BearingIndex
THE BEARINGINDEX DIRECTORY

6200

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

6200 has conflicting recorded outer diameters and widths. HCH, CZ, SFH and RCL explicitly label their 10 × 30 × 9 dimensions in millimetres; five examined sources do not state boundary-dimension units, and INYOUNG’s original entry is currently under maintenance. Use the source-by-source review below before ordering.

Deep groove ball

6200

6200 is a deep groove ball designation documented on BearingIndex from 10 manufacturer publications. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Compare the 10 publications

Manufacturers publish different values for this designation.

D: 30 / 28 (see source units) · B: 9 / 8 / 7 (see source units). Confirm the dimension against the specific manufacturer drawing before specifying.

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Which 6200 drawing matches the part you are replacing?

A 6200 marking alone does not resolve this directory’s conflicting records. Runstar’s current list and detail both say 10 / 28 / 8 without a stated dimension unit. INYOUNG’s historical record says 10 / 30 / 7, but its original entry currently displays a maintenance notice. Four other manufacturers explicitly publish 10 × 30 × 9 mm. These are different evidence states, not three approved interchangeable envelopes.

Separate confirmed millimetres from numbers without units.

6200 publisherBore / outside diameter / width in the examined sourceWhat was verified on 9 October 2026
HCH [1]10 / 30 / 9 mmIts dimension table has paired mm and inch columns. The mm row is explicitly labelled.
CZ [2]10 / 30 / 9 mmThe original 62-series image states mm under d, D and B.
SFH [3]10 / 30 / 9 mmPDF page 15, printed SFH25: open B and closed B both read 9 mm.
RCL [4]10 / 30 / 9 mmThe current table explicitly states mm for all three boundary dimensions.
Runstar [5, 6]10 / 28 / 8; unit unstatedBoth the plain 6200 list row and its linked detail repeat these values.
Sihai [7]10 / 30 / 9; unit unstatedThe original table image labels d, D and B, but does not label their unit.
Yuyao Global [8]10 / 30 / 9; unit unstatedPDF page 6, printed 9: the boundary columns do not state mm.
Yuyao Xinfeng [9]10 / 30 / 9; unit unstatedThe current English table labels Bore, O.D. and Width without their unit.
ZYS [10]10 / 30 / 9; unit unstatedThe current Dimension heading and d/D/B columns do not state a boundary unit.
INYOUNG [11]Historical 10 / 30 / 7; current verification unavailableThe original entry displays a maintenance notice. Its historical width 7 is retained as an unresolved record.

The four explicitly labelled rows support those manufacturers’ nominal 10 × 30 × 9 mm entries. They do not supply the missing unit for Runstar or authorize changing its published 28 and 8. Sihai and Global label ball size in mm; that is a different field and does not label the boundary dimensions.

Ask Runstar about its repeated 28 / 8 entry; ask INYOUNG to reissue its unavailable 7-width evidence.

Runstar’s plain 6200 list row [5] links to the 6200 detail [6]. Both publish bore 10, outside diameter 28 and width 8; the detail also identifies weight as 32 g. This is a repeated publisher entry, rather than a value found only in the site’s historical import. Neither examined page states the dimension unit. The page title and product photo do not resolve its offered material, closure or why these dimensions differ.

If your assembly drawing requires 10 × 30 × 9 mm, send Runstar the exact list/detail links and request its offered 6200 drawing with units, outside diameter and width explicitly confirmed. Ask whether that drawing supersedes the web entry or describes the same offered product. Until it answers, keep the 28 / 8 record separate from the four labelled 30 / 9 mm entries; do not treat their numerical difference as a manufacturing tolerance.

INYOUNG’s original page [11] is currently under maintenance. For an INYOUNG offer, attach the directory’s historical 10 / 30 / 7 record and request the current 6200 drawing plus the document that establishes the width. The current access failure does not validate 7, prove 9, or explain the discrepancy. A supplier drawing and the original machine requirement must resolve that particular order.

A 30,000 speed entry does not have the same heading in every 6200 source.

Exact 6200 rowFirst speed columnSecond speed column
CZ [2]Grease: 25,000 rpmOil: 30,000 rpm
RCL [4]Grease: 24,000 r/minOil: 30,000 r/min
Sihai [7]Grease: 19,000 r/minOil: 26,000 r/min
Yuyao Global [8]Grease: 19,000 r/minOil: 26,000 r/min
SFH [3]油脂 / Grease: 24 × 1,000 rpm = 24,000 rpm开式 / Open: 30 × 1,000 rpm = 30,000 rpm

For a CZ or RCL quote citing 30,000 as a grease figure, the examined 6200 row places that number under oil. For an SFH quote, 30,000 belongs to the Open column; the source does not label that column oil. Return the exact row to the quoting manufacturer and ask which offered construction and document support its claimed condition. These rows do not establish one universal maximum speed for every 6200 offer.

SFH’s row separately records equal open and closed widths of 9 mm. Equal width does not erase its distinct speed-column headings. ZYS’s 6200 row lists ZZ, 2RZ, 2RS, N and NR options alongside the basic designation; those options are not a declaration that the quotation includes every listed feature. Keep the full offered marking attached to the applicable manufacturer document.

What each manufacturer published.

ManufacturerBore d — see source noteOutside D — see source noteWidth B — see source noteSource recorded
Sihai
6200
10
Boundary unit not stated in examined source
30
Boundary unit not stated in examined source
9
Boundary unit not stated in examined source
2026-09-24 source ↗Request
CZ
6200
10
mm explicitly stated
30
mm explicitly stated
9
mm explicitly stated
2026-09-24 source ↗Request
SFH
6200
10
mm explicitly stated
30
mm explicitly stated
9
9 mm for both open and closed columns
2026-09-24 source ↗Request
Runstar
6200
10
Unit not stated; current list and detail read
28
28 as published; unit not stated
8
8 as published; unit not stated
2026-09-24 source ↗Request
Yuyao Global
6200
10
Boundary unit not stated in examined catalogue
30
Boundary unit not stated in examined catalogue
9
Boundary unit not stated in examined catalogue
2026-09-24 source ↗Request
RCL
6200
10
mm explicitly stated
30
mm explicitly stated
9
mm explicitly stated
2026-09-24 source ↗Request
INYOUNG
6200
10
Historical value; current entry under maintenance
30
Historical value; current entry under maintenance
7
Historical 7; not verified in current source
2026-09-24 source ↗Request
Yuyao Xinfeng
6200
10
Boundary unit not stated
30
Boundary unit not stated
9
Boundary unit not stated
2026-09-24 source ↗Request
HCH
6200
10
mm explicitly stated
30
mm explicitly stated
9
mm explicitly stated
2026-09-22 source ↗Request
ZYS
6200
10
Boundary unit not stated in examined table
30
Boundary unit not stated in examined table
9
Boundary unit not stated in examined table
2026-09-22 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.

Compare the recorded figures.

PropertyFindingSources
Bore d — see source noteAll 4 sources publish 104
Outside D — see source noteAll 4 sources publish 304
Width B — see source noteAll 4 sources publish 94

Where the figures differ, use the drawing from the manufacturer you buy from.

The works that publish 6200.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 6200

HCH

Zhejiang

Deep groove ball and tapered roller bearings

HCH publishes metric and inch ball bearings, tapered roller bearings and steel balls. Review the product route, production documents and export-entity evidence before sourcing.

23 designations documented here · source recorded 2026-10-08

Ask HCH about 6200

INYOUNG

Taizhou, Zhejiang, China

Ball and roller bearings from Wenling

INYOUNG publishes ball and roller bearing families from Wenling. Its deep-groove tables show why bore size alone is insufficient for replacement, while its material pages distinguish bearing-steel and stainless options. Obtain the current model drawing and confirm the offered material, closure and lubrication; online access limitations and catalogue inconsistencies remain unresolved.

Published ranges: Deep groove ball bearings · Cylindrical and tapered roller bearings · Spherical roller bearings · Angular contact bearings

93 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask INYOUNG about 6200

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 6200

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about 6200

SFH

Shanghai, China

Miniature and thin-section ball bearings

SFH publishes miniature, flanged, thin-section and nonstandard bearing designs, with Wuxi production and Shanghai technical or inspection functions described on its company page. Specify the complete material, cage, closure and lubricant configuration, and confirm the current production site and certificate scope. Ceramic balls alone do not establish a nonmagnetic bearing.

Published ranges: Metric and inch miniature deep groove bearings · Flanged miniature bearings · Thin-section ball bearings · Double-row angular contact and thrust bearings

51 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SFH about 6200

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 6200

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 6200

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 6200

ZYS

Precision and special bearings

ZYS publishes precision bearings, screw-support components and complete spindle units, alongside inspection and analysis services. Decide which product or laboratory deliverable is required, then agree its drawing, duty and acceptance records. Confirm the responsible supply or testing entity and the scope of any claimed standard or laboratory service.

87 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask ZYS about 6200

Applications the publishing works state.

ApplicationStated by
Air compressorsINYOUNG
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesRCL, Yuyao Xinfeng
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Encoders and motorsRCL
Fishing tackleRunstar
Garden toolsCZ
GeneratorsINYOUNG
Household appliancesSihai, Yuyao Global
Medical equipmentRunstar, Yuyao Global
MotorcyclesINYOUNG
Office equipmentSihai
Power toolsCZ, Sihai
Precision instrumentsRunstar
Precision machinerySFH
Precision motorsSFH
RoboticsRCL
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Request a quote for 6200.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. SFH · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Runstar · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. Yuyao Global · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. RCL · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  7. INYOUNG · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  8. Yuyao Xinfeng · 6200 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  9. HCH · 6200 source ↗

    Directory record dated 2026-09-22. Confirm the current complete designation and controlled drawing with this manufacturer.

  10. ZYS · 6200 source ↗

    Directory record dated 2026-09-22. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. HCH · 62-series dimension table ↗

    Exact basic 6200 row and paired mm/inch boundary columns. Does not approve another manufacturer’s product.

  2. CZ · original metric 62-series table image ↗

    Exact 6200 row: 10/30/9 mm, grease/oil rpm headings. Image read with its headers.

  3. SFH · 2024 manufacturer catalogue ↗

    PDF15, printed SFH25 left: 6200, open/closed widths in mm, speed columns Grease and Open in ×1000 rpm. Second column is not labelled Oil.

  4. RCL · current 62-series table ↗

    Exact 6200 row: mm dimensions and grease/oil speeds, read against the original headings.

  5. Runstar · 6200 list row ↗

    Exact plain 6200 listing: d10/D28/B8 without a stated dimension unit; linked detail identified.

  6. Runstar · linked plain 6200 detail ↗

    The detail repeats 10/28/8 with no dimension unit and explicitly states weight32g. No explanation of the boundary conflict established.

  7. Sihai · original 6200-series image table ↗

    Exact 6200 row in cn_b__704.jpg: boundary units unstated; speed headings Grease/Oil and r/min explicit.

  8. Yuyao Global · manufacturer catalogue ↗

    PDF6/printed9 exact6200: boundary unit unstated, speed headings Grease/Oil and r/min explicit.

  9. Yuyao Xinfeng · current English 6200-series table ↗

    Exact6200: Bore10/O.D.30/Width9; no boundary unit in examined table.

  10. ZYS · current 6200-series table ↗

    Exact6200 row10/30/9; boundary unit unstated; row options ZZ/2RZ/2RS/N/NR do not identify an offered configuration.

  11. INYOUNG · original entry, currently under maintenance ↗

    On9October2026 this entry displays a maintenance notice. Historical directory width7 and other recorded values were not reverified here.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.