Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Spherical roller
21306CTN1
21306CTN1 is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 30 × 72 × 19 mm. Every value below comes from that manufacturer’s own published material, with the date it was recorded.
A 21306KCTN1 offer changes the mounting question even when the table still starts with 30 mm.
ZYS places 21306CTN1 in the cylindrical-bore column and 21306KCTN1 in the tapered-bore column. Before accepting a substituted quotation, identify the actual bore construction, shaft arrangement and mounting acceptance method. The shared catalogue row does not make them direct replacements.
The K is a construction change, not an optional spelling variation.
ZYS’s exact row [1] gives 21306CTN1 under “Cylindrical Bore” and 21306KCTN1 under “Tapered Bore”. Preserve the maker’s actual designation in the quotation and drawing. Do not add or remove K when normalizing an order reference.
Proposed item
What ZYS identifies
What the installation review needs
21306CTN1
Cylindrical bore; table d/D/B 30/72/19 mm.
The actual cylindrical seat and specified fit, shoulders, retention and complete supplied clearance.
21306KCTN1
Tapered-bore item in the adjacent column. The series description identifies K as a 1:12 taper.
The controlled taper-seat or sleeve assembly, its shaft dimensions and the maker’s mounting criteria.
The 30 mm catalogue bore entry does not identify the shaft diameter of a proposed sleeve assembly. The sleeve and its fit to the shaft need their own dimensions. The examined ZYS row provides no sleeve part number or locking-component drawing, so this page does not select one or approve it on a nominal 30 mm shaft.
If a supplier offers K as the available alternative, compare its complete mounting assembly with the original cylindrical arrangement before accepting. A quotation giving only “30 × 72 × 19” leaves this construction difference unresolved.
“Tighten securely” does not specify the required interference and remaining clearance.
ZYS explains at series level that moving the inner ring axially on a taper changes radial clearance. It does not publish the model-specific drive-up or clearance-reduction target for this offered item. Do not manufacture a tightening torque or a drive-up distance from the catalogue dimensions.
SKF’s tapered-bore mounting guidance [2] distinguishes measuring clearance reduction, axial drive-up and locknut angle, among other methods. Its accompanying table also warns that achieving the mounting interference does not itself ensure correct radial clearance in operation: housing fit and ring-temperature differences remain relevant. These are useful distinctions for asking ZYS for its procedure; SKF’s numerical table values are not mounting settings for ZYS 21306KCTN1.
Request a procedure stating the selected method, its starting condition, applicable tolerances and acceptance targets. Record the actual pre-mounting and mounting readings required by that procedure, and identify the bearing’s complete clearance designation. For the cylindrical item, request its specified fits and resulting clearance assessment instead of applying a tapered-bore drive-up instruction.
Keep the installation record linked to the actual offered bearing, seat or sleeve, instruments and procedure revision. A completed entry saying only that the locknut is tight cannot show that the maker’s interference and clearance requirements were met. No mounting operation or clearance measurement has been performed for this page.
Have the quotation return a complete arrangement, not a bare suffix substitution.
A reviewable reply identifies the offered cylindrical or tapered construction; supplies the applicable bearing and shaft/sleeve drawings; includes the required locking components if a sleeve is proposed; states the mounting method and acceptance criteria; and assesses the operating clearance with the housing fit and temperature conditions. Approval of one document does not automatically cover the others.
The actual CTN1 row lists Cr 63.8 kN, Cor 65.4 kN and grease/oil limiting speeds of 4500/6000 rpm. These entries do not choose a sleeve, a fit or an installation method. ZYS’s TN1 series text names a nylon cage, but the examined material does not identify the supplied resin grade or lubricant/temperature qualification. Keep those details attached to the complete offer as explained in the TN1 construction review.
For the cylindrical installation’s 37/65/1 mm mounting bounds and the separate check of alignment movement and surrounding space, see the 21306 arrangement review. The source’s conflicting axial-load prose also remains unresolved by merely selecting K or CTN1. Provide the actual radial/axial duty for a model-specific assessment.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Calculated from the published values.
Figure
How it is obtained
Result
Radial section height
(D − d) / 2
21 mm
Mean diameter dm
(D + d) / 2
51 mm
Arithmetic on the figures above — not a bearing life calculation for your load case.
ZYS publishes precision bearings, screw-support components and complete spindle units, alongside inspection and analysis services. Decide which product or laboratory deliverable is required, then agree its drawing, duty and acceptance records. Confirm the responsible supply or testing entity and the scope of any claimed standard or laboratory service.
87 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.
Ask the manufacturer for these when you enquire.
Other designations with the same 30x72x19 mm envelope.
Precise row, bore-column headers and series description read live; row screenshot actually viewed. K taper 1:12 is the maker’s series statement; no sleeve designation, drive-up target, mounting torque or offered clearance class published in the examined material.
PDF indices789/790 text read, both pages rendered and actually viewed. General distinction between methods, interference and operating clearance; none of SKF’s numeric drive-up, clearance-reduction or locknut-angle values assigned to ZYS.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies