Yuyao Xinfeng
YYXF publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pairing specification; check the exact model covered by its published Zhejiang Made certificate.
Start with the assembly interface, then specify the bearing.
Yuyao Xinfeng’s catalogue spans bicycle headset, hub and bottom-bracket items, low-noise deep-groove bearings, automotive steering, large-bore thin-wall forms and matched angular-contact pairs. These routes need different approval evidence. A similar-looking ring or a broad “bicycle bearing” label does not establish fit, seating geometry, preload or installed performance. Actual company scope [1] Actual bicycle routes [2] Matched-pair route [3]
Headset, hub and bottom-bracket enquiries need different drawings.
The actual bicycle category separates headset, hub and bottom-bracket products. The inspected headset detail is an image-led item, not a controlled model table. Its appearance does not establish the offered dimensions, contact/seating angles, material or compatibility with a particular bicycle. Use the assembly drawing and obtain the actual offered specification. Actual category distinctions [2] Actual headset detail [4]
Headset
Provide fork/frame and mating-seat drawings, bearing envelope and the required seating/contact geometry, retention and adjustment. Identify the exact headset assembly and drawing revision; a ring photograph does not establish a drop-in replacement.
Hub
Define axle and housing fits, bearing positions/spacers, retention, installed clearance or preload and contamination exposure. Agree assembled rotation/torque and runout under the actual adjustment.
Bottom bracket
Identify spindle, shell, cups/adapters and the complete bearing location/fit arrangement. Specify seal and grease build and installed torque/noise acceptance after fitting; do not select only by bore or product category.
For wet or dirty use, request the exact seal contact arrangement, lubricant/fill and corrosion/material evidence and agree an exposure test. “High-grade bicycle” is a product category, not a waterproof rating or a fatigue-life result. Tooling, samples, quantity and lead time must be confirmed for the controlled item.
A contact-angle suffix still leaves the matched assembly to specify.
The original catalogue’s 70/72-series angular-contact page explicitly states C = 15°, AC = 25° and B = 40° nominal contact angles. It shows 7000C and 7000AC as separate rows with different load entries. The web category separately advertises high-precision angular-contact pairs. These are actual publications; they do not establish that an arbitrary pair is matched, interchangeable or approved for the buyer’s preload and duty. Catalogue, printed page 11 [5] Actual pair category [3]
Define the arrangement
State the full model and contact angle, required pair arrangement/orientation, shaft/housing interfaces and applied radial/axial load directions. Request an assembly drawing and identification of the supplied matched set.
Approve the matching condition
Specify precision/runout, preload or axial clearance and the method/load/temperature used to measure it. Agree face offsets, marking, assembly orientation and whether replacement requires the complete matched set.
Test after mounting
Use the actual fits, spacers, clamping and lubrication. Measure agreed torque, runout, temperature and vibration under defined duty and retain the sample/set identity with the results.
The catalogue also separates vibration-velocity bands in μm/s from vibration-acceleration levels in dB and lists grease guidance and dimensional tolerance tables. Do not mix those measurement types or treat a generic grease temperature range as the offered bearing’s approved operating range. Agree applicable methods, numerical limits and the exact lubricant/build for the order. Catalogue, printed pages 7–10 [5]
The published Zhejiang Made certificate names one bicycle-steering item.
The manufacturer’s original downloadable scan is certificate CZJM2024P1037901R0M. It names Yuyao Xinfeng as applicant, producer and manufacturing enterprise at 111 Xinxin Road, Langxia, Yuyao, with product “bicycle steering bearing” and model AC30416.5-36-45-2RS. It lists DB33/T 944.1-2014, DB33/T 944.2-2017 and T/ZZB 3091-2023, issued 26 June 2024 with printed expiry 25 June 2030. Original scan, visually examined [6]
The scan says validity is maintained through supervision and status can be checked with the certification organisation. This review did not independently establish current issuer status. The listed model/site scope cannot be expanded to every headset, hub, angular-contact, automotive or custom item. Request the current status, applicable annex and evidence linking the actual ordered model to the certificate.
The national group-standards platform’s 2023 first-batch Zhejiang Made publication list identifies T/ZZB 3091-2023, Rolling bearings — Bicycle steering bearings, with Yuyao Xinfeng as lead drafting organisation. That establishes the published standard/drafting record, not compliance of every delivered item. The separate government 2024 first-batch technology-SME list includes entry 1187, 2024330281A8001187; that is an administrative company record, not product certification. Original standard publication list [7] Original government list, PDF page 48 [8]
Agree which measurements release the actual product.
The manufacturer publishes workshop captions including heat treatment, grinding, steering-bearing production, automatic bore measurement, superfinished-race inspection, cleaning/assembly and laser marking. Its R&D page identifies a microhardness tester, BVT-1 vibration instrument, S0910 noise instrument, roughness instrument and roundness instrument. These captions guide an audit; they do not prove accreditation, calibration or a particular lot’s results. Ask which route and equipment apply to the offered model. Actual workshop descriptions [1] Actual R&D instruments [9]
For sample acceptance
Link material and heat-treatment evidence where required, dimensional/runout and clearance or pair-preload results to the controlled item. Add the agreed installed functional tests and keep mating-part and assembly settings.
The about page contains dated development history and conflicting annual-production figures in different portions. It also mentions legacy ISO9000/TS16949 wording. Neither establishes current available capacity or a present automotive quality certificate. Obtain current site/capacity and required issuer documents rather than repeating historical claims as today’s facts. Actual dated company text [1]
Published contacts are domestic sales 0574-62197156, export sales 0574-62194587, general manager 0574-62195777, fax 0574-62195577 and [email protected]. The contact page describes Xinxin Industrial Zone, Langxia; the certificate gives the more specific Xinxin Road 111. Confirm delivery/visit address and legal contracting details directly, together with sample/tooling cost, MOQ and lead time. Actual departmental contacts [10] Certificate site wording [6]
Prepare a YYXF interface or matched-set enquiry
Tick what you have ready. Copy the full checklist with its current status for your procurement notes.
Checks stay in this page and reset on reload. Nothing is sent to the manufacturer. The inquiry link opens a separate form.
Documented models.
36 model recordsEvidence, with boundaries.
Our review approach →Facts above are attributed to their source. Buying and qualification steps are BearingIndex editorial suggestions. Sources checked ; this is not the sources’ publication date or an independent factory audit.
- Manufacturer self-descriptionYYXF · actual company and workshop descriptions ↗
Product scope and workshop captions; historical/conflicting capacity and legacy system wording do not establish current output or certification.
- Manufacturer product listingsYYXF · actual bicycle categories ↗
Separate headset, hub and bottom-bracket routes; no model fitment or waterproof rating inferred.
- Manufacturer product routeYYXF · actual angular-contact pair category ↗
Pair category and image-led details; offered matching, preload and orientation require controlled specifications.
- Manufacturer page/image read in browserYYXF · actual headset detail ↗
Image-led headset item; dimensions, angles, material and bicycle interchangeability not inferred from photograph.
- Original PDF, visually examinedYYXF · original product catalogue ↗
Printed pages 7–11: grease guidance, tolerance/vibration distinctions and C/AC/B contact angles; upload path not a current specification or certification date.
- Manufacturer-hosted original scan, rendered and readYYXF · original Zhejiang Made certificate ↗
Named bicycle-steering model, Xinxin Road 111 site and printed issue/expiry dates; current issuer supervision/status not independently established or expanded to other products.
- Primary standards publication listGroup standards platform · 2023 Zhejiang Made publication list ↗
Entry 62, T/ZZB 3091-2023 and company lead-drafting identity; no inferred lot compliance or universal product qualification.
- Original government PDF, extracted and visually examinedNingbo government · 2024 first-batch technology-SME list ↗
PDF page 48, entry 1187 and 2024330281A8001187; administrative record separate from product certification.
- Manufacturer equipment publicationYYXF · actual R&D instrument captions ↗
Named hardness/vibration/noise/roughness/roundness instruments; calibration, accreditation and actual lot reports not established.
- Manufacturer contact publicationYYXF · actual departmental contacts ↗
Domestic/export/manager phones, fax, email and industrial-zone wording; legal and delivery/site details require direct confirmation.
Report a source correction → · Return to inquiry checklist ↑
Yuyao Xinfeng published product scope reviewed
The manufacturer website describes small ball bearings and custom assemblies.
Scope: Official website product scope only. No independent factory audit, material-report review or model-level performance validation is implied.
Company-level record; not a model test report · 2026-09-24 04:20:34
Source documentation retained for editorial review.