Wuling
Zhejiang Wuling publishes linear bearings, guide blocks, shafts, ball screws, track rollers and spherical plain bearings. Its GE.ES image includes separate inner/outer-ring widths, permissible tilt and sealed variants. Match the complete joint or motion assembly, then resolve the different addresses printed in product details and the current contact page.
Match the moving interface before choosing a catalogue family.
Zhejiang Wuling Bearing Manufacturing Co., Ltd. (浙江五灵轴承制造有限公司) describes manufacture and application service for linear bearings, stud-type track rollers, shafts, guides, sliding units, ball screws, rod ends and radial spherical plain bearings. These products solve different motion tasks: a guided axis, a rolling follower and an articulating joint need separate drawings and acceptance requirements. Company product and application scope [1]
A joint replacement needs more than its bore diameter.
The official GE.ES single-split radial spherical plain-bearing page includes an actual drawing and parameter image. It separates bore d, outside diameter D, inner-ring width B, outer-ring width C and tilt angle. The image lists GE20ES and GE20ES-2RS together with d 20 mm, D 35 mm, B 16 mm, C 12 mm and a 9° angle entry. These are catalogue data for candidate selection; confirm the selected suffix and operating limits on the supplied drawing. GE.ES drawing and table viewed in browser [2]
| Interface | What to compare | Why it matters |
|---|---|---|
| Shaft and housing | d, D, B, C, shoulders and retention | The same bore does not define the outer envelope or available shoulder contact. |
| Articulation | Required movement, adjacent-part clearance and permissible tilt | The installed linkage must clear its housing and seals throughout travel. |
| Maintenance | Sliding-pair material, seal suffix and lubrication path | A listed sealed variant does not establish maintenance-free operation. |
Provide radial/axial loads, oscillation angle and frequency, duty cycle, shock, temperature and contamination. Request the actual sliding-pair specification, lubrication interval, wear/clearance criteria and permissible duty. Do not turn the catalogue’s dynamic/static columns into an installed-life guarantee without its units, calculation basis and application review.
Wuling separately publishes POS external-thread lined rod ends. A threaded linkage end is a different assembly from a loose GE.ES bearing. Specify thread size, pitch, handedness, engagement, centre height, bore and clearance through the full articulation; request the actual lining and maintenance specification rather than inferring them from the family name. POS rod-end publication [3]
Keep guide, shaft and screw decisions on one controlled assembly drawing.
The HG guide-block detail and SFI single-nut ball-screw detail provide distinct catalogue routes. HG identifies a guide family; SFI identifies a screw/nut family. Neither title confirms the other components needed for a ready-to-install axis or interchange with another manufacturer. HG detail [4] SFI detail [5]
Guide and shaft package
Send rail/block or shaft/linear-bearing designations, assembly height, mounting-hole positions, shaft diameter and tolerances, support span, rail length and mounting datums. Define load directions and moments, number of blocks, travel, lubrication and environmental protection. Ask which supplied parts are matched and inspected together.
Screw and nut package
State diameter, lead, helix, nut style, active and total lengths, accuracy, backlash/preload requirement, end machining and fixed/support-end arrangement. Provide speed, acceleration, axial load and orientation. Require a drawing and explicit quotation for nut, support bearings, housing, coupling and any machining.
The company lists textile, printing, power tools, medical machinery and precision machine tools as applications. These names identify prospective use areas, not model-specific machine accuracy or medical-programme qualification. Specify what your machine actually needs and validate the installed motion under its loads. Published application description [1]
Use the screw-nut patent to ask a precise engineering question.
The actual publication CN113217592B, published 22 December 2023, lists Zhejiang Wuling as original assignee. Its technical description concerns a split screw nut using upper/lower covers, a fixing disc, collar and locking features to allow access to balls and lubrication. This is a specific disclosed construction, not proof that every SFI catalogue nut uses it or that a finished product is qualified. Patent publication, abstract and claims actually read [6]
If service access is relevant, ask whether the proposed product implements that construction, which drawing identifies it and what disassembly/reassembly procedure is permitted. Agree cleanliness, ball matching, backlash/preload and running-torque checks after maintenance. Do not assume that opening a conventional nut is an approved field procedure. The database’s legal-status label is not a current legal determination; obtain relevant rights confirmation separately where required.
- Approve the interface drawing. Freeze dimensions, suffixes, materials, motion range and mating-part requirements for the exact joint or axis.
- Agree the sample tests. For joints include clearance, articulation and wear under duty; for guided axes include running resistance, positioning/backlash and lubrication.
- Define serial evidence. Require lot identification, dimensional reports and agreed material/process records; set change approval for source, lining, seals, machining or matched components.
The company’s general statement about international standards does not identify an edition, test report or current certificate. Request the exact applicable standard and current entity/site scope when qualification requires one. Obtain a written sample and serial schedule for the ordered configuration.
Resolve the receiving address before sending samples or arranging an audit.
The dedicated contact page lists Mr Wu, +86-13695780858, [email protected] and 13 Ye’ao Road, first floor, Nanmingshan Subdistrict, Liandu, Lishui. The product details instead print 10 Wenli Second Road and 18657855663, while their footers repeat the dedicated-contact information. These are different published routes; the pages do not explain a relocation or division of responsibilities. Dedicated contact [7] Product-detail supplier block [4]
Use the dedicated route to confirm the current manufacturing/audit and sample-receiving locations, legal contracting/invoicing entity and engineering contact. Attach the controlled joint or axis drawing, duty and sample acceptance plan. Request the complete bill of materials, manufacturing/source responsibility, inspection documents, packing, delivery and warranty terms before committing an order.
Prepare a Wuling joint or linear-motion enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
52 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Official company textWuling · company introduction ↗
Product and application scope; general standards claims require order-specific evidence.
- Official text and actual image table viewedWuling · GE.ES single-split radial spherical plain bearings ↗
GE20ES and2RS, d/D/B/C and angle entries; catalogue selection rather than validated installed duty.
- Official product publicationWuling · POS external-thread lined rod ends ↗
Distinct threaded rod-end family; controlled lining/thread/duty details required.
- Official product publicationWuling · HG guide blocks ↗
Guide-family route and different supplier contact block; no automatic cross-brand interchange.
- Official product publicationWuling · SFI single-nut ball screws ↗
Screw/nut family, not a complete axis bill of materials.
- Patent publication reproduced by Google PatentsCN113217592B · adjustable screw nut ↗
Actual abstract/description/claims and2023publication, original assignee; no catalogue mapping or current rights conclusion.
- Official contact textWuling · dedicated contact ↗
MrWu13695780858/email/Yeao13 first-floor route; resolve differing product-detail information.
Report a source correction → · Return to inquiry checklist ↑
Wuling published product scope reviewed
The manufacturer website describes linear and spherical plain bearing systems.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:33
Source documentation retained for editorial review.