BearingIndex
THE BEARINGINDEX DIRECTORY

HCH

HCH / Huanchi: selecting ball or tapered bearings, qualifying production documents and identifying the sales entity.

HCH / HUANCHI BEARING GROUP

One bearing brief. Three distinct product routes.

HCH’s official product menu distinguishes deep-groove ball bearings, tapered roller bearings and steel balls. The ball-bearing navigation includes metric series, inch R-series and non-standard products; tapered bearings have their own metric and inch routes. Start with the correct route rather than sending a bare size to a general sales contact. Official product menu [1]

Prepare a sourcing inquiry
01

Choose the specification that matches what you are buying.

Metric and inch deep-groove bearings

The manufacturer lists 60, 62, 63, 68 and 69 series, 16000/6700, 62200/62300 and inch R-series. [1] Ask for the full designation, closure, clearance, grease and dimensional drawing together. Mixing an inch designation with a rounded millimetre dimension can obscure the intended replacement.

Tapered roller bearings

The menu separately identifies inch tapered bearings and metric 30200, 30300, 32000 and 32200 routes. [1] For a replacement, identify the cone and cup markings and the complete assembly requirement. Request the mounting dimensions and adjustment instructions for the offered assembly, rather than approving it on bore and outside diameter alone.

Steel balls

Steel balls appear as a separate product category. [1] A ball-component RFQ needs diameter, material, grade/tolerance requirements, finish, lot quantity and the required measurement records. Approval of a finished bearing does not automatically qualify a separately purchased ball lot.

These routes describe the public product organisation, not stock or a model-specific offer. BearingIndex’s recommended inputs above should be confirmed against the actual supplier drawing.

02

Use the quality menu to ask better qualification questions.

The official manufacturing-and-quality navigation names FMEA, process flow, control plans, measurement-system analysis, APQP and PPAP. [2] FMEA addresses potential failure modes; APQP is advance product quality planning; PPAP is a production-part approval process. The presence of those menu items is a reason to request the applicable documents, rather than proof that a particular order has been approved.

The detailed PPAP page identifies design records, measurement-system studies, dimensional and material results, initial process studies and a part submission warrant (PSW). It also discusses notification when tooling moves to another site or a material/service supplier changes. [5] Ask for the submission and change rules agreed for your programme; the public description is not an approval of the part you intend to buy.

  1. Agree the approval package

    State whether this is an industrial replacement or a controlled production programme. Ask what approval documentation the proposed product and manufacturing site can provide, and agree the required submission level with your quality team.

  2. Connect measurement to acceptance

    The website’s quality menu also covers gauge lists, repeatability/reproducibility and process-capability studies. Ask for the method, sample conditions and limits for your critical dimensions and running properties. A topic heading is not the underlying study.

  3. Control later changes

    Put the approved bearing variant, grease, site and drawing revision into the order record. Agree which process, material or location changes require notice and reapproval before serial delivery.

03

A quiet-running requirement needs a test definition.

HCH’s technical navigation separates internal-clearance selection, noise/vibration tests, precision classes, materials and limiting speed. [3] That is useful for an electric-motor or similar ball-bearing inquiry: “low noise” alone does not state the acceptance method.

Our suggested brief includes operating temperature, shaft/housing fit, running speed and load, required clearance, closure and lubricant. For acoustic or vibration acceptance, specify the measurement method, test conditions and limit with the supplier. Ask whether the report refers to loose bearings or the installed assembly.

The manufacturer’s clearance explanation distinguishes unloaded clearance from clearance under operating temperature and load, and discusses fit and temperature effects. [6] Ask HCH to explain why the proposed clearance is suitable for your motor; do not select C3 solely from a generic high-speed description.

Can a noise target replace the mechanical specification?

No. Keep the bearing designation and mounting conditions in the same brief as the noise/vibration requirement. Ask engineering to confirm the complete proposed variant before ordering evaluation samples.

04

The external trade record names an export company.

The China Chamber of Commerce for Import and Export of Machinery and Electronic Products (CCCME) carries a profile titled Ningbo Huanchi Imp. & Exp. Co., Ltd., with Huanchi group product information and a Cixi location. [4] Its company description remains a supplier profile, not a third-party factory inspection.

This matters when an inquiry starts with the HCH brand but the quotation comes from an export entity. Confirm the seller’s legal name, manufacturer, bank beneficiary and documentation responsibility through the normal supplier-onboarding process. Do not use old profile capacity, headcount or historical ISO references as current qualification evidence.

Which credentials have been independently confirmed here?

No current certificate number, expiry or site scope has been validated for your order. Request the relevant current certificate and verify its issuing body and coverage before adding an approved-supplier status.

YOUR NEXT STEP

Prepare an HCH product-and-approval brief.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

23 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationHCH · product navigation ↗

    Named product categories and series; not a live stock list.

  2. Manufacturer publicationHCH · manufacturing and quality ↗

    Published quality-document topics. No order-specific FMEA, control plan or PPAP reviewed.

  3. Manufacturer publicationHCH · technical support navigation ↗

    Named technical topics; no model-level noise, clearance or speed limits inferred.

  4. Chamber-hosted supplier profileCCCME · Ningbo Huanchi Imp. & Exp. profile ↗

    Export-company identity and location context. Supplier-submitted descriptive claims are not independently audited.

  5. Manufacturer technical publicationHCH · PPAP documentation and change notification ↗

    Describes approval-package items and change situations. A public procedure is not a purchaser-approved submission.

  6. Manufacturer technical publicationHCH · selection of internal clearance ↗

    Discusses operating clearance, fits and temperature. No clearance class prescribed for an unknown application.

Report a source correction → · Return to inquiry checklist ↑

No reviewed model or batch reports are available. Independent verification is not implied.

Useful before you source.

Read d, D and B before comparing a bearing →

What a bearing evidence label actually tells you →

Write a bearing inquiry a manufacturer can answer →