BearingIndex
THE BEARINGINDEX DIRECTORY

Wanshun

Wanshun / CNCJ: double-row angular-contact bearings and guide/straightening rollers, with a guide to series, track geometry and controlled inspection requirements.

WANSHUN · CNCJ · DOUBLE-ROW & GUIDE ROLLERS

Choose the bearing series first. Match the running interface next.

Ningbo Wanshun describes double-row angular-contact bearings as its speciality, alongside double-row deep-groove bearings and roller families. Company introduction [1] Its catalogue offers enough detail to narrow an inquiry, but some roller tables need clarification before they can become an order specification.

Prepare a sourcing inquiry
01

A 10 mm shaft does not settle the bearing envelope.

The 30/38-series page lists both 3000 and 3800 constructions with 10 mm bore, but different outside diameters and widths. 30/38 table [2] These are catalogue references for an engineering discussion, not an interchangeability statement.

Published designationBore × outside diameter × widthDecision before ordering
3000 2RS / 2Z10 × 26 × 12 mmCheck the housing and axial space against this envelope.
3800 2RS / ZZ10 × 19 × 7 mmConfirm the smaller envelope and the offered closure designation on the controlled part sheet.

Send radial/axial loads, speed, fits and the intended arrangement, then ask for the exact internal construction, clearance and acceptance drawing. Do not assume that 2Z and ZZ on this website are an identical supplied variant without confirmation. The table contains inconsistent static-load entries between some closure rows; no load value is corrected or used here to approve a design. Obtain a current signed/revision-controlled rating sheet for the proposed part. [2]

02

SG, V, W and A/AT lead to different interface questions.

SG / gothic-groove route

The SG page lists guide dimensions and SG15/SG15N variants; it also includes LFR references. [3] Send the actual rail profile/diameter and mounting arrangement. Ask the manufacturer to identify each drawing field, contact geometry and permissible load direction. The catalogue’s H difference between SG15 and SG15N is not labelled here as preload or groove depth: its function needs the drawing.

V-groove route

The V table includes LV20/7ZZ and LV201-14.2RS among other references. [4] Supply the mating track angle/profile, wheel spacing and mounting dimensions. Ask which groove geometry and seal construction apply to the exact designation; similar LV names do not establish a common track interface.

W guide-wheel route

The W table lists W0, W1/X and other variants, but its brand heading reads SUNTHAI while other catalogue pages use CNCJ. [5] Confirm the manufacturer/marking and controlled drawing of the offered wheel, plus its track geometry. The relationship between those brand labels has not been verified; an X suffix is not treated as a universal interchangeability promise.

A / AT straightening route

The A/AT page explicitly describes a double-row ball design and lists A507.2Z, A507.2RS and AT references. [6] Send the workpiece section/diameter/material, intended straightening arrangement and mounting drawing. Ask for defined groove fields and acceptable loads. A title or photograph does not establish compatibility with a particular straightening machine.

Some V/W/A-AT tables label very large-looking small-wheel weight values as kg; the units were not independently resolved. No weight is silently converted to grams, and blank fields are not zero. Require a legible model-specific drawing/data sheet before comparing mass, groove fields or ratings. [4] [5] [6]

03

Turn the general technical library into a part-specific agreement.

Suffix glossary is not an availability list

The designation page describes closure, clearance, material and precision-related codes, and includes TCB wording within a CNCJ library. [7] Request the manufacturer’s complete interpretation of the offered designation. The glossary does not demonstrate that every listed material, grade or suffix combination is available for every Wanshun model.

Grease choice needs a confirmed build

The grease library lists many named lubricants and a column headed NMB code. [8] Treat it as a reference library rather than current purchasing/stock evidence. Specify the actual lubricant, fill amount, speed, temperature and exposure for the proposed bearing; require current lubricant data and compatibility confirmation. A grease temperature range is not a whole-bearing operating limit.

04

Separate the bearing manufacturer from the export contract.

The contact page names Ningbo Wanshun Bearing Co., Ltd. at No. 16-1 Hengpeng Road, Henghe Industrial Zone, Cixi, and separately lists Wanshun Import and Export Corporation. [10] Confirm the legal Chinese name of the quoting/invoicing party, actual manufacturing site and acceptance/claim responsibility; a separate export contact is not proof that every contract is issued by the factory.

A Zhejiang government-hosted 2024 technology-based SME list records 宁波万顺轴承有限公司 as entry 380, number 2024330282A0003519. [11] This is dated entity context, not bearing qualification. The company introduction uses ISO 9001:2008 wording; a complete current valid certificate and scope were not independently verified. [1] Request current certificates and part-linked incoming/process/final inspection records. Published scale figures are not presented as verified current capacity.

YOUR NEXT STEP

Prepare a Wanshun double-row or roller inquiry.

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

1 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Manufacturer publicationWanshun · company introduction ↗

    Double-row focus, family list and historical ISO/scale statements; current certification/capacity not independently verified.

  2. Manufacturer product tableWanshun · 30/38 double-row angular-contact table ↗

    Published mm envelopes and closure labels; inconsistent ratings need a current controlled sheet.

  3. Manufacturer product tableWanshun · SG guide rollers ↗

    SG/LFR references and fields; exact mating geometry/field function requires drawings.

  4. Manufacturer product tableWanshun · V-groove rollers ↗

    LV references and varying groove fields; disputed weight units not corrected.

  5. Manufacturer-hosted catalogueWanshun · W guide wheels ↗

    W references and SUNTHAI heading; offered brand relationship and units unresolved.

  6. Manufacturer product tableWanshun · A/AT straightening rollers ↗

    Double-row ball description and A/AT names; machine fit, groove field meanings and weights not inferred.

  7. Manufacturer technical libraryWanshun · designation glossary ↗

    Generic code descriptions with TCB wording; not model-specific availability or specification approval.

  8. Manufacturer reference libraryWanshun · grease library ↗

    Named grease menu/NMB-code column; not current stock, selected BOM or whole-bearing temperature qualification.

  9. Manufacturer technical libraryWanshun · vibration and noise library ↗

    Named instruments and Z/V tables; not measured offered-part or installed-machine performance.

  10. Manufacturer contact publicationWanshun · factory and export contacts ↗

    Named entities/contact routes and Henghe address; current contract and site responsibility require confirmation.

  11. Historical government entity recordZhejiang · 2024 technology-based SME list ↗

    Entry 380, exact Chinese name and record number; not product certification or current factory audit.

Report a source correction → · Return to inquiry checklist ↑

Wanshun published product scope reviewed

The manufacturer website describes double-row angular contact ball bearings.

Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.

Company-level record; not a model test report · 2026-09-24 04:20:34

Source documentation retained for editorial review.