NBK
NBK / Ningbo Zhuang Hong Yi: standard and custom ball-bearing enquiries, including two-row and steel-ring/ceramic-ball builds.
Choose the complete build before comparing the catalogue number.
Ningbo Zhuang Hong Yi publishes NBK-branded standard and custom bearings, with separate single-row, two-row and self-aligning routes. The 5200 and Q523 pages give concrete specifications and steel/ceramic-ball options; each option still needs its own offered configuration, drawing and application approval. Brand/manufacturer [1] 5200 [2] Q523 [3]
5200 and Q523 start different dimension and speed discussions.
| NBK reference | Published d / D / width | Published grease / oil speed | Before sample approval |
|---|---|---|---|
| 5200 | 10 / 30 / 14.3 mm | 14,000 / 19,000 rpm | Complete closure, material and lubricant build; shaft/housing interface and installed load/speed duty. |
| Q523 | 3 / 10 / 6 mm | 22,000 / 29,000 rpm | Full Q523 drawing/reference; small-shaft fit, axial stack and actual sample torque/noise. |
These values come from NBK’s actual two-row product pages, not another maker’s similarly named series. Both list GCr15 rings, a steel cage, customisable clearance and GCr15 or Si₃N₄ ball options. The pages label precision P6 (customisable); establish the offered specification and measured acceptance rather than treating the label as a complete geometry/noise qualification. 5200 original specification [2] Q523 original specification [3]
The product pages identify CAD for a double-sided light-contact form and say open or double-shielded CAD is supplied on request. Ask for the actual offered closure’s file and revision, and check it against the quotation/sample. The reviewed CAD text does not establish that a file has been downloaded or that all builds share an identical section. Their printed −30 to100°C fields are marked customisable; obtain the specific grease, seal/cage and material limits before approving a thermal duty.
The supplier compares the two-row design with a pair of single-row bearings. Do not replace an approved pair by that description alone: compare spacing, fits, axial support, clearance/stiffness and actual duty in the whole assembly.
Ceramic balls do not make the complete bearing all ceramic.
NBK’s ceramic page explicitly combines GCr15 steel rings with Si₃N₄ ceramic balls. Its marketing lists insulation, speed, wear and corrosion/temperature benefits, but does not provide an order-specific test voltage, high-temperature limit or life result. Keep ring material, cage, seals and lubricant in the decision; do not extend ceramic-ball properties to the entire steel-ring assembly. Actual hybrid construction [4]
For a motor electrical-duty enquiry
Provide the actual electrical environment and installed mechanical duty. Ask for the proposed configuration and relevant insulation/test method, conditions and acceptance. Approve the installed assembly rather than relying on an “insulator” label.
For speed, moisture or temperature
Agree the complete BOM and lubrication/closure limits, operating speed/load and environmental trial. Request measured torque/temperature and wear or corrosion evidence as applicable; do not assume a steel-ring hybrid is corrosion-proof or can run unlubricated.
The supplier offers ceramic-ball options across standard and custom ranges. Obtain the actual proposed drawing and ratings for the selected option; the catalogue’s steel/ceramic alternative field does not establish that every load/speed figure was independently verified for both builds.
Ask which operations and components belong to the offered plant.
The official process illustration shows ring machining/heat treatment/grinding/superfinishing, steel-ball and cage production, followed by assembly, washing, inspection and rust prevention. A government-hosted expansion report for the exact Ningbo company separately lists purchased balls, rings, cages and covers/seals, with heat treatment, grinding, assembly, cleaning and grease/cover operations at the project. Those publications describe different scopes; neither alone proves that every component in your order is made in-house today. Official process illustration [5] Original project report [6]
- Identify the offered route: ask which plant performs each operation and which components/processes are purchased or subcontracted. Keep the approved material/component suppliers and change responsibilities on the order record.
- Request lot-linked evidence: material and heat-treatment records, ring geometry/surface inspection, ball/cage and closure traceability, clearance selection, grease identity/fill and final torque/noise method.
- Qualify repeat production: retain the drawing/BOM revision and tested sample lot, agree sampling and installed-duty acceptance, then define component/process/site changes requiring notification or requalification.
The report describes a proposed expansion from35 to80 million bearings/year; the company page states capacity near100 million. These are different publication figures and scopes, not evidence of current available capacity or a contradiction resolved by averaging. Request a dated slot for the exact build and quantity. The environmental report is not a quality certificate or proof that proposed expansion is completed. Company capacity statement [1] Proposed project capacity [6]
Keep live ISO query results separate from an old IATF image.
| System record | Reviewed evidence | Scope and buyer boundary |
|---|---|---|
| ISO9001:2015 · 02024Q0216R5M | Issuer query returned valid on8October2026; issued25January2024, valid through24January2027. | Exact Ningbo entity, precision-bearing production; management system, not individual model/application approval. |
| ISO14001:2015 · 02024E0143R5M | Issuer query returned valid on8October2026 with the same printed issue/expiry dates. | Environmental management of the production scope; no bearing performance or electrical-insulation rating. |
| Manufacturer-displayed IATF16949:2016 | Image prints6March2022–5March2025. | Deep-groove manufacture excludes product design, clause8.3; obtain a current issuer/IATF record before relying on automotive system status. |
The ISO queries were actually submitted to Beijing ZhongDaHuaYuan and matched 宁波庄宏亿轴承有限公司. Results are dated snapshots. Original ISO images identify Xinqiao Village near Liangzhou Road, while contacts describe the Yuyao Yangming technology parkB zone; confirm the precise offered manufacturing site and any annex rather than assuming every sales office is covered. Original manufacturer certificates [7] Actual issuer query route [8] Official factory/contact description [9]
Agree sample scope and nonstandard MOQ before release.
The homepage advertises free samples and shipping, and states a minimum order applies to custom products without publishing a universal number. Ask whether your exact steel/hybrid/custom build is eligible, how many samples are offered, delivery destination, tooling/engineering costs, lead time and repeat-order MOQ. Do not treat promotional wording as an accepted quotation. Actual sample/custom statements [10]
The official quotation form asks model, quantity, desired delivery and custom requirements. Attach or request the controlled drawing/BOM revision and numerical acceptance alongside those fields; agree tooling ownership, marking and change approval for private-label supply. The confirmed contact publication gives [email protected], factory0574-62501119 and business manager13925720729. Use the factory/contracting entity and authorised contact relevant to the order; a website office listing is not proof of independent local manufacturing or stock. Quotation requirements [11] Published contacts [9]
Prepare an NBK standard, hybrid or custom enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
32 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationNBK · company and brand ↗
Taiwan/Ningbo history, NBK and stated capacity; no order-specific available capacity.
- Manufacturer model specificationNBK · 5200 product specification ↗
10/30/14.3mm and14000/19000rpm, material/options/tolerance/CAD text; no file download or approval inferred.
- Manufacturer model specificationNBK · Q523 product specification ↗
3/10/6mm and22000/29000rpm; complete proposed configuration requires confirmation.
- Manufacturer construction/benefit claimsNBK · ceramic-ball route ↗
GCr15 rings/Si3N4 balls; general claims not whole-bearing test or numerical guarantee.
- Manufacturer diagram, visually readNBK · original manufacturing illustration ↗
Displayed ring/ball/cage/assembly steps, not proof all operations in-house for every order.
- Primary project reportNingbo Zhuang Hong Yi · government-hosted expansion report ↗
Original74-page PDF read, purchasedcomponents and proposed35→80million/year; not approval/completion/current output.
- Manufacturer documents, visually readNBK · original system images ↗
ISO precision-production/Xinqiao site and IATFexpiry2025/design exclusion; images alone not current status.
- Primary issuer, actual queriesZDHY · certificate queries ↗
02024Q0216R5M and02024E0143R5M submitted, exact entity/currentvalid returned8October2026 through24January2027; dated snapshots.
- Manufacturer contact publicationNBK · contacts and factory route ↗
Yuyao parkB factory and sales contacts; office listings not independent manufacturing/stock evidence.
- Manufacturer commercial statementsNBK · homepage sample/custom terms ↗
Sample/shipping promotion and unspecified custom MOQ; actual eligibility/quotation to confirm.
- Manufacturer enquiry routeNBK · quotation form ↗
Actual model/quantity/delivery/custom fields reviewed; no enquiry sent or quote obtained.
Report a source correction → · Return to inquiry checklist ↑
NBK published product scope reviewed
The manufacturer website describes deep groove ball bearings and custom variants.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.