions, mixed application wording and unresolved static-load entry; no silently corrected rating or fitment.

  4. Manufacturer part tableHardchn · C28 non-standard page ↗

    Named part and geometry fields; ambiguous OD text left unresolved, requires controlled drawing.

  5. Manufacturer catalogueHardchn · non-standard category ↗

    C28/C35/PCN26/PCN30 navigation; no common geometry or stock inferred.

  6. Manufacturer publicationHardchn · English homepage ↗

    Casting-process/tonnage and service statements not reconciled with bearing/ring figures.

  7. Manufacturer publication华驰 · Chinese official homepage ↗

    Chinese entity, Shizhu Road footer and asset wording differing from English; financial/capacity claims not adopted.

  8. Manufacturer contact publicationHardchn · contact page ↗

    Shizhu Road 501, Zhenhai and export-contact route; current fulfilment site still requires order confirmation.

  9. Manufacturer document galleryHardchn · honour gallery ↗

    Named document headings; validity, issuer and complete current product/site scope not independently verified.

  10. Dated government enterprise recordNingbo · 2024 second-batch technology-based SME list ↗

    Exact Chinese entity and 2024330211A8004140, entry 1001; not product qualification or order capacity.

Report a source correction → · Return to inquiry checklist ↑

Hardchn published product scope reviewed

The manufacturer website describes miniature deep groove motor bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.