BearingIndex
THE BEARINGINDEX DIRECTORY

636 — 6 × 22 × 7 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 7 mmD = 22 mmd = 6 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

636

636 is a deep groove ball designation documented on BearingIndex from 4 manufacturer publications. The published boundary dimensions are 6 × 22 × 7 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
6 mm
Outside D
22 mm
Width B
7 mm

Compare the 4 publications

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-08

What would prove that a 636 order meets your low-noise requirement?

Xinfeng places 636 in a low-noise range. Global publishes separate vibration and grease tables in its catalogue. Neither fact identifies the vibration grade, grease or measured sound of the 636 lot you are buying. Define that missing evidence before choosing the quotation.

A range heading and a grade table are different from a result for your 636.

Xinfeng’s 6300-series table [1] gives the exact 636 dimensions and load figures under a low-noise range heading. The examined row has no test result, ordered noise grade or measurement condition. The heading supports the supplier’s range description; it does not specify the acceptance of a particular batch.

Global’s catalogue [2] puts the 636 parameter row on printed page 10. Its grease information and Z/V vibration tables appear separately on printed pages 7–8. Their presence does not assign a grease or a Z/V grade to every 636 shipped.

Ask which requirement the quote actually includes. If the response points to the general grade table, ask the supplier to identify the selected grade, applicable test method and results or agreed inspection record for the offered 636 configuration. A general brochure does not close that gap.

Are you buying a bearing vibration grade, or a quieter assembled product?

For a bearing-level vibration requirement, put the selected grade and the supplier’s test method on the order. Agree measurement units, test speed, test bands where applicable and the inspection or sampling rule. This page does not transcribe unclear vibration-table units or invent a limit for either manufacturer.

For sound measured in your completed mechanism, supply the assembly test condition instead: operating speed and load, measurement position, background conditions and the sound criterion used by the product owner. Ask the supplier whether its bearing-level report can support that condition or whether a configured sample needs evaluation in the assembly. An isolated-bearing grade is not itself an installed sound result.

Keep the selected closure and grease attached to either requirement. Global’s separate grease list is not proof of the lubricant in the offered 636; obtain its actual specification. If two quotations propose different configurations or different tests, they have not yet quoted the same low-noise requirement.

Use the two verified rows after the noise requirement is defined.

FieldXinfeng 636Global 636
Dimensions / minimum radius6 / 22 / 7 mm; 0.3 mm6 / 22 / 7 mm; 0.3 mm
Dynamic / static rating3.31 / 1.38 kN3290 / 1360 N
Ball complement7 × 3.969 mm7 × 3.969 mm
Grease / oil catalogue speedNot given in this row30,000 / 36,000 r/min
MassNot given in this row0.013 kg

Global’s ratings convert to 3.29 / 1.36 kN. The small differences from Xinfeng are catalogue differences, not measured noise differences. The speed entries do not establish an acceptable sound level at those speeds.

The directory has two additional historical manufacturer records. This guide freshly verified the two sources above, not all four. If another maker supplies the shortlisted quotation, obtain its own 636 configuration and noise evidence instead of assigning it these figures.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Source recorded
Sihai
636
—————2026-09-24 source ↗Request
CZ
636
—————2026-09-24 source ↗Request
Yuyao Global
636
—————2026-09-24 source ↗Request
Yuyao Xinfeng
636
3.311.380.373.9692026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 28 mm
Mean diameter dm(D + d) / 214 mm
C / C₀ load ratiodynamic ÷ static load ratingYuyao Xinfeng 2.4

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 636.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 636

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 636

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 636

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 636

Applications the publishing works state.

ApplicationStated by
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesYuyao Xinfeng
Brushless motorsCZ
Communications equipmentYuyao Global
DronesCZ
Garden toolsCZ
Household appliancesSihai, Yuyao Global
Medical equipmentYuyao Global
Office equipmentSihai
Power toolsCZ, Sihai

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Reference mass.

Ask the manufacturer for these when you enquire.

Other designations with the same 6x22x7 mm envelope.

DesignationBearing familyWorks
636 ZZDeep groove ball1
636ZZ/2RSDeep groove ball1
S636ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
6300—Deep groove ball7
6300-2RS10 × 35 × 11Deep groove ball1
6300-2RZ10 × 35 × 11Deep groove ball1
6300E10 × 35 × 11Deep groove ball1
6300ZZ10 × 35 × 11Deep groove ball1
6300ZZ/2RS10 × 35 × 11Deep groove ball1
6301—Deep groove ball5
6301-2RZ12 × 37 × 12Deep groove ball1
6301E12 × 37 × 12Deep groove ball1
6301T1X12 × 37 × 12Deep groove ball1
6301ZZ/2RS12 × 37 × 12Deep groove ball1
6302—Deep groove ball5
6302-2RZ15 × 42 × 13Deep groove ball1
6302E15 × 42 × 13Deep groove ball1
6302T1X15 × 42 × 13Deep groove ball1
6302ZZ/2RS15 × 42 × 13Deep groove ball1
6303—Deep groove ball5
6303-2RZ17 × 47 × 14Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 636.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 636 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 636 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. Yuyao Global · 636 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Yuyao Xinfeng · 636 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. Yuyao Xinfeng · actual 6300-series table ↗

    636 row, dimensional and kN headings, ball complement and low-noise range heading. No per-order noise report or speed established.

  2. Yuyao Global · manufacturer product catalogue ↗

    PDF page 6, printed page 10: actual 636 dimensions, N ratings, speed and mass. PDF page 5, printed pages 7–8: separate grease and vibration tables, not proof of an ordered grade.

Guide checked 2026-10-08. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.