BearingIndex
THE BEARINGINDEX DIRECTORY

634 — 4 × 16 × 5 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 5 mmD = 16 mmd = 4 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

634

634 is a deep groove ball designation documented on BearingIndex from 3 manufacturer publications. The published boundary dimensions are 4 × 16 × 5 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
4 mm
Outside D
16 mm
Width B
5 mm

Compare the 3 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Source recorded
Sihai
634
—————2026-09-24 source ↗Request
Yuyao Global
634
—————2026-09-24 source ↗Request
Yuyao Xinfeng
634
1.880.680.363.1752026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 26 mm
Mean diameter dm(D + d) / 210 mm
C / C₀ load ratiodynamic ÷ static load ratingYuyao Xinfeng 2.76

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 634.

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 634

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 634

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 634

Applications the publishing works state.

ApplicationStated by
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesYuyao Xinfeng
Communications equipmentYuyao Global
Household appliancesSihai, Yuyao Global
Medical equipmentYuyao Global
Office equipmentSihai
Power toolsSihai

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 4x16x5 mm envelope.

DesignationBearing familyWorks
634 ZZDeep groove ball1
634ZZ/2RSDeep groove ball1
F634ZZ/2RSDeep groove ball1
S634ZZ/2RSDeep groove ball1
SF634ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
6300—Deep groove ball7
6300-2RS10 × 35 × 11Deep groove ball1
6300-2RZ10 × 35 × 11Deep groove ball1
6300E10 × 35 × 11Deep groove ball1
6300ZZ10 × 35 × 11Deep groove ball1
6300ZZ/2RS10 × 35 × 11Deep groove ball1
6301—Deep groove ball5
6301-2RZ12 × 37 × 12Deep groove ball1
6301E12 × 37 × 12Deep groove ball1
6301T1X12 × 37 × 12Deep groove ball1
6301ZZ/2RS12 × 37 × 12Deep groove ball1
6302—Deep groove ball5
6302-2RZ15 × 42 × 13Deep groove ball1
6302E15 × 42 × 13Deep groove ball1
6302T1X15 × 42 × 13Deep groove ball1
6302ZZ/2RS15 × 42 × 13Deep groove ball1
6303—Deep groove ball5
6303-2RZ17 × 47 × 14Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 634.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 634 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. Yuyao Global · 634 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. Yuyao Xinfeng · 634 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.