PLB
PLB / Lingfan: miniature, automotive and custom bearings, with published closure-width examples and a practical route to material, geometry and application testing.
Use the catalogue to define the part, and the inspection plan to qualify it.
Lingfan’s homepage presents PLB and a stated overall production envelope of 3–40 mm bore and 10–100 mm outside diameter. Official portfolio [1] Its current catalogue also includes 602 with 2 mm bore and 7 mm outside diameter, so that homepage range should not be treated as a complete current boundary. 60-series table [2] Start from the specific offered drawing and available construction.
603 open and 603 ZZ/2RS do not share the published width.
The 60-series table labels its dimensions in mm and separately lists W(OPEN) and W(ZZ/2RS). [2] These examples show why the closure belongs in the purchasing specification.
| PLB table reference | Bore × outside diameter | Open width | ZZ/2RS width |
|---|---|---|---|
| 602 | 2 × 7 mm | 2.8 mm | 3.5 mm |
| 603 | 3 × 9 mm | 3 mm | 5 mm |
| 608 | 8 × 22 mm | 7 mm | 7 mm |
Confirm the exact drawing revision, shaft/housing fits, axial retaining space and complete suffix. Equal widths on the 608 row do not establish identical seal drag, lubrication or exposure behaviour between closures. Request material, cage, lubricant/fill, clearance and relevant torque/noise acceptance for the proposed build.
PLB also has a separately labelled wide/nonstandard-series route, including 62000 and 62200 references. [3] Ask which envelope, closure and units apply to the actual part; do not substitute a standard-series drawing solely because the designation looks similar.
The PLB column and “Ref. No.” column have different jobs.
The alternator table places B8-74D beside NPB8-74D-2RS and lists an 8 × 22 × 11 mm envelope. It also maps 6000TT to EC6000-2RS at 10 × 26 × 8 mm, and separately lists 62000-2RS at 10 × 26 × 10 mm. Alternator table [4] Even a common bore and outside diameter leave a different width and potentially different construction to check.
Replacing an existing alternator bearing
Provide the alternator manufacturer/part number, original complete bearing markings and controlled seat/retention drawing. Ask PLB to state its delivered designation and explain the reference mapping, including closure, clearance, lubricant and internal construction. The catalogue cross-reference is a manufacturer inquiry aid, not independent vehicle/alternator fitment approval.
Match PLB’s named instruments to the question you need answered.
The manufacturer’s testing-centre page names SPECTROCHECK spectroscopy, NITON handheld steel analysis, Mahr roundness/roughness-contour instruments, length measurement and salt-spray/life equipment. It describes material, metallurgy, hardness, dimensional/rotation precision and clearance checks, plus customer-requested life, salt-spray and waterproof tests. Testing centre [5] The instrument gallery separately names torque measurement. Inspection instruments [6] These are useful capability statements for requesting evidence, rather than measured results for an offered part.
| Your purchasing question | Supplier evidence to request |
|---|---|
| Does this lot match the agreed material? | Traceable material/heat record and appropriate analysis method, sample identity and acceptance limits. Ask what the selected analysis establishes for each component. |
| Will the part meet the fit, runout or torque requirement? | Current drawing, measured dimensional/rotation/torque results, instrument identification, calibration and measurement conditions. |
| Will the approved build tolerate the intended exposure and duty? | Agreed salt-spray/water/life protocol, complete specimen build, loads/speed/temperature, duration and pass/fail criteria relevant to that application. |
The testing page discusses measurement-system analysis. [5] Ask for the relevant method repeatability and measurement evidence where it affects acceptance. No accredited third-party laboratory status, standardised test duration or universal waterproof/life guarantee is inferred from the equipment list.
Link incoming rings, assembly sorting and the approved lot.
The published production route starts inner/outer ring machining with incoming inspection of post-heat-treatment parts, then describes grinding, demagnetisation and cleaning. Assembly lists 100% pre-assembly inspection, raceway grading and matching, followed by further operations and packaging. Process route [7] Ask which incoming characteristics, grading rules, final checks and traceability apply to your bearing. “100% pre-assembly inspection” does not establish that every final performance characteristic is tested on every shipped unit.
For robot work, the official entry says Lingfan develops/manufactures robot bearings and invites custom inquiries, without a numerical public specification. Robot route [8] Submit the actual bearing position, interfaces, load/moment, motion cycle, accuracy/rigidity and environmental requirements; request a proposed drawing and qualification plan. No joint accuracy or robot-model fit is claimed here.
The rail catalogue includes the exact 2Q-KR23RSZ-00 reference and a product page showing a component photograph. Rail component entry [9] Its name/category does not establish an axlebox bearing or rail approval. Ask what component/function the designation covers, the installation drawing and applicable customer/project approval. Do not carry a general rail-sector claim over to an unqualified safety-critical application.
Confirm the present legal/site scope behind PLB and Hangzhou Bay wording.
The about page uses 慈溪灵帆轴承有限公司 with Hangzhou Bay Bearing wording and a 1992 origin statement; it refers to ISO 9001:2000 and ISO/TS 16949. [10] Current valid certificates/site scope were not independently established. Confirm the Chinese contracting name, manufacturing location and the certificate coverage of your supplied family rather than treating a historical name or standard version as current approval.
A government-hosted 2025 technology-based SME list records 慈溪灵帆轴承有限公司 as entry 535, number 2025330282A8000535. [11] The official contact route gives No. 1018 Kaifa Road, Zhouxiang, Cixi. [1] The dated record is identity context; the homepage’s scale/capacity statements are not independently audited current output. Obtain a current quantity-specific quotation and confirm who handles sample approval, production changes and nonconforming lots.
Prepare a PLB catalogue-to-qualification request.
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
124 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationPLB · portfolio and contacts ↗
Overall envelope statement, PLB positioning and Zhouxiang address; current capacity not independently audited.
- Manufacturer model tablePLB · 60-series miniature table ↗
Explicit mm and separate open/closed widths; full materials/clearance/variant duty need controlled drawings.
- Manufacturer catalogue routePLB · wide/nonstandard series ↗
Wide-series references and fields; complete units/build and actual availability require confirmation.
- Manufacturer reference tablePLB · alternator-bearing table ↗
PLB/ref-number mapping and mm envelopes; not independently validated vehicle/alternator fitment.
- Manufacturer capability publicationPLB · experimental and testing equipment ↗
Named instruments, described tests and measurement-system analysis; no offered-part results or accreditation established.
- Manufacturer equipment galleryPLB · inspection instruments ↗
Named measurement routes including torque; not measured capability/tolerance or current calibration audit.
- Manufacturer process publicationPLB · ring and assembly process ↗
Published incoming/grinding/grading/matching steps; final unit-test coverage and lot execution require records.
- Manufacturer custom-product statementPLB · robot-bearing custom route ↗
Custom inquiry invitation only; no numeric part/joint performance or robot fit approval inferred.
- Manufacturer product entryPLB · 2Q-KR23RSZ-00 rail component ↗
Exact designation and viewed component photograph; function, installation/approval not inferred from category.
- Manufacturer publicationPLB · company introduction ↗
Lingfan/Hangzhou Bay wording and origin/old standard statements; current legal/certificate scope requires confirmation.
- Dated government entity recordZhejiang · 2025 first-batch technology-based SME list ↗
Original PDF exact name, entry 535 and record number; not bearing or railway product qualification.
Report a source correction → · Return to inquiry checklist ↑
PLB published product scope reviewed
The manufacturer website describes motor, steering and custom precision bearings.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.