BearingIndex
THE BEARINGINDEX DIRECTORY

ZYS

ZYS publishes precision bearings, screw-support components, complete spindle units and separate inspection/analysis services. Choose the deliverable first, then confirm its controlled drawing, duty, acceptance evidence and responsible supply or laboratory entity.

ZYS · PRECISION PRODUCTS AND LABORATORY SERVICES

Choose the bearing, the spindle or the laboratory brief.

Luoyang Bearing Research Institute Co., Ltd. publishes eight product routes, including precision bearings, components, spindle units and measurement, processing and test equipment. It separately offers bearing inspection and analysis. A bearing order, a complete spindle purchase and a laboratory commission need different technical inputs and acceptance documents. Actual ZYS product/service routes [1]

Prepare a sourcing inquiry
01

Start with the deliverable you need to receive.

Precision bearing or support component

Specify full designation, drawing, arrangement, precision/preload, lubrication and installed duty. Agree whether the supplied item is one bearing, a matched set or an assembled support with accessories.

Complete spindle unit

The actual spindle directory separates high-power grinding, permanent-magnet synchronous, tool-grinding and machining-center spindles. Define the machine interface, tool/workholding, control and cooling/lubrication integration, duty and completed-unit acceptance. A bearing catalogue row cannot specify a spindle system. Actual spindle families [2]

Inspection, analysis or equipment

A commissioned test is a service; a measuring instrument or test machine is equipment. Define the sample and report for a commission, or instrument range/method, fixtures, installation and commissioning for an equipment purchase. The main site lists these as separate routes. Actual route boundaries [1]

Use the route to identify the engineering owner and legal contract party. Group research activity, product-family listings and equipment photos do not establish that a particular configuration is stocked or that every laboratory test carries accreditation.

02

The same envelope does not make C and AC interchangeable.

The actual ultra-high-speed angular-contact page lists H719C, H719AC, H70C and H70AC, with published H719/H70 bore ranges of 8–220 mm. Its table explicitly labels dimensions in mm, ratings in kN and speeds in r/min. The following two rows are a concrete catalogue comparison, not an approved substitute or installed-speed promise. Actual product page and dimensional table [3]

Catalogue designationEnvelope d×D×BPublished Cr / C0rPublished grease / oil limiting speed
H71904C20×37×9 mm5.0 / 2.9 kN53,000 / 80,000 r/min
H71904AC20×37×9 mm4.8 / 2.7 kN45,000 / 67,000 r/min

Cr and C0r are the published dynamic and static radial ratings. These are catalogue fields, not measured service life or the allowable speed of your complete arrangement. The page describes oil-air or jet lubrication as suitable for this product family. Confirm the exact contact-angle definition, material, cage, matched arrangement, preload, lubricant delivery, fits and cooling for the quotation; do not infer these order choices solely from a C/AC label.

Ask for a current controlled drawing and revision-specific data sheet before ordering. A supplier-confirmed operating limit must account for the actual pair/set, preload, loads and heat removal. The public table contains other entries that need clarification; it is not reproduced wholesale or silently corrected here.

03

A screw-support unit includes more than a bearing designation.

The official support-unit page lists BSDU…DF, BSTU…TFT and BSQU…QFC, and describes combining matched bearings with associated accessories into a support component. Its heading uses “滚丝杠球轴承单元” while the introduction calls it a “滚柱丝杠” support. This wording needs engineering clarification; it is not converted here into a confirmed ball-screw or roller-screw fitment. Actual unit description and series [4]

Define the assembly boundary

Identify the supported screw/shaft and drawing, supplied bearings/housing/retention parts, mounting surfaces, bolt/thread pattern and any purchased mating components. Ask for the complete bill of supplied items.

Approve the installed function

Agree bearing arrangement, preload and axial stiffness, load/reversal duty, fits, tightening/retention instructions, lubrication and temperature/running acceptance. Obtain the controlled interface drawing rather than estimating mounting compatibility from one bore value.

The site gives a dimensional-type table, but the examined heading does not explicitly establish units for all fields. Do not assign units, reinterpret ambiguous symbols or assume a published assembly suffix defines your complete mounting arrangement. Ask the responsible engineer to mark each controlled dimension and tolerance.

04

Specify whether you need raw records or an analysis report.

The finished-bearing inspection page lists dimensional and rotational accuracy, clearance, vibration, residual magnetism, contact angle, friction torque and appearance, and explicitly offers original inspection records. It separately lists component geometry/roughness and steel-ball inspection. The failure-analysis page offers failure analysis and technical-evaluation reports, with microscopy, elemental/oxygen-nitrogen and hardness resources. These are different deliverables. Actual inspection scope and raw records [5] Actual failure-analysis report offer [6]

  1. State the decision the evidence must support

    Incoming release, disputed dimensions, abnormal noise, heat or a failed item require different questions. Identify samples, model/suffix, lot, drawing and duty; agree the exact method/edition, conditions, sample quantity and acceptance limits.

  2. Agree the laboratory and document

    Confirm the contracting/testing entity, location, item-by-item scope, calibration and any applicable accreditation requirement. Specify raw numerical records, signed test report, conformity statement or failure-analysis report as appropriate; ask how uncertainty and decision rules are treated where relevant.

  3. Preserve evidence for analysis

    Record orientation, duty, hours and symptoms before agreed teardown. Ask how to retain mating parts, lubricant, seals and debris, and keep each sample tied to its lot. Request findings, probable causes, limitations and any further checks separately.

The service pages use the national bearing inspection-center name; current CNAS/CMA scope and status were not independently established in this review. A named instrument or service list is not proof that your exact method, sample or report is accredited.

05

Standards authorship, product supply and laboratory contracts are separate.

The national standard platform identifies GB/T 24608-2023, inspection rules for rolling bearings and commercial parts, as current, published 28 December 2023 and implemented 1 April 2024, replacing GB/T 24608-2009. Its drafting list separately names Luoyang Bearing Research Institute Co., Ltd., Luoyang Bearing Research Institute Inspection and Testing Co., Ltd. and Shandong Luozhousuo Bearing Research Institute Co., Ltd. That record supports named drafting participation and the standard edition; it does not certify a bearing or establish a laboratory’s present accreditation. Actual national-standard record [7]

Specify the agreed inspection standard and edition in the order or test brief, alongside the controlled drawing and project-specific requirements. No acceptance number is invented from the standard’s title; the examined public record is not its full technical text.

The official contact page gives sales: 0379-64367521, [email protected]; inspection/testing company: 18838169392, [email protected]; and import/export: 0379-64884656, [email protected]. It separately lists a bearing-standardization committee and journal contacts, which are not treated as order contacts. Confirm the actual seller or laboratory legal name, site and deliverable before contracting. Actual role-specific contact directory [8]

The manufacturer also publishes a domestic authorized-dealer list. Check the exact dealer against that page, then confirm current authorization, product/order scope and traceability directly with ZYS. Presence in a dated or changing list does not establish stock, price, technical approval or approval of a different seller using a similar name. Actual manufacturer dealer directory [9]

YOUR NEXT STEP

Prepare a ZYS product or laboratory brief

Tick what you have ready. Copy the full checklist with its current status for your procurement notes.

Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.

Materials to prepare
Continue to sourcing inquiry →

Documented models.

87 model records
Model / bearing familyManufacturerBore dOutside DWidth B / T / LDetails

Evidence, with boundaries.

Our review approach →

Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.

  1. Official company publicationZYS · actual main product and service routes ↗

    Eight product routes and separate services; no stock, project approval or universal laboratory accreditation inferred.

  2. Official product-family pageZYS · spindle and spindle-unit directory ↗

    Grinding, permanent-magnet, tool-grinding and machining-center spindle families; no unlisted completed-unit specification asserted.

  3. Official model table, browser checkedZYS · ultra-high-speed angular-contact bearings ↗

    Actual H71904C/AC dimensions, kN ratings and r/min table fields; installed limits and quotation configuration need approval.

  4. Official product pageZYS · screw-support bearing units ↗

    BSDU/BSTU/BSQU series and matched-bearing/accessory assembly description; wording and dimensional units need clarification.

  5. Official service descriptionZYS · bearing inspection and original records ↗

    Named finished-bearing/component inspection and raw-record deliverable; current accreditation and commissioned method not established.

  6. Official service descriptionZYS · bearing failure analysis ↗

    Analysis/technical-evaluation reports and named resources; no actual failure diagnosis, result or universal accreditation inferred.

  7. Primary national-standard recordNational standard platform · GB/T 24608-2023 ↗

    Current edition, implementation/replacement and distinct drafting entities; not full acceptance text, product certification or laboratory scope.

  8. Official contact publicationZYS · role-specific contact directory ↗

    Separate sales, testing-company, import/export and standards/journal roles; actual contract party and order terms need confirmation.

  9. Official manufacturer dealer directoryZYS · domestic authorized dealers ↗

    Actual published channel list; current seller/product authorization and traceability require direct confirmation.

Report a source correction → · Return to inquiry checklist ↑

Product scope reviewed reviewed

The official website lists precision and special bearings, including angular contact, tapered roller and cylindrical roller bearings.

Scope: Product scope only. No material report, model specification, certification validity or factory audit was reviewed.

Company-level record; not a model test report · 2026-09-21 00:00:00

Source documentation retained for editorial review.

Useful before you source.

Read d, D and B before comparing a bearing →

What a bearing evidence label actually tells you →

Write a bearing inquiry a manufacturer can answer →