BearingIndex
THE BEARINGINDEX DIRECTORY

6300

BOUNDARY DIMENSIONSUNIT / mm
W = ? mmD = 35 mmd = 10 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

6300

6300 is a deep groove ball designation documented on BearingIndex from 7 manufacturer publications. The publishing works are in Zhejiang, Fujian provinces, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Compare the 7 publications

Manufacturers publish different values for this designation.

B: 11 / 12 mm. Confirm the dimension against the specific manufacturer drawing before specifying.

What each manufacturer published.

ManufacturerBore (mm)Outside diameter (mm)Width (mm)Dynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Reference mass (kg)Source recorded
Sihai
6300
103511————————2026-09-24 source ↗Request
CZ
6300
103512————————2026-09-24 source ↗Request
Runstar
6300
103511———————0.0532026-09-24 source ↗Request
Yuyao Global
6300
103511————————2026-09-24 source ↗Request
Hardchn
6300
1035117.653.4822000260000.6———2026-09-24 source ↗Request
INYOUNG
6300
1035118.13.452200026000———0.0522026-09-24 source ↗Request
Yuyao Xinfeng
6300
1035117.643.47——0.676.35—2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.

Compare the recorded figures.

PropertyFindingSources
BoreAll 7 sources publish 10 mm7
Outside diameterAll 7 sources publish 35 mm7
WidthRanges 11 – 12 mm across 7 sources7
Dynamic load ratingRanges 7.64 – 8.1 kN across 3 sources3
Static load ratingRanges 3.45 – 3.48 kN across 3 sources3
Limiting speed — greaseAll 2 sources publish 22000 rpm2
Limiting speed — oilAll 2 sources publish 26000 rpm2
Minimum corner radiusAll 2 sources publish 0.6 mm2
Reference massRanges 0.052 – 0.053 kg across 2 sources2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 212.5 mm
Mean diameter dm(D + d) / 222.5 mm
C / C₀ load ratio (3 sources)dynamic ÷ static load ratingHardchn 2.2 · INYOUNG 2.35 · Yuyao Xinfeng 2.2

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 6300.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 6300

Hardchn

Ningbo, Zhejiang, China

Miniature deep groove motor bearings

Hardchn identifies ZXZC bearings and a separate ring-production route. Its 635/608 product tables and C28 non-standard entry provide useful starting evidence, but table anomalies, general material/grease options and inconsistent scale statements need supplier confirmation.

Published ranges: 60-, 62- and 63-series ball bearings · 68- and 69-series ball bearings · Nonstandard deep groove designs

6 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Hardchn about 6300

INYOUNG

Taizhou, Zhejiang, China

Ball and roller bearings from Wenling

INYOUNG publishes ball and roller bearing families from Wenling. Its deep-groove tables show why bore size alone is insufficient for replacement, while its material pages distinguish bearing-steel and stainless options. Obtain the current model drawing and confirm the offered material, closure and lubrication; online access limitations and catalogue inconsistencies remain unresolved.

Published ranges: Deep groove ball bearings · Cylindrical and tapered roller bearings · Spherical roller bearings · Angular contact bearings

93 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask INYOUNG about 6300

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about 6300

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 6300

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 6300

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 6300

Applications the publishing works state.

ApplicationStated by
Air compressorsINYOUNG
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesYuyao Xinfeng
Brushless motorsCZ
Communications equipmentYuyao Global
DronesCZ
Electric motorsHardchn
Fishing tackleRunstar
Garden toolsCZ
GeneratorsINYOUNG
Household appliancesSihai, Yuyao Global
Medical equipmentRunstar, Yuyao Global
MotorcyclesINYOUNG
Office equipmentSihai
Power toolsCZ, Sihai
Precision instrumentsRunstar
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
6300-2RS10 × 35 × 11Deep groove ball1
6300-2RZ10 × 35 × 11Deep groove ball1
6300E10 × 35 × 11Deep groove ball1
6300ZZ10 × 35 × 11Deep groove ball1
6300ZZ/2RS10 × 35 × 11Deep groove ball1
6301—Deep groove ball5
6301-2RZ12 × 37 × 12Deep groove ball1
6301E12 × 37 × 12Deep groove ball1
6301T1X12 × 37 × 12Deep groove ball1
6301ZZ/2RS12 × 37 × 12Deep groove ball1
6302—Deep groove ball5
6302-2RZ15 × 42 × 13Deep groove ball1
6302E15 × 42 × 13Deep groove ball1
6302T1X15 × 42 × 13Deep groove ball1
6302ZZ/2RS15 × 42 × 13Deep groove ball1
6303—Deep groove ball5
6303-2RZ17 × 47 × 14Deep groove ball1
6303E17 × 47 × 14Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 6300.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. Runstar · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Yuyao Global · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. Hardchn · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. INYOUNG · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  7. Yuyao Xinfeng · 6300 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.