BearingIndex
THE BEARINGINDEX DIRECTORY

NBKJ-B

NBKJ-B / Ningbo Kejie: miniature and small deep-groove bearing enquiries, with separate coated and outer-sphere product routes.

NBKJ-B / KEJIE · SMALL BEARINGS · SPECIAL INTERFACES

Specify the working surface as carefully as the bearing inside it.

Ningbo Kejie describes conventional and customer-specific miniature/small deep-groove manufacture. Alongside 6000/6200/6300, thin-series, 16 and R routes, its official navigation separates coated and outer-sphere products. Those categories call for different interface drawings and qualification evidence; the reviewed category pages do not provide a complete numerical build specification. Company [1] Coated category [2] Outer-sphere category [3]

Prepare a sourcing inquiry
01

Two published categories, two different approval packages.

Coated bearing / component

The Chinese site calls this 包胶 and the English site uses “Adhesive coating series.” Neither label establishes the polymer, hardness or coating geometry. Provide the working-surface section, mating rail/part, load and contact pattern; request coating material/grade, hardness test method, profile/runout limits, bond acceptance and wear/environmental trial conditions. Specify the internal bearing closure, clearance and lubricant separately. Actual category [2] English terminology [4]

Outer-sphere bearing

The official route is 外球面 / “Outer sphere series.” Obtain its actual drawing before assuming an insert bearing, a supplied housing or a particular shaft-locking method. If the offered assembly uses a spherical housing seat, establish the seat dimensions and permitted movement; if it includes a locking feature, define the shaft interface, assembly procedure and retention acceptance. Ask explicitly what is included in the quotation. Actual category [3]

For a conventional bearing enquiry, retain the complete model/suffix and request controlled d/D/B, tolerances, closure and lubricant. The website’s Φ3–Φ50 range statement does not identify a full dimension table or define every variant; this review does not convert that shorthand into bore coverage. Do not assign a coated component’s outside working diameter or a spherical assembly’s housing dimensions from a basic bearing-family name. Published range statement [1]

02

Use the published equipment list to ask for an order-specific report.

Published equipmentEvidence to request for your buildWhat the list does not establish
Bore inspection machine, optical image instrument and profilometerDrawing-linked bore/profile measurements, datum/fixture, sampling and calibration records; agree separate coating profile/runout inspection if relevant.No numerical tolerance capability or coating metrology is established by an equipment label.
Rockwell hardness tester, metallographic microscope and polisherSpecified component material, heat-treatment lot, agreed hardness location/method and representative structure report.The publication does not identify a grade or heat-treatment acceptance for every catalogue family.
Residual-magnetism meter and bearing life testerAgreed residual-magnetism limit/method and life-trial load, speed, lubricant, temperature, sample size and failure criterion.A test-machine listing is not a life guarantee under your installed duty.

These are Kejie’s own published equipment names, not a current calibration or factory audit. The page also labels an instrument 烟雾试验机; its actual method and applicability need confirmation rather than silently treating that wording as a salt-spray standard. Obtain the offered part’s report and identify any outsourced testing. Original inspection page [5]

03

A failed sample needs a traceable investigation, not an unsupported cause.

Kejie’s fault-analysis page lists material analysis, hydrogen/oxygen/nitrogen chemical analysis, scanning-electron analysis, hardness/metallography, inclusion analysis, grease composition, dimensions, noise/vibration, visual review, fishbone analysis and 8D-report analysis. This is an advertised analysis route; the page does not establish that every listed laboratory instrument is operated in-house or that a report is automatically included in an order. Published analysis items [6]

  1. Preserve the evidence: keep the failed part, comparison sample and lot markings; record operating time, mounted loads/speed, temperatures, lubrication, installation and the observed symptom. Retain grease/debris and photographs before destructive examination where practical.
  2. Agree the investigation: identify the proposed checks, testing organisation, destructive permission and schedule. For a coated part, include contact wear, dimensional change and bond/interface observations alongside internal bearing evidence.
  3. Close the issue with records: request observations, measured results, causal evidence, containment and corrective actions, then agree a verification trial and drawing/process change approval. An 8D heading alone does not prove root cause or recurrence prevention.

The reviewed support material includes mounting, contamination, fit and noise topics, but does not publish a buyer-specific warranty response time or establish the cause of your failure. Agree the responsible technical contact and return/sample procedure in the quotation. Support publication [7]

04

Match the offered plant, documents and contracting company.

The official contact page names Ningbo Kejie Bearing Co., Ltd. (宁波珂杰轴承有限公司), building 29, Wanyang Zhongchuang City, 288 Xinxin Road, Yuyao, and [email protected]. It displays 13705849068 as a contact route, while site footer/English contact elements also show 135-7570-5584; confirm the designated order and technical contact when requesting a quotation. Official contact publication [8] English contact elements [4]

The honour page says the company passed ISO9001 in 2010. The linked certificate images could not be read during this review, so no current certificate number, issuer, scope or active status is asserted. Obtain the current original and verify legal entity, manufacturing address, covered process and issuer status. The production-flow image was also inaccessible; request the offered build’s actual process route rather than relying on an assumed flow. Honour page [9] Production-flow publication [10]

A government-hosted environmental report for a neighbouring communication-server-enclosure project names Kejie as the western neighbour in its surrounding-site description (printed page 29). This provides limited geographic/entity context; it is not Kejie’s own environmental approval, and its workforce, production and building figures belong to the reporting project. Original neighbouring-project report [11]

The official website presented a certificate-domain error in the browser on this review date; public HTTP text was readable. Ask for controlled drawings and current documents through the confirmed contact route. Website accessibility does not determine factory capability or order acceptance.

YOUR NEXT STEP

Prepare a Kejie interface and evidence enquiry

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

1 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationKejie · company introduction ↗

    Conventional/custom range and Φ3–Φ50 wording; no bore specification or available capacity inferred.

  2. Manufacturer categoryKejie · coated product category ↗

    Actual category reviewed; no numerical coating material/profile/BOM published in the obtained text.

  3. Manufacturer categoryKejie · outer-sphere category ↗

    Product route, not evidence of a supplied housing/locking form or assembly rating.

  4. Manufacturer English publicationKejie · English homepage ↗

    Coating/outer-sphere terminology and contact elements; public HTTP text read, browser certificate-domain error.

  5. Manufacturer equipment listKejie · inspection equipment ↗

    Actual named inspection equipment; capability, calibration and offered-part acceptance unverified.

  6. Manufacturer technical-service publicationKejie · fault-analysis route ↗

    Listed analytical/8D methods; no assumption all laboratory work is in-house or included.

  7. Manufacturer support contentKejie · support publication ↗

    General support topics; no buyer-specific diagnosis, warranty or response SLA established.

  8. Manufacturer contact publicationKejie · contacts ↗

    Legal name, building29/Xinxin288 and contact routes; authorised order contact requires confirmation.

  9. Manufacturer historical statement, images inaccessibleKejie · honour publication ↗

    2010 ISO9001 statement only; no current certificate identity, scope or status confirmed.

  10. Manufacturer image route, inaccessibleKejie · production-flow publication ↗

    Linked flow image not read; no process steps described as verified.

  11. Primary geographic contextGovernment-hosted neighbouring project environmental report ↗

    Original82-page PDF, printedp29 exact Kejie neighbour name; all project quantities belong to the neighbour, not Kejie.

Report a source correction → · Return to inquiry checklist ↑

NBKJ-B published product scope reviewed

The manufacturer website describes small deep groove and coated bearing designs.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.