BearingIndex
THE BEARINGINDEX DIRECTORY

16010ZZ/2RS — 50 × 80 × 10 (unit unconfirmed)

HISTORICAL DIMENSION INTERPRETATIONUNIT UNCONFIRMED

The source does not state dimension units. Obtain the offered drawing before using these historical values.

Deep groove ball

16010ZZ/2RS

16010ZZ/2RS is a deep groove ball designation documented on BearingIndex from 1 manufacturer publication. The historical directory dimension interpretation is 50 × 80 × 10 (unit unconfirmed). The examined source does not state its dimension unit. The publishing works are in Zhejiang province, China. The historical record is retained; the individually reviewed guide identifies the unresolved source fields.

Bore d
50 unit unconfirmed
Outside D
80 unit unconfirmed
Width B
10 unit unconfirmed

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

What exactly are you ordering from SXA’s “16010ZZ/2RS” page?

The manufacturer places this page under “英制R系列” (inch R series), while the dimensional table shows 50, 80 and 10 without a unit. Its combined model label also leaves the actual closure unresolved. Get a dimensioned drawing and one complete order designation before accepting a replacement.

The category name cannot supply the missing unit.

SXA’s actual product page [1] shows d = 50 and D = 80, with open width B = 10 and shielded width B1 = 10. The examined table does not label these dimensions in mm or inches. Its breadcrumb and title place the item in the inch R-series category, but that navigation label is not a controlled dimensional specification.

The directory historically records 50/80/10 as millimetres. This guide does not present that interpretation as a freshly verified unit statement from SXA. Request a drawing with explicit units and ask the manufacturer to resolve the category/table ambiguity.

CZ’s separately published metric 16000 sheet [2] identifies its own 16010 row as 50/80/10 mm. That provides context for the same displayed numbers in a different manufacturer’s catalogue. It does not prove SXA’s unit or establish interchangeability.

Do not convert SXA’s three numbers from inches simply because of the breadcrumb, and do not use them to machine a seat until the offered drawing is resolved. Include the old bearing marking and actual assembly drawing when requesting that confirmation.

Make the closure a decided order field, rather than leaving the slash in the quote.

The exact title and model cell say 16010ZZ/2RS. The width and chamfer fields distinguish open and shielded constructions, but do not give a separate 2RS width in the examined table. The slash does not define a particular supplied assembly.

If requesting a ZZ item
Ask SXA to identify the offered shield construction and confirm its width, lubricant and complete suffix in the order drawing. Its displayed shield-width value alone does not define the rest of the supplied configuration.
If requesting a 2RS item
Request its own closure section, dimensioned width and applicable speed conditions. Do not assume that the shield-width field is a verified 2RS dimension or that a shield speed condition applies to its sealing arrangement.

Give the supplier the actual reason for selecting the closure: the assembly’s exposure, lubrication arrangement and rotational duty. The source provides no ingress-protection rating or tested friction result. If the supplier uses a different suffix convention, keep its written construction definition with the quotation.

The speed multiplier is stated; the load units are not.

SXA labels the speed section rpm and shows a “×1000 rpm” scale with grease 8.4 and oil 9.8. Those displayed values therefore read as 8400 and 9800 rpm. The table does not assign a separate speed to each construction named in the combined title. Ask which offered item and lubrication conditions the figures cover.

The basic dynamic and static load fields show 13200 and 11300 without a displayed unit in the examined table. Request the load units and the rating basis for the actual offered item. This page does not automatically label them newtons or insert them into a life calculation.

A usable order confirmation resolves four things together: one full closure designation, a dimensioned drawing with units, ratings with units and construction-specific operating conditions. Until then, the page offers a product lead rather than a fully specified replacement.

What each manufacturer published.

ManufacturerSource recorded
SXA
16010ZZ/2RS
2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

The works that publish 16010ZZ/2RS.

SXA

Ningbo, Zhejiang, China

Miniature and ultra-thin-wall ball bearings

SXA publishes steel and stainless deep-groove bearings, miniature MR and inch R series, and flanged versions. Its catalogue offers several closures and material options. Select the complete supplied form when comparing quotes.

Published ranges: Miniature deep groove ball bearings · Flanged miniature bearings · Stainless steel bearings · Ultra-thin-wall miniature bearings

296 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SXA about 16010ZZ/2RS

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Request a quote for 16010ZZ/2RS.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. SXA · 16010ZZ/2RS source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. SXA / Ningbo Xinshiji · exact 16010ZZ/2RS page ↗

    Current full product page and actual table read. Category says inch R series; dimension/load units unstated. rpm multiplier present; open/shield widths shown, separate 2RS width absent.

  2. CZ / Cixi Lisheng · official metric 16000 sheet ↗

    Original sheet viewed enlarged: separate metric 16010 row shows 50/80/10 mm. Context only; does not establish SXA units or interchange.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.