Huashuo
Ningbo Huashuo: small deep-groove and contact-ball bearing enquiries, with expressly published widened-inner-ring, snap-ring and flanged product routes.
Choose the retention structure and closure before releasing the housing drawing.
Huashuo positions its bearing range around small deep-groove and contact-ball bearings, with applications including electric spindles, appliance motors and power tools. Its website gives separate entry points for widened inner rings, snap-ring retention and flanges, alongside references such as 6000-2RS and 6001ZZ. These entry points call for different interface drawings, not an interchangeable general bearing order. Company scope [1] Displayed product routes [2]
Use the drawing’s closure-specific flange fields.
The flange page includes a section drawing and explicit mm tables. In the drawing, the open form uses B, D1 and C1; the shielded/sealed forms use B1, D2 and C2. Here B/B1 are the respective bearing widths, D1/D2 the flange outside diameters and C1/C2 the flange widths. Original flange drawing and table [3]
| Actual catalogue row | Common d / D (mm) | Open B / D1 / C1 (mm) | Shielded/sealed B1 / D2 / C2 (mm) |
|---|---|---|---|
| MF105 / MF105ZZ | 5 / 10 | 3 / 11.2 / 0.6 | 4 / 11.6 / 0.8 |
| F684 / F684ZZ / F684-2RS | 4 / 9 | 2.5 / 10.3 / 0.6 | 4 / 10.3 / 1 |
The MF105 row shows “/” under the sealed designation, while F684 lists a -2RS form. A catalogue blank is not permission to invent a seal variant, and a listed variant does not establish stock. Confirm the offered drawing, recess diameter/depth, shoulder contact, ring retention and full axial stack before switching closure.
Keep a reference table separate from an approved operating limit.
The published F697 row shows a grease-speed entry of 3,600 rpm beside an oil entry of 43,000 rpm. Seek a controlled correction or confirmation with exact closure, lubricant and duty conditions; do not silently add a zero or apply another row’s limit. The website’s broader tables are a research starting point, not an installed-motor acceptance report. Published speed fields [3]
A widened inner ring and a snap ring require different missing dimensions.
Widened inner-ring enquiry
Huashuo has an explicitly titled widened-inner-ring page. Its description also contains general metric, inch and flange tables. The generic B1 field cannot be taken as a specified inner-ring extension simply because it appears under this title. Send a section drawing defining inner/outer ring widths, extension on each side, shaft retention and which face takes assembly or service load. Request the offered special designation and tolerances. Widened-inner-ring page [4]
Snap-ring retention enquiry
The separate snap-ring page likewise contains the broader tables without a complete offered groove/ring interface specification. Define groove diameter/width/location, snap-ring section and supplied-ring inclusion, housing shoulder/recess and retained load direction. Agree how the ring is installed and inspected; the page title alone does not establish an N/NR variant or an allowable retained load. Snap-ring page [5]
For either route, identify whether you are buying a complete bearing assembly or a special component, and approve a controlled offered drawing before tooling, sample approval or substitutions. Closure-dependent catalogue widths and a deliberately extended inner ring are different requirements.
Separate the basic bearing reference from the machine’s precision and heat requirements.
The 6000-2RS page contains a catalogue row with d = 10 mm, D = 26 mm and B/B1 = 8 mm, listing open, ZZ and -2RS designations. That dimension row does not specify the complete material, cage, clearance, lubricant or precision build for a quoted motor. 6000-2RS publication [6]
- Appliance or power-tool motor: provide the actual bearing position, load/speed and start-stop duty, shaft/housing fit, temperature and contamination. Agree starting/running torque and installed-motor noise acceptance with measurement conditions.
- Electric spindle or contact-bearing enquiry: request the complete offered contact-bearing reference and drawing, contact angle, single/pair arrangement and matching/preload instructions; specify runout/stiffness and thermal behaviour in the spindle. A general spindle application statement is not proof that a displayed 6000-2RS is a matched precision spindle set.
- Mounting change: recheck the complete recess, ring retention and axial load path whenever closure, flange or ring geometry changes; qualify the assembled machine rather than approving from bore/OD alone.
These are purchase-preparation questions derived from Huashuo’s actual range and application statements. No machine fitment, precision class, noise result or service-life guarantee is established here. Manufacturer’s application scope [1]
Attach the offered build to a current legal site and inspection record.
Huashuo states refined bearing steel, automated production and outgoing inspection. Its technical-strength page presents workshop/environment entries; obtain the process route and part-linked material/heat-treatment, dimension/runout and final inspection records, with calibration and lot traceability. General process wording and gallery entries do not establish a particular machine accuracy or audited production capacity. Manufacturing statements [1] Technical-strength publication [7]
The government-hosted Ningbo 2024 first-batch technology-based SME list includes the exact entity 宁波华硕轴承有限公司, entry 83, number 2024330211A0000083. This is dated company identity context, not a bearing certification or a government endorsement of the published performance claims. Original government record [8]
The official contact page gives Qinghe Road 168, Jiaochuan, Zhenhai, Ningbo, and [email protected]. The visible phone is 13777209998, while the site’s telephone link points to 13777209888. Confirm the authorised number before relying on a click-to-call route and match the quotation/manufacturing address to the actual legal entity. Ask for any required current certificate with issuer, site, scope and validity; a general statement of recognition is not a verified credential. Official contact publication [9]
Prepare Huashuo’s ring-and-retention drawing brief
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
1 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer publicationHuashuo · company introduction ↗
Bearing focus, application and manufacturing self-statements; broad corporate business list not every product’s manufacturing proof.
- Manufacturer product indexHuashuo · displayed product routes ↗
Separate special-ring/flange and model entries; no stock or current production slot inferred.
- Manufacturer drawing/tableHuashuo · flange section and tables ↗
Inline section and original table visually reviewed; closure field mapping and actual MF105/F684 dimensions; speed anomaly retained for clarification.
- Manufacturer special-product routeHuashuo · widened-inner-ring page ↗
Explicit title with broader repeated tables; actual special extension geometry/designation needs controlled drawing.
- Manufacturer special-product routeHuashuo · snap-ring page ↗
Explicit title; complete groove/ring interface and allowable retention load not obtained from displayed tables.
- Manufacturer model/table publicationHuashuo · 6000-2RS page ↗
10/26/B-B1 8 mm row; no offered BOM, precision set or installed-motor result established.
- Manufacturer facility publicationHuashuo · technical-strength/workshop entries ↗
Workshop/environment entries; not an equipment-capability or calibration audit.
- Government enterprise recordNingbo · 2024 first-batch technology-based SME list ↗
Original PDF downloaded again; entry 83 exact legal entity and 2024330211A0000083, historical identity only.
- Manufacturer contactsHuashuo · contacts ↗
Qinghe Road 168 and email; displayed and telephone-link numbers differ, authorised number needs confirmation.
Report a source correction → · Return to inquiry checklist ↑
Huashuo published product scope reviewed
The manufacturer website describes small deep groove and angular contact bearings.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.