BearingIndex
THE BEARINGINDEX DIRECTORY

6008 — 40 × 68 × 15 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 15 mmD = 68 mmd = 40 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

6008

6008 is a deep groove ball designation documented on BearingIndex from 6 manufacturer publications. The published boundary dimensions are 40 × 68 × 15 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
40 mm
Outside D
68 mm
Width B
15 mm

Compare the 6 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Reference mass (kg)Source recorded
Sihai
6008
——————2026-09-24 source ↗Request
CZ
6008
——————2026-09-24 source ↗Request
SILL
6008
——————2026-09-24 source ↗Request
RCL
6008
16.82411.4931000012000—0.1922026-09-24 source ↗Request
HOTO
6008
13.19.4585001100010.1852026-09-24 source ↗Request
INYOUNG
6008
1711.7960012000—0.192026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 13.1 – 17 kN across 3 sources3
Static load ratingRanges 9.45 – 11.7 kN across 3 sources3
Limiting speed — greaseRanges 8500 – 10000 rpm across 3 sources3
Limiting speed — oilRanges 11000 – 12000 rpm across 3 sources3
Reference massRanges 0.185 – 0.192 kg across 3 sources3

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 214 mm
Mean diameter dm(D + d) / 254 mm
C / C₀ load ratio (3 sources)dynamic ÷ static load ratingRCL 1.46 · HOTO 1.39 · INYOUNG 1.45

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 6008.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 6008

HOTO

Ningbo, Zhejiang, China

Miniature deep groove motor bearings

Small motor and miniature deep-groove bearings; official 60, 62 and 69 tables support a same-bore comparison, with speed-data and qualification limits made explicit.

Published ranges: Miniature deep groove ball bearings · 6000 and 6200-series motor bearings

29 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask HOTO about 6008

INYOUNG

Taizhou, Zhejiang, China

Ball and roller bearings from Wenling

INYOUNG publishes ball and roller bearing families from Wenling. Its deep-groove tables show why bore size alone is insufficient for replacement, while its material pages distinguish bearing-steel and stainless options. Obtain the current model drawing and confirm the offered material, closure and lubrication; online access limitations and catalogue inconsistencies remain unresolved.

Published ranges: Deep groove ball bearings · Cylindrical and tapered roller bearings · Spherical roller bearings · Angular contact bearings

93 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask INYOUNG about 6008

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 6008

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 6008

SILL

Ningbo, Zhejiang, China

Deep groove and tapered roller bearings

Deep-groove procurement from published stock to controlled order, with actual 6000 geometry, five inspection stages, carton examples and dated certificate checks.

Published ranges: 6000, 6200 and 6300 deep groove series · Tapered roller bearings · Nonstandard bearing designs

20 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SILL about 6008

Applications the publishing works state.

ApplicationStated by
Air compressorsINYOUNG
Automotive systemsSihai
BicyclesRCL
Brushless motorsCZ
Circular loomsRCL
DronesCZ
Encoders and motorsRCL
FansHOTO
Garden toolsCZ
GeneratorsINYOUNG
Household appliancesSihai
MotorcyclesINYOUNG
Office automationHOTO
Office equipmentSihai
Power toolsCZ, Sihai
RoboticsRCL
Vacuum cleanersHOTO
Water purifiersHOTO

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter.

Ask the manufacturer for these when you enquire.

Other designations with the same 40x68x15 mm envelope.

DesignationBearing familyWorks
6008-2RZDeep groove ball1
6008T1XDeep groove ball1
6008TBDeep groove ball1
6008ZZ/2RSDeep groove ball1
H7008-AC-TA-HQ1-P4Angular contact1
H7008-AC-TA-P4Angular contact1
H7008-C-TA-2RZ-HQ1-P4Angular contact1
H7008-C-TA-HQ1-P4Angular contact1
H7008-C-TA-P4Angular contact1
N1008 KCylindrical roller1
S6008ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
600010 × 26 × 8Deep groove ball12
6000-2RS10 × 26 × 8Deep groove ball1
6000E10 × 26 × 8Deep groove ball1
6000T1X10 × 26 × 8Deep groove ball1
6000TB10 × 26 × 8Deep groove ball1
6000ZZ—Deep groove ball2
6000ZZ/2RS10 × 26 × 8Deep groove ball1
600112 × 28 × 8Deep groove ball9
6001-2RS12 × 28 × 8Deep groove ball1
6001-2RZ12 × 28 × 8Deep groove ball1
6001E12 × 28 × 8Deep groove ball1
6001G12 × 28 × 8Deep groove ball1
6001T1X12 × 28 × 8Deep groove ball1
6001TB12 × 28 × 8Deep groove ball1
6001zz12 × 28 × 8Deep groove ball2
6001ZZ/2RS12 × 28 × 8Deep groove ball1
600215 × 32 × 9Deep groove ball10
6002-2RZ15 × 32 × 9Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 6008.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. SILL · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. RCL · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. HOTO · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. INYOUNG · 6008 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.