Runstar
Runstar / Zhangzhou Runshida focuses on miniature, stainless and flanged ball bearings, with dental and ceramic catalogue routes. Small suffix changes can alter width and shielding. Use the actual model drawing and confirm material, lubricant, clearance and application tests; family marketing does not establish medical approval or universal corrosion resistance.
Approve the suffix and flange envelope, not only the tiny bore.
Zhangzhou Runshida Bearing Manufacturing Co., Ltd. (漳州润时达轴承制造有限公司) describes miniature/small deep-groove and thrust bearings, including stainless, flanged and wide-inner-ring variants. Its catalogue offers concrete dimensional entries, but some fields differ within a page or between variants. Use those differences to prepare a controlled enquiry rather than order from the family name alone. Official manufacturing scope [1]
SF692 open and shielded/sealed variants do not have the same listed width.
| Actual catalogue variant | Listed bore × OD × width | Buyer implication |
|---|---|---|
| SF692, open | 2 × 6 × 2.3 mm | Confirm axial space and open-bearing lubricant/contamination requirements. |
| SF692ZZ | 2 × 6 × 3 mm | Do not carry over the open variant's 2.3 mm width. |
| SF692-2RS | 2 × 6 × 3 mm | Confirm seal type, friction, grease and speed under the intended duty. |
These are the actual official flange-catalogue rows. Obtain a revision-controlled drawing for the ordered suffix, including flange diameter/thickness, chamfers, seating face, shaft/housing fits and retention. The category offers 440/420 material descriptions; the exact SF692 detail instead specifies 440C rings/balls and 304 cage. Keep material with the chosen part, not as a blanket description of the catalogue. Actual flange table [2] SF692 detail [3]
The SF692 detail lists flange OD 7.5 mm and flange thickness 0.6 mm, but its top weight is 0.28 g while its detailed table says 0.35 g. Ask the supplier to resolve the mass and issue the current drawing/data sheet. Its interchange table is a supplier cross-reference, not independently validated drop-in equivalence. Actual detail and conflicting weight [3]
Same bore and OD can hide different width and shielding requirements.
The dental table lists SR144K1TLW open at 3.175 × 6.35 × 2.78 mm, and SR144K1TLN open at 3.175 × 6.35 × 2.38 mm. Other SR144 variants are separately labelled single-sided shields or integrated shields. Its visible torque fields are blank; do not supply a torque, speed or sterilisation limit by guessing from a similar bearing. Actual dental rows and empty fields [4]
Dental-device component enquiry
Give the handpiece/rotor interfaces and actual duty. Request suffix drawing, running/friction performance, lubricant, cage/seal materials and validation for the specified cleaning/sterilisation process where applicable. The bearing category does not establish approval of a medical device.
Ceramic component enquiry
The ceramic 6800 detail provides 10 × 19 × 5 mm, but the reviewed text does not define full-ceramic versus hybrid construction or ceramic grade. Ask for ring/ball/cage materials, lubrication and application limits before using it for insulation, temperature or corrosion duty. Actual 6800 detail [5]
For either route, retain the actual drawing and agreed test conditions with the sample. Approve running behaviour in the buyer's assembly; dimensions alone do not establish the same internal design or service life.
Convert precision and compliance claims into selected-part evidence.
The SF692 detail lists ABEC-1 with higher grades available, C0 clearance with alternatives, grease with oil available, and supplier load/temperature figures. The broad category offers other grades. Agree the exact tolerance standard/grade and inspection items, clearance, lubricant and quantity in the quotation. Higher precision, alternative clearance or oil supply are enquiries, not confirmed stock for every variant. Category options [2] Selected-detail options [3]
- Freeze configuration: designation/suffix, flange drawing, materials, tolerance, clearance, shield/seal and lubricant.
- Approve a traceable sample: check mounting envelope, dimensions and running/friction/noise criteria agreed for the device.
- Validate the environment: specify speed/load, temperature, media/cleaning and contamination; obtain results for the selected configuration.
- Control repeat lots: retain lot inspection, component/lubricant changes, packaging and storage conditions.
The website states ISO 9001, REACH and RoHS compliance. Request current certificate scope and selected-material/component declarations or reports against the buyer's requirements. Do not treat “PASSED” in a product table as an independently checked report for every configuration. Official general claims [1] Product-table labels [3]
Fujian's actual 2023 third-batch technology SME register lists Runshida at entry 786, registration 202335060300002943. This is a dated company record, not medical approval, current certification or a selected-bearing performance test. Government register, PDF page 21 [6]
Use the singular “bearing” email domain and confirm the current receiving site.
The official contact gives 0596-2926212, fax 0596-2926213 and [email protected] — the email domain is singular, while the website uses runstarbearings.com. Its factory address is Building 16, Zone 3, Liandong U Valley, 3 Longmei Road, Longwen District, Zhangzhou, postcode 363005. Confirm the responsible engineer and manufacturing/audit receiving route before visiting. Actual contact page [7]
Ask for samples and serial quantities separately, exact-part availability, selected-option lead time, minimum order/tooling where applicable, packing cleanliness/corrosion protection and delivery terms. The company offers non-standard development, but the enquiry must define design ownership, sample acceptance and any tooling charges before release. General specification counts do not establish order capacity. Supplier development scope [1]
Resolve inconsistent or missing catalogue fields in a signed technical offer. Keep the approved configuration, lot identification and device installation/operating record for later quality claims.
Prepare a Runstar miniature-bearing enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
224 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official actual homepageRunstar · official company and product scope ↗
Miniature/stainless/flange focus, non-standard enquiries and supplier compliance claims.
- Official actual model tableRunstar · metric flanged miniature catalogue ↗
SF692 open/ZZ/2RS width differences and category options.
- Official actual detailed tableRunstar · SF692 ↗
Flange dimensions/material/options and conflicting weight; cross-reference not independently validated.
- Official actual model tableRunstar · dental-bearing catalogue ↗
SR144 suffix widths and shields, blank torque fields; no device approval inferred.
- Official actual detailRunstar · ceramic6800 ↗
10×19×5mm; reviewed text does not define ceramic construction or application limits.
- Government actual PDFFujian · 2023 third-batch technology SME register ↗
Page21 row786 registration202335060300002943; dated record not bearing qualification.
- Official actual dedicated contactRunstar · contact ↗
Singular email domain, phone/fax and LongmeiRoad factory address.
Report a source correction → · Return to inquiry checklist ↑
Runstar published product scope reviewed
The manufacturer website describes miniature ball and thrust bearings.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.