BearingIndex
THE BEARINGINDEX DIRECTORY

693

BOUNDARY DIMENSIONSUNIT / mm
W = ? mmD = 8 mmd = 3 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

693

693 is a deep groove ball designation documented on BearingIndex from 5 manufacturer publications. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Compare the 5 publications

Manufacturers publish different values for this designation.

B: 3 / 4 mm. Confirm the dimension against the specific manufacturer drawing before specifying.

What each manufacturer published.

ManufacturerBore (mm)Outside diameter (mm)Width (mm)Dynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Reference mass (kg)Source recorded
CZ
693
383——————2026-09-24 source ↗Request
RCL
693
3840.550.186000067000—0.00082026-09-24 source ↗Request
GOOT
693
383————0.15—2026-09-24 source ↗Request
Yifeng
693
383——————2026-09-24 source ↗Request
Huashuo
693
3830.560.1796000067000——2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings.

Compare the recorded figures.

PropertyFindingSources
BoreAll 5 sources publish 3 mm5
Outside diameterAll 5 sources publish 8 mm5
WidthRanges 3 – 4 mm across 5 sources5
Dynamic load ratingRanges 0.55 – 0.56 kN across 2 sources2
Static load ratingRanges 0.179 – 0.18 kN across 2 sources2
Limiting speed — greaseAll 2 sources publish 60000 rpm2
Limiting speed — oilAll 2 sources publish 67000 rpm2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 22.5 mm
Mean diameter dm(D + d) / 25.5 mm
C / C₀ load ratio (2 sources)dynamic ÷ static load ratingRCL 3.06 · Huashuo 3.13

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 693.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 693

GOOT

Ningbo, Zhejiang, China

Deep groove ball bearings and miniature variants

GOOT publishes miniature/small deep-groove and angular-contact bearings, including spindle and motor contexts. The metric table distinguishes open, ZZ and -2RS designations; confirm the current controlled specification and qualification instead of using older website content as a present delivery promise.

Published ranges: Deep groove ball bearings · Stainless steel and flanged variants · Angular contact ball bearings

6 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask GOOT about 693

Huashuo

Ningbo, Zhejiang, China

Small deep groove and angular contact bearings

Huashuo’s flange drawing separates open B/D1/C1 from shielded or sealed B1/D2/C2 dimensions. Resolve that closure-dependent envelope before approving the recess and axial stack. Its widened-inner-ring and snap-ring pages repeat broader catalogue tables, so obtain the actual special ring/groove drawing and offered designation rather than interpreting generic B1 as an inner-ring extension.

Published ranges: Miniature and small deep groove ball bearings · Angular contact ball bearings · Flanged and extended-inner-ring variants

1 designation documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Huashuo about 693

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 693

Yifeng

Ningbo, Zhejiang, China

Miniature and nonstandard ball bearings

Yifeng’s MR104 page separates 3 mm open from 4 mm closed width, while R2A shows paired mm/inch dimensions. Reconcile the MR104 product and technical-table load/chamfer entries with a controlled drawing; 923 and 923/3.175 need an actual specification. Manufacturer-displayed ISO/IATF documents name Huancheng East Road 387, whereas current contacts name Huancheng West Road 588, so verify the offered manufacturing site and certificate coverage before transferring approval.

Published ranges: Miniature deep groove ball bearings · 604–609 and 6000–6005 series · Inch and nonstandard bearings

3 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yifeng about 693

Applications the publishing works state.

ApplicationStated by
Air-conditioning motorsHuashuo
BicyclesRCL
Brushless motorsCZ
Circular loomsRCL
Dental equipmentGOOT
DronesCZ
Encoders and motorsRCL
Fitness equipmentHuashuo
Garden toolsCZ
Office equipmentGOOT
Power toolsCZ, GOOT, Huashuo
Precision motorsGOOT
RoboticsRCL
Vacuum cleanersHuashuo

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
690010 × 22 × 6Deep groove ball7
6900zz10 × 22 × 6Deep groove ball1
6900ZZ/2RS10 × 22 × 6Deep groove ball1
690112 × 24 × 6Deep groove ball6
6901zz12 × 24 × 6Deep groove ball1
6901ZZ/2RS12 × 24 × 6Deep groove ball1
690215 × 28 × 7Deep groove ball5
6902ZZ/2RS15 × 28 × 7Deep groove ball1
690317 × 30 × 7Deep groove ball5
6903ZZ/2RS17 × 30 × 7Deep groove ball1
690420 × 37 × 9Deep groove ball5
6904ZZ/2RS20 × 37 × 9Deep groove ball1
690525 × 42 × 9Deep groove ball5
6905ZZ/2RS25 × 42 × 9Deep groove ball1
690630 × 47 × 9Deep groove ball5
6906ZZ/2RS30 × 47 × 9Deep groove ball1
690735 × 55 × 10Deep groove ball3
6907ZZ/2RS35 × 55 × 10Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 693.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. CZ · 693 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. RCL · 693 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. GOOT · 693 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Yifeng · 693 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. Huashuo · 693 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.