BearingIndex
THE BEARINGINDEX DIRECTORY

SR4AZZ/2RS — 6.35 × 19.05 × 5.558 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 5.558 mmD = 19.05 mmd = 6.35 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

SR4AZZ/2RS

SR4AZZ/2RS is a deep groove ball designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 6.35 × 19.05 × 5.558 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
6.35 mm
Outside D
19.05 mm
Width B
5.558 mm

Compare the 1 publication

What each manufacturer published.

ManufacturerSource recorded
SXA
SR4AZZ/2RS
2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 26.35 mm
Mean diameter dm(D + d) / 212.7 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish SR4AZZ/2RS.

SXA

Ningbo, Zhejiang, China

Miniature and ultra-thin-wall ball bearings

SXA publishes steel and stainless deep-groove bearings, miniature MR and inch R series, and flanged versions. Its catalogue offers several closures and material options. Select the complete supplied form when comparing quotes.

Published ranges: Miniature deep groove ball bearings · Flanged miniature bearings · Stainless steel bearings · Ultra-thin-wall miniature bearings

296 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SXA about SR4AZZ/2RS

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 6.35x19.05x5.558 mm envelope.

DesignationBearing familyWorks
R4AZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Request a quote for SR4AZZ/2RS.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. SXA · SR4AZZ/2RS source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.