BearingIndex
THE BEARINGINDEX DIRECTORY

LM100UU-AJ — 100 × 150 × 175 mm

BOUNDARY DIMENSIONSUNIT / mm
L = 175 mmD = 150 mmd = 100 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Linear bearings

LM100UU-AJ

LM100UU-AJ is a linear bearings designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 100 × 150 × 175 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
100 mm
Outside D
150 mm
Length L
175 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerReference mass (kg)Source recorded
YTP
LM100UU-AJ
8.542026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 225 mm
Mean diameter dm(D + d) / 2125 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish LM100UU-AJ.

YTP

Ningbo, Zhejiang, China

Linear ball bearings and support units

YTP offers a linear-motion catalogue, cross-reference table and selection interface. The LM20UU/MX length difference and explicit reference-only MX sizes show why a replacement needs full interfaces and availability confirmation; qualify the shaft, alignment, load distribution and lubrication together, then reconcile calculation assumptions and applicable standard editions.

Published ranges: Standard and flanged linear ball bearings · Nickel-plated and steel-cage variants · Boxed linear-bearing units · KH drawn-cup linear bearings

287 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask YTP about LM100UU-AJ

Applications the publishing works state.

ApplicationStated by
Linear-motion systemsYTP

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
LM10—Linear bearings1
LM100—Linear bearings1
LM100UU—Linear bearings1
LM10L—Linear bearings1
LM10LUU—Linear bearings2
LM10M—Linear bearings1
LM10S—Linear bearings1
LM10UU—Linear bearings1
LM10UU-AJ—Linear bearings1
LM10UU-OP—Linear bearings1

Each envelope shown is that designation’s own published size.

Request a quote for LM100UU-AJ.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. YTP · LM100UU-AJ source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.