BearingIndex
THE BEARINGINDEX DIRECTORY

629 — 9 × 26 × 8 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 8 mmD = 26 mmd = 9 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

629

629 is a deep groove ball designation documented on BearingIndex from 6 manufacturer publications. The published boundary dimensions are 9 × 26 × 8 mm. The publishing works are in Zhejiang, Shanghai provinces, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
9 mm
Outside D
26 mm
Width B
8 mm

Compare the 6 publications

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Minimum corner radius (mm)Ball count (pcs)Ball diameter (mm)Reference mass (kg)Source recorded
Sihai
629
————————2026-09-24 source ↗Request
CZ
629
————————2026-09-24 source ↗Request
SFH
629
————————2026-09-24 source ↗Request
Yuyao Global
629
————————2026-09-24 source ↗Request
RCL
629
4.5571.9532800034000———0.01912026-09-24 source ↗Request
Yuyao Xinfeng
629
4.551.95——0.374.762—2026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Compare the recorded figures.

PropertyFindingSources
Dynamic load ratingRanges 4.55 – 4.557 kN across 2 sources2
Static load ratingRanges 1.95 – 1.953 kN across 2 sources2

Where the figures differ, use the drawing from the manufacturer you buy from.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 28.5 mm
Mean diameter dm(D + d) / 217.5 mm
C / C₀ load ratio (2 sources)dynamic ÷ static load ratingRCL 2.33 · Yuyao Xinfeng 2.33

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 629.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 629

RCL

Ningbo, Zhejiang, China

Thin-wall ball bearings for compact mechanisms

RCL publishes 67/68/69, MR and 16 thin-section families and a harmonic-reducer bearing page. Its 67-series description explicitly asks designers to consider load capacity; encoder and flexible-bearing applications need different qualification inputs.

Published ranges: 67- and 68-series thin-wall bearings · 69-series ball bearings · 60-series ball bearings

131 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask RCL about 629

SFH

Shanghai, China

Miniature and thin-section ball bearings

SFH publishes miniature, flanged, thin-section and nonstandard bearing designs, with Wuxi production and Shanghai technical or inspection functions described on its company page. Specify the complete material, cage, closure and lubricant configuration, and confirm the current production site and certificate scope. Ceramic balls alone do not establish a nonmagnetic bearing.

Published ranges: Metric and inch miniature deep groove bearings · Flanged miniature bearings · Thin-section ball bearings · Double-row angular contact and thrust bearings

51 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask SFH about 629

Sihai

Ningbo, Zhejiang, China

Deep groove bearings for motors and automotive use

Sihai publishes a separate automotive table with wider 63001 and 62201 references, plus high-temperature generator grease, C3 and seal-material statements. Compare the actual section and complete offered build rather than replacing these with similar ordinary catalogue numbers. Its displayed IATF document covers miniature deep-groove manufacture with product design excluded; request current verified status and a part-specific automotive approval package.

Published ranges: 6000, 6200 and 6300 series · 6800 and 6900 series · Automotive engine-bearing applications

85 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Sihai about 629

Yuyao Global

Ningbo, Zhejiang, China

Miniature and small bearings

Global publishes ordinary shielded/sealed bearings alongside nonstandard steel and polymer pulley assemblies. Its scanned catalogue provides useful part-specific dimensions and construction examples; distinguish bore from shaft dimensions, match the complete assembly drawing, and confirm lubricant, noise testing and the current contracting entity.

Published ranges: Miniature and small bearings · Rubber-sealed bearing designs · Metal-shielded bearing designs

71 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Global about 629

Yuyao Xinfeng

Ningbo, Zhejiang, China

Small ball bearings and custom assemblies

Yuyao Xinfeng publishes bicycle headset, hub and bottom-bracket bearings alongside angular-contact pairs, steering and custom products. Match the assembly interface and pair arrangement to the offered drawing. Its published Zhejiang Made certificate covers a particular model; confirm that scope and current status for the proposed order.

Published ranges: Single- and double-row deep groove ball bearings · Metric and inch miniature bearings · Steering and bicycle-bearing designs · Thin-ring and nonstandard assemblies

36 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask Yuyao Xinfeng about 629

Applications the publishing works state.

ApplicationStated by
Automotive steeringYuyao Xinfeng
Automotive systemsSihai, Yuyao Global
BicyclesRCL, Yuyao Xinfeng
Brushless motorsCZ
Circular loomsRCL
Communications equipmentYuyao Global
DronesCZ
Encoders and motorsRCL
Garden toolsCZ
Household appliancesSihai, Yuyao Global
Medical equipmentYuyao Global
Office equipmentSihai
Power toolsCZ, Sihai
Precision machinerySFH
Precision motorsSFH
RoboticsRCL

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix.

Ask the manufacturer for these when you enquire.

Other designations with the same 9x26x8 mm envelope.

DesignationBearing familyWorks
629 ZZDeep groove ball2
629ZZ/2RSDeep groove ball1
S629ZZ/2RSDeep groove ball1

Same envelope, but sealing, internal design, clearance and load capability differ — not interchangeable by default.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
6200—Deep groove ball10
6200-2RS10 × 28 × 8Deep groove ball1
6200-2RZ10 × 30 × 9Deep groove ball1
6200E10 × 30 × 9Deep groove ball1
6200T1X10 × 30 × 9Deep groove ball1
6200TB10 × 30 × 9Deep groove ball1
6200zz—Deep groove ball2
6200ZZ/2RS10 × 30 × 9Deep groove ball1
620112 × 32 × 10Deep groove ball9
6201-2RS12 × 32 × 10Deep groove ball1
6201-2RZ12 × 32 × 10Deep groove ball1
6201E12 × 32 × 10Deep groove ball1
6201T1X12 × 32 × 10Deep groove ball1
6201TB12 × 32 × 10Deep groove ball1
6201zz—Deep groove ball2
6201ZZ/2RS12 × 32 × 10Deep groove ball1
620215 × 35 × 11Deep groove ball8
6202-2RZ15 × 35 × 11Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 629.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. Sihai · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. CZ · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  3. SFH · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  4. Yuyao Global · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  5. RCL · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  6. Yuyao Xinfeng · 629 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.