BearingIndex
THE BEARINGINDEX DIRECTORY

696 — 6 × 15 × 5 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 5 mmD = 15 mmd = 6 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

696

696 is a deep groove ball designation documented on BearingIndex from 5 manufacturer publications. The published boundary dimensions are 6 × 15 × 5 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
6 mm
Outside D
15 mm
Width B
5 mm

Compare the 5 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Reference mass (kg)Source recorded
Sihai
696
—————2026-09-24 source ↗Request
CZ
696
—————2026-09-24 source ↗Request
Yuyao Global
696
—————2026-09-24 source ↗Request
RCL
696
1.480.640000450000.00362026-09-24 source ↗Request
NBK
696
1.470.5993500042000—2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 1.47 – 1.48 kN across 2 sources2
Static load ratingRanges 0.599 – 0.6 kN across 2 sources2
Limiting speed — greaseRanges 35000 – 40000 rpm across 2 sources2
Limiting speed — oilRanges 42000 – 45000 rpm across 2 sources2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 24.5 mm
Mean diameter dm(D + d) / 210.5 mm
C / C₀ load ratio (2 sources)dynamic ÷ static load ratingRCL 2.47 · NBK 2.45

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 696.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 696

NBK

Ningbo, Zhejiang, China

Deep groove ball bearings and custom variants

NBK’s actual 5200 and Q523 pages separate dimensions, tolerance fields, steel/Si3N4 ball options and grease/oil speeds. Its ceramic route is a steel-ring hybrid proposal, not an all-ceramic corrosion or temperature guarantee. Reconcile actual in-house/outsourced manufacturing with the offered order; ISO9001 and ISO14001 queried valid on2026-10-08, while the displayed IATF image expired in2025 and requires a current record.

Published ranges: Deep groove ball bearings · Customer-specific nonstandard bearings

32 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask NBK about 696

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 696

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 696

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 696

Applications the publishing works state.

ApplicationStated by
Automotive systemsSihai, Yuyao Global
BicyclesRCL
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Encoders and motorsRCL
Garden toolsCZ
Household appliancesSihai, Yuyao Global
Medical equipmentYuyao Global
Office equipmentSihai
Power toolsCZ, Sihai
RoboticsRCL

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Other designations with the same 6x15x5 mm envelope.

DesignationBearing familyWorks
696 ZZDeep groove ball2
696ZZ/2RSDeep groove ball1
S696ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
690010 × 22 × 6Deep groove ball7
6900zz10 × 22 × 6Deep groove ball1
6900ZZ/2RS10 × 22 × 6Deep groove ball1
690112 × 24 × 6Deep groove ball6
6901zz12 × 24 × 6Deep groove ball1
6901ZZ/2RS12 × 24 × 6Deep groove ball1
690215 × 28 × 7Deep groove ball5
6902ZZ/2RS15 × 28 × 7Deep groove ball1
690317 × 30 × 7Deep groove ball5
6903ZZ/2RS17 × 30 × 7Deep groove ball1
690420 × 37 × 9Deep groove ball5
6904ZZ/2RS20 × 37 × 9Deep groove ball1
690525 × 42 × 9Deep groove ball5
6905ZZ/2RS25 × 42 × 9Deep groove ball1
690630 × 47 × 9Deep groove ball5
6906ZZ/2RS30 × 47 × 9Deep groove ball1
690735 × 55 × 10Deep groove ball3
6907ZZ/2RS35 × 55 × 10Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 696.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 696 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 696 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. Yuyao Global · 696 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. RCL · 696 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. NBK · 696 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.