BearingIndex
THE BEARINGINDEX DIRECTORY

605 — 5 × 14 × 5 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 5 mmD = 14 mmd = 5 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

605

605 is a deep groove ball designation documented on BearingIndex from 7 manufacturer publications. The published boundary dimensions are 5 × 14 × 5 mm. The publishing works are in Zhejiang, Fujian provinces, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
5 mm
Outside D
14 mm
Width B
5 mm

Compare the 7 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Reference mass (kg)Source recorded
Sihai
605
————————2026-09-24 source ↗Request
CZ
605
————————2026-09-24 source ↗Request
SILL
605
————————2026-09-24 source ↗Request
Runstar
605
————————2026-09-24 source ↗Request
Yuyao Global
605
————————2026-09-24 source ↗Request
RCL
605
1.3280.5074000050000———0.00372026-09-24 source ↗Request
Yuyao Xinfeng
605
1.070.42——0.282—2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 1.07 – 1.328 kN across 2 sources2
Static load ratingRanges 0.42 – 0.507 kN across 2 sources2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 24.5 mm
Mean diameter dm(D + d) / 29.5 mm
C / C₀ load ratio (2 sources)dynamic ÷ static load ratingRCL 2.62 · Yuyao Xinfeng 2.55

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 605.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 605

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 605

Runstar

Zhangzhou, Fujian, China

Miniature ball and thrust bearings

Runstar publishes miniature, flanged and thrust bearings, with separate dental and ceramic product routes. Its SF692 variants have different ring widths, and some published dimensional or mass entries require clarification. Use the complete designation and controlled drawing for the offered product; catalogue application labels do not establish medical approval or a verified ceramic composition.

Published ranges: Miniature deep groove ball bearings · Small deep groove ball bearings · Flat thrust ball bearings · Nonstandard miniature designs

223 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Runstar about 605

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 605

SILL

Ningbo, Zhejiang, China

Deep groove and tapered roller bearings

Deep-groove procurement from published stock to controlled order, with actual 6000 geometry, five inspection stages, carton examples and dated certificate checks.

Published ranges: 6000, 6200 and 6300 deep groove series · Tapered roller bearings · Nonstandard bearing designs

20 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SILL about 605

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 605

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 605

Applications the publishing works state.

ApplicationStated by
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesRCL, Yuyao Xinfeng
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Encoders and motorsRCL
Fishing tackleRunstar
Garden toolsCZ
Household appliancesSihai, Yuyao Global
Medical equipmentRunstar, Yuyao Global
Office equipmentSihai
Power toolsCZ, Sihai
Precision instrumentsRunstar
RoboticsRCL
Small motorsRunstar

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Other designations with the same 5x14x5 mm envelope.

DesignationBearing familyWorks
605 ZZDeep groove ball2
605ZZ/2RSDeep groove ball1
S605Deep groove ball1
S605ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
600010 × 26 × 8Deep groove ball12
6000-2RS10 × 26 × 8Deep groove ball1
6000E10 × 26 × 8Deep groove ball1
6000T1X10 × 26 × 8Deep groove ball1
6000TB10 × 26 × 8Deep groove ball1
6000zz—Deep groove ball2
6000ZZ/2RS10 × 26 × 8Deep groove ball1
600112 × 28 × 8Deep groove ball9
6001-2RS12 × 28 × 8Deep groove ball1
6001-2RZ12 × 28 × 8Deep groove ball1
6001E12 × 28 × 8Deep groove ball1
6001G12 × 28 × 8Deep groove ball1
6001T1X12 × 28 × 8Deep groove ball1
6001TB12 × 28 × 8Deep groove ball1
6001ZZ12 × 28 × 8Deep groove ball2
6001ZZ/2RS12 × 28 × 8Deep groove ball1
600215 × 32 × 9Deep groove ball10
6002-2RZ15 × 32 × 9Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 605.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. SILL · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Runstar · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. Yuyao Global · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. RCL · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  7. Yuyao Xinfeng · 605 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.