BearingIndex
THE BEARINGINDEX DIRECTORY

6201 — 12 × 32 × 10 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 10 mmD = 32 mmd = 12 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

6201

6201 is a deep groove ball designation documented on BearingIndex from 9 manufacturer publications. The published boundary dimensions are 12 × 32 × 10 mm. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
12 mm
Outside D
32 mm
Width B
10 mm

Compare the 9 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Reference mass (kg)Source recorded
Sihai
6201
————————2026-09-24 source ↗Request
CZ
6201
————————2026-09-24 source ↗Request
Runstar
6201
———————0.0372026-09-24 source ↗Request
Yuyao Global
6201
————————2026-09-24 source ↗Request
RCL
6201
6.8083.0512200028000———0.0372026-09-24 source ↗Request
INYOUNG
6201
6.83.052200028000———0.0372026-09-24 source ↗Request
Yuyao Xinfeng
6201
6.83.05——0.675.952—2026-09-24 source ↗Request
HCH
6201
————————2026-09-22 source ↗Request
ZYS
6201
————————2026-09-22 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 6.8 – 6.808 kN across 3 sources3
Static load ratingRanges 3.05 – 3.051 kN across 3 sources3
Limiting speed — greaseAll 2 sources publish 22000 rpm2
Limiting speed — oilAll 2 sources publish 28000 rpm2
Reference massAll 3 sources publish 0.037 kg3

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 210 mm
Mean diameter dm(D + d) / 222 mm
C / C₀ load ratio (3 sources)dynamic ÷ static load ratingRCL 2.23 · INYOUNG 2.23 · Yuyao Xinfeng 2.23

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 6201.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 6201

HCH

Zhejiang

Deep groove ball and tapered roller bearings

HCH publishes metric and inch ball bearings, tapered roller bearings and steel balls. Review the product route, production documents and export-entity evidence before sourcing.

23 designations documented here · source recorded 2026-10-08

Ask HCH about 6201

INYOUNG

Taizhou, Zhejiang, China

Ball and roller bearings from Wenling

INYOUNG publishes ball and roller bearing families from Wenling. Its deep-groove tables show why bore size alone is insufficient for replacement, while its material pages distinguish bearing-steel and stainless options. Obtain the current model drawing and confirm the offered material, closure and lubrication; online access limitations and catalogue inconsistencies remain unresolved.

Published ranges: Deep groove ball bearings · Cylindrical and tapered roller bearings · Spherical roller bearings · Angular contact bearings

93 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask INYOUNG about 6201

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 6201

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about 6201

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 6201

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 6201

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 6201

ZYS

Precision and special bearings

ZYS publishes precision bearings, screw-support components and complete spindle units, alongside inspection and analysis services. Decide which product or laboratory deliverable is required, then agree its drawing, duty and acceptance records. Confirm the responsible supply or testing entity and the scope of any claimed standard or laboratory service.

87 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask ZYS about 6201

Applications the publishing works state.

ApplicationStated by
Air compressorsINYOUNG
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesRCL, Yuyao Xinfeng
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Encoders and motorsRCL
Fishing tackleRunstar
Garden toolsCZ
GeneratorsINYOUNG
Household appliancesSihai, Yuyao Global
Medical equipmentRunstar, Yuyao Global
MotorcyclesINYOUNG
Office equipmentSihai
Power toolsCZ, Sihai
Precision instrumentsRunstar
RoboticsRCL
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Other designations with the same 12x32x10 mm envelope.

DesignationBearing familyWorks
6201-2RSDeep groove ball1
6201-2RZDeep groove ball1
6201EDeep groove ball1
6201T1XDeep groove ball1
6201TBDeep groove ball1
6201ZZ/2RSDeep groove ball1
760201-TNAngular contact1
H7201-AC-TA-HQ1-P4Angular contact1
H7201-AC-TA-P4Angular contact1
H7201-C-TA-HQ1-P4Angular contact1
H7201-C-TA-P4Angular contact1
S6201ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
6200—Deep groove ball10
6200-2RS10 × 28 × 8Deep groove ball1
6200-2RZ10 × 30 × 9Deep groove ball1
6200E10 × 30 × 9Deep groove ball1
6200T1X10 × 30 × 9Deep groove ball1
6200TB10 × 30 × 9Deep groove ball1
6200ZZ—Deep groove ball2
6200ZZ/2RS10 × 30 × 9Deep groove ball1
6201-2RS12 × 32 × 10Deep groove ball1
6201-2RZ12 × 32 × 10Deep groove ball1
6201E12 × 32 × 10Deep groove ball1
6201T1X12 × 32 × 10Deep groove ball1
6201TB12 × 32 × 10Deep groove ball1
6201ZZ—Deep groove ball2
6201ZZ/2RS12 × 32 × 10Deep groove ball1
620215 × 35 × 11Deep groove ball8
6202-2RZ15 × 35 × 11Deep groove ball1
6202E15 × 35 × 11Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 6201.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. Runstar · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Yuyao Global · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. RCL · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. INYOUNG · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  7. Yuyao Xinfeng · 6201 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  8. HCH · 6201 source ↗

    Directory record dated 2026-09-22. Confirm the current complete designation and controlled drawing with this manufacturer.

  9. ZYS · 6201 source ↗

    Directory record dated 2026-09-22. Confirm the current complete designation and controlled drawing with this manufacturer.