BearingIndex
THE BEARINGINDEX DIRECTORY

5207 — 35 × 72 × 27 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 27 mmD = 72 mmd = 35 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

5207

5207 is a deep groove ball designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 35 × 72 × 27 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
35 mm
Outside D
72 mm
Width B
27 mm

Compare the 1 publication

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-30

Is TSB’s 5207 the same bearing as an NSK or NTN 5207?

Not on the evidence published. TSB lists 5207 in a table titled “Double Row Series Deep Groove Ball Bearing” with a dynamic load of 12.007 kN. NSK and NTN list 5207 as a double-row angular-contact bearing rated 43 kN and 39 kN. The size is the same; the published construction and rating are not.

One envelope, three published ratings.

Maker and designationConstruction as publishedDynamic ratingStatic ratingSpeeds as printedMass
TSB 5207 [1]Double row deep groove12.007 KNNot printedNot printedNot printed
NSK 5207 [3]Double-row angular contact43,000 N28,700 NGrease 6,300, oil 8,000 min⁻¹0.43 kg
NTN 5207 [4]Double-row angular contact, open39.00 kN28.70 kNNot checked0.452 kg

TSB’s 12.007 kN is under a third of NSK’s 43 kN. TSB does not describe the internal design behind its figure, and this page does not guess at it. Two things follow for a buyer. A life calculation made with NSK’s or NTN’s rating does not hold for the TSB part. And if the old bearing is an angular-contact 5207 that carries axial load, a deep-groove double-row part of the same size is a design change, not a like-for-like replacement.

TSB has a separate Angular Contact category [2], and it lists no 52xx designation. Ask TSB for the sectional drawing and the contact angle of the part it will ship, and keep the old drawing’s construction requirement on the enquiry.

What TSB’s row does tell you.

TSB fieldPrinted valueWhat it establishes
I.D / O.D35 / 72 mmNominal shaft and housing interfaces.
I.D / O.D tolerance0/−12 / 0/−13 μmBearing deviations: bore 34.988–35.000 mm, outside diameter 71.987–72.000 mm. Not the shaft or housing tolerance.
Width, open / shields-seals27.0 / 27.0 mmThe closed version keeps the same width. The closure and grease still need naming.
Basic dynamic load12.007 KNTSB’s own figure. No static rating, speed or mass is given.

For shoulders, NSK gives da min 42 mm, Da max 65 mm and ra max 1 mm for its 5207. [3] Those are NSK’s limits; ask TSB for its own drawing before reusing a shaft or housing.

TSB’s quality certificate covers bearing sales, not bearing production.

The row comes from 天胜轴承集团有限公司 (Tiansheng Bearing Group Co., Ltd., trading as TSB), No. 18 Yongjiang South Road, Beilun, Ningbo, Zhejiang. Its history page dates the company to 1991. [6]

TSB shows an ISO 9001:2015 certificate, No. 02425Q32101518R3S, issued by Shenzhen Universal Certification Centre, valid from 10-09-2025 until 10-08-2028 as printed. Its scope reads: production of garden machinery parts; sales of bearings and accessories. [5] Bearing manufacture is not in that scope. The site also says “TS16949 certified: April, 2007”, but shows no certificate for it.

So ask TSB which plant makes the 5207 you will receive, and for that plant’s current quality certificate. An ISO 14001 certificate on the same site belongs to a different company, ZVL AUTO in Slovakia, not to TSB.

What each manufacturer published.

ManufacturerSource recorded
TSB
5207
TSB’s current Double Row Series table prints 5207 as I.D 35 mm (0/−12 μm), O.D 72 mm (0/−13 μm), width 27.0 mm open and 27.0 mm shields/seals, and BASIC DYNAMIC LOAD 12.007 KN. It prints no static rating, speed or mass.
2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 218.5 mm
Mean diameter dm(D + d) / 253.5 mm

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 5207.

TSB

Ningbo, Zhejiang, China

Standard and custom ball and roller bearings

TSB publishes both bearing families and equipment-component routes. Its 502-0113 mower assembly specifies a particular 6203-based variant, while older factory and JIT pages need current confirmation; buyers should qualify the assembly, plant and delivery programme separately.

Published ranges: Standard and custom ball bearings · Cylindrical roller bearings · Tapered roller bearings · Custom bearing and seal arrangements

18 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask TSB about 5207

Other designations with the same 35x72x27 mm envelope.

DesignationBearing familyWorks
63207AT1XDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
5200—Deep groove ball1
520112 × 32 × 15.9Deep groove ball1
520215 × 35 × 15.9Deep groove ball1
520317 × 40 × 17.5Deep groove ball1
520420 × 47 × 20.6Deep groove ball1
520525 × 52 × 20.6Deep groove ball1
520630 × 62 × 23.8Deep groove ball1
520840 × 80 × 30.2Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 5207.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. TSB · 5207 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. TSB · Double Row Series table (天胜轴承集团有限公司) ↗

    5207 row: I.D 35 mm 0/−12 μm, O.D 72 mm 0/−13 μm, width open 27.0 / shields-seals 27.0 mm, BASIC DYNAMIC LOAD-KN 12.007. Table title “Double Row Series Deep Groove Ball Bearing”. No other columns. Read 2026-10-30.

  2. TSB · Angular Contact Ball Bearing page ↗

    TSB’s angular-contact category; lists no 52xx designation. Read 2026-10-30.

  3. NSK · 5207 double-row angular contact ball bearing ↗

    NSK values only: 35/72/27 mm, Cr 43000 N, C0r 28700 N, grease 6300 / oil 8000 min⁻¹, 0.43 kg, da min 42, Da max 65, ra max 1 mm. Read 2026-10-30.

  4. NTN Americas · 5207 double row angular contact ball bearing ↗

    NTN values only: open, dynamic 39.00 kN, static 28.70 kN, 0.452 kg. Read 2026-10-30.

  5. TSB · Bearing Group certificate page ↗

    ISO 9001:2015 certificate image: No. 02425Q32101518R3S, Shenzhen Universal Certification Centre, issued 10-09-2025, valid until 10-08-2028, scope garden machinery parts production and bearing sales. Text claim “TS16949 certified: April, 2007” without a certificate. Read 2026-10-30.

  6. TSB · history and contact ↗

    “1991 Ningbo TSB Corporation Established”; contact page http://www.tsbnb.com/?page_c/contact.html gives No. 18 Yongjiang South Road, Beilun, Ningbo 315800. Read 2026-10-30.

Guide checked 2026-10-30. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.