BearingIndex
THE BEARINGINDEX DIRECTORY

Mosheng

Mosheng / NH: miniature and small deep-groove bearing selection with a close reading of the official data sheet and source limitations.

MOSHENG · NH

Make the small bearing’s complete variant visible.

Ningbo Mosheng presents NH as its bearing brand and describes miniature and small deep-groove ball bearings, including metric, inch and flange routes. Company profile [1] Its online data sheet pairs ordinary and flanged designations and separates grease/oil speed columns. Bearing data sheet [2] Use that detail to identify the intended construction, then ask for the applicable drawing and conditions.

Prepare a sourcing inquiry
01

A paired catalogue row still contains different constructions.

The NH data sheet includes pairs such as 673 / F673, MR83 / MF83 and 608 / F608 under ordinary deep-groove and flange headings. Some rows list ZZ/RS options; the table also separates several flange/width dimensions and grease/oil speed fields. [2] These are manufacturer catalogue entries, not confirmed available stock.

Catalogue distinctionWhy it matters to the requestWhat to confirm
Ordinary versus flange designationA flange is an additional locating interface, not just a name prefix.Complete designation, flange diameter/thickness, shoulder clearance and installed axial position on the drawing.
ZZ / RS or another closureThe exact closure and lubricant belong to the approved variant.Offered construction and suffix meaning, contamination conditions, torque/noise requirements and grease details.
Separate grease/oil speed columnsAn operating limit must match the actual lubrication and construction.Applicable units, test/rating basis and limits for the quoted closed or open variant; do not carry a column figure into another lubrication arrangement.

The reviewed table has blank fields in some entries and does not make every unit/condition explicit in its visible header. This guide therefore does not republish numerical load or speed values. Request the current controlled sheet for your selected part; blank cells are missing information, not zero or proof that a feature is unnecessary.

02

Name the interface and running problem in the office-equipment RFQ.

The office-automation catalogue explicitly presents shielded, black-sealed, flanged, open and shielded special-design products. [3] It is a useful construction list, but those labels do not specify the individual machine, material, seal performance or running class.

Locating a small shaft

Send the housing section and locating feature, with available drawing tolerances. Identify whether the proposed flange or special-design shield must clear adjacent parts. Include a photograph for identification, but retain measured dimensions and the controlled drawing as the approval basis.

Managing start/stop and noise

Describe the mechanism, speed range, operating cycle, temperature and required starting/running behaviour. Explain whether noise is measured on the bearing, the motor or the complete device. Agree acceptance under the same assembly conditions used for the sample.

Changing an existing variant

Record the original markings, closure, lubricant and service symptom. Ask for the proposed change and its effect on the assembly. A product image with a black seal does not identify seal material or establish compatibility with your environment.

03

Ask for NH-specific lubricant evidence rather than importing another brand’s claims.

The official “Lubrication Solutions” page contains broad lubrication-management text that explicitly refers to SKF, alongside claims about long experience and automatic systems. [4] This review cannot attribute those capabilities, test programmes or lubricant products to Mosheng merely because the text appears on its website.

A more specific NH source is the R&D-centre page: it names bearing-life, sealed-bearing grease-leakage/dust/temperature-rise, roughness, roundness and vibration testing equipment. [7] Ask which applicable method and report can be provided for your offered variant; this is an equipment description, not a passing result.

For a lubricated NH bearing

Ask Mosheng to identify the grease manufacturer/product code, base-oil/thickener information where needed, fill requirement and compatibility with the proposed seal and duty. Agree how the lubricant and batch are traceable to the approved bearing.

For a special requirement

State the relevant temperature, torque, noise, contamination or material-contact condition. Request the specific supporting document and product scope. Do not infer food-contact, medical, environmental or other qualification from a general lubrication article.

04

Resolve the contact and legal name before exchanging controlled drawings.

The official company page identifies Ningbo Mosheng Bearing Co., Ltd. at No. 1698 Zhenluo Road, Jiaochuan, Zhenhai, Ningbo. [1] A government-hosted 2022 high-tech enterprise recognition list names 宁波摩盛轴承有限公司 in Zhenhai, with record GR202233101571. [5] That is a historical entity record, not proof of current recognition or a product quality certificate.

The official pages display a sales mailbox whose footer click target is different from the visible address. [6] Open the contact page and confirm the intended receiving address with the company before sending sensitive drawings. This guide does not select an unverified mailbox or claim that an inquiry has been sent.

What remains to qualify for serial purchase?

The exact contracting and manufacturing entity, current certificate/site scope if required, controlled bearing variant, sample and lot-inspection plan, lubricant traceability, quantity and dated commercial terms. Corporate production figures and website equipment photographs do not answer available stock or delivery timing.

YOUR NEXT STEP

Prepare an NH miniature-bearing inquiry.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

27 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationMosheng / NH · company profile ↗

    Mosheng identity, NH product context, metric/inch/flange routes and address; undated scale and certification statements are not current order evidence.

  2. Manufacturer numerical catalogueNH · online bearing data sheet ↗

    Ordinary/flange designation pairs, closure options and table structure. Units/conditions and incomplete fields require a controlled part sheet; no numerical ratings republished here.

  3. Manufacturer catalogueNH · office-automation bearing catalogue ↗

    Published closure/flange/open/special-design labels; not complete material or machine qualification.

  4. Manufacturer-hosted technical textMosheng · Lubrication Solutions page ↗

    Contains explicit references to SKF; does not establish NH ownership of the described lubricant products, systems or experience.

  5. Dated government recordGovernment-hosted Ningbo 2022 high-tech enterprise recognition list ↗

    2022 company name/district/recognition record; not current validity or a bearing-product approval.

  6. Manufacturer contact publicationMosheng · contact page and footer ↗

    Contact route to confirm directly; visible mailbox and footer mailto target differ. No message has been submitted.

  7. Manufacturer publicationMosheng / NH · R&D centre ↗

    Named bearing-life, grease-leakage/dust/temperature-rise and dimensional/running test equipment; not an order-specific report or audited test result.

Report a source correction → · Return to inquiry checklist ↑

Mosheng published product scope reviewed

The manufacturer website describes miniature and small deep groove ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:33

Source documentation retained for editorial review.