Huizhou Sliding Bearings
Hefei Huizhou specialises in sliding-bearing families including SF-1 multilayer bushes, SF-2 boundary-lubricated bushes and JDB solid-lubricant bronze designs. Their published formulations and lubrication requirements differ. Release the exact material, installed fit and duty; do not treat the entire no-oil catalogue as lead-free or universally maintenance-free.
Choose the sliding material and installed fit before accepting “no oil”.
Hefei Huizhou Oil-Free Sliding Bearing Factory (合肥徽轴无油滑动轴承厂) describes a processing business for sliding bearings, including SF-1, SF-2, JDB, JF800, FB090, FU and FZ families and custom work. These include different bearing materials and mechanisms, not one universal maintenance-free replacement. Match the construction to the actual shaft, housing, motion and lubrication arrangement. Official company scope [1]
SF-1 and SF-2 have different sliding layers and maintenance assumptions.
| Official family | Published construction | What to resolve on the order |
|---|---|---|
| SF-1 | Modified PTFE and lead sliding layer, copper-powder layer and low-carbon steel backing. Actual material description [2] | Confirm exact formulation, material restrictions and permitted dry or lubricated duty; avoid a universal lead-free claim. |
| SF-2 | Modified POM and lead, with lubricant-retaining pockets. The page explicitly requires grease to fill the surface at assembly. Actual material and grease instruction [3] | Approve grease, replenishment interval and allowed boundary-lubrication duty; do not specify unqualified continuous dry running. |
| JDB-650 | Copper-alloy base with embedded solid lubricant, with different alloy and lubricant options. Actual JDB detail [4] | Freeze alloy and solid-lubricant formulation against actual medium, motion and load. |
The catalogue separately names SF-1W and SF-2Y lead-free variants. A separate listing is a reason to obtain that variant’s controlled composition and relevant declaration, not proof that standard SF-1/SF-2 or every supplied batch meets the buyer’s material restrictions. Do not derive food, potable-water, medical or chemical-service approval from the company’s broad application list. Company application descriptions [1] Separate variant navigation [2]
Give motion type, contact pressure, speed, oscillation angle or reciprocating stroke, starts/stops, temperature, medium and contamination. Identify mating-shaft material, hardness and finish. Ask for permitted combined duty and a representative wear/clearance test; independent catalogue maxima do not establish a simultaneous operating envelope.
JDB-650 needs a controlled alloy and insert specification.
The official JDB-650 introduction identifies ZCuZn24Al6 and embedded solid lubricant for applications such as intermittent or oscillating high-load motion. The same page then presents additional alloy columns and distinguishes graphite/additive and other lubricant compositions for different media. A JDB family code alone does not define the actual base alloy and inserts. Actual alloy and lubricant tables [4]
For a new bush or sliding plate
Specify dimensions, flange/thrust features if required, locating holes, bearing-surface area, insert arrangement and permissible wear. State exposure to air, water or process fluid and what lubrication is available.
For a maintenance replacement
Supply the original drawing and failed-part condition, shaft/counterface measurements, load cycle and existing clearance. Ask whether the proposed alloy and lubricant change requires new mating-part or duty validation.
The page uses different units in its general PV table and alloy-reference table. Obtain a corrected, model-specific technical sheet with units, lubrication conditions and applicable limits before calculation. Do not combine a temperature, load and speed from different rows into a guaranteed rating.
Approve material evidence, insert retention and finished dimensions on a traceable sample. For application-specific acceptance, agree running-in, friction/wear and temperature checks using the intended counterface and medium; a generic self-lubricating description is not a wear-life result.
Inspect the bush in its specified housing, not only in the free state.
Huizhou’s actual installation instructions describe pressing with a mandrel, cleaning the bush and housing, avoiding direct hammering, and telling the supplier when the housing is thin or made from deformable material such as aluminium. The instructions describe an internal-bore check after pressing into a reference bore based on the middle of H7, rather than simply measuring a loose wrapped bush. Actual installation and gauge instructions [5]
- Agree the housing and shaft. Release the actual drawing, material, wall thickness, housing tolerance, shaft geometry and edge/chamfer requirements.
- Agree the press-fit method. Confirm mandrel geometry, entry support and permitted assembly lubricant. Protect the sliding layer and check that the housing has not distorted.
- Agree the inspection state. Define the reference housing or actual assembly, installed bore/clearance, gauge method, and which measurements are taken before or after pressing.
- Check movement in service conditions. Verify friction, clearance and representative wear after running-in; agree acceptance thresholds with the buyer’s engineering team.
The supplier refers generally to DIN 1494. The standards publisher lists DIN ISO 3547-1:2023-10 as current, covering dimensions for wrapped bushes. Agree the applicable standard, edition, material specification and inspection method explicitly. A catalogue’s standards reference is not proof of conformity, and a wrapped-bush dimensional standard does not certify all solid JDB or other product families. Only publisher metadata has been reviewed here, not the paid standard’s full requirements. Actual publisher record [6]
Send one material-and-fit specification to the responsible factory contact.
The official contact gives Zhanbei community, Yaohai Industrial Park, Xinzhan District, Hefei, 15375315116, 0551-67681223, Ms Liu and [email protected]. Confirm the precise current factory/audit/receiving address and contracting name before arranging a visit or order. Actual factory contact [7]
For custom processing, request a feasibility response covering raw material, bonding/sintering or insert operations as applicable, outsourced steps, dimensional inspection and lot traceability. Ask for current material and process evidence relevant to the chosen construction; broad industry applications do not establish customer or programme approval.
Request an itemised quote stating exact family/formulation, dimensions and installed-fit requirements, sample approval, quantities, tooling, lead time, packing/storage protection and delivery terms. Keep the agreed lubrication instructions, drawings and inspection state with the order. Define claim evidence such as lot identification, housing/shaft measurements and the operating conditions observed.
Prepare a Huizhou sliding-bearing enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
1 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official actual company pageHuizhou · company introduction ↗
Sliding-bearing processing, separate families and broad application/standard descriptions; no programme approval inferred.
- Official actual material and tolerance detailHuizhou · SF-1 ↗
PTFE/Pb construction, separate variant listings and tolerance table; no universal lead-free or duty guarantee.
- Official actual material and lubrication instructionsHuizhou · SF-2 ↗
POM/Pb and assembly grease requirement, boundary-lubrication conditions and dimensional data.
- Official actual alloy/lubricant tablesHuizhou · JDB-650 ↗
ZCuZn24Al6 and separate alloy/lubricant options; differing PV units require corrected controlled data.
- Official actual installation/inspection instructionsHuizhou · installation ↗
Mandrel pressing, thin/deformable housing warning, installed reference-bore gauge checks.
- Standards publisher metadata actually readDIN Media · DIN ISO 3547-1:2023-10 ↗
Current wrapped-bush dimensional-standard record; paid full requirements not read and supplier conformity not established.
- Official actual contact pageHuizhou · contact ↗
Hefei Xinzhan/Yaohai/Zhanbei, Ms Liu, 15375315116, 67681223 and email; precise present receiving/site to confirm.
Report a source correction → · Return to inquiry checklist ↑
Huizhou Sliding Bearings published product scope reviewed
The manufacturer website describes self-lubricating bushings and plain bearings.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.