Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Spherical roller
21308CA
21308CA is a spherical roller designation documented on BearingIndex from 1 manufacturer publication. The published boundary dimensions are 40 × 90 × 23 mm. Every value below comes from that manufacturer’s own published material, with the date it was recorded.
ZYS 21308CA and 21308CC share the listed dimensions and ratings. The quotation still needs to resolve their construction.
The exact adjacent ZYS rows provide no load-rating or speed increase from CA to CC: both list 40/90/23 mm, Cr 88.8 kN, Cor 99 kN and grease/oil speeds of 3600/4500 rpm. Use that equality to question an “upgrade” claim, then obtain the construction information the table does not show.
The actual rows show equal ratings and speeds, with a small mass difference.
ZYS’s 21308CA and 21308CC rows [1] give the following direct comparison. These are this maker’s catalogue entries, not specifications assigned to all bearings carrying those labels.
Published field
21308CA
21308CC
d / D / B
40 / 90 / 23 mm
40 / 90 / 23 mm
Cr / Cor
88.8 / 99 kN
88.8 / 99 kN
Grease / oil limiting speed
3600 / 4500 rpm
3600 / 4500 rpm
da min / Da max / ra max
49 / 81 / 1.5 mm
49 / 81 / 1.5 mm
Reference mass
0.750 kg
0.743 kg
The mass difference is 7 g by subtraction. It does not prove a material change, lower friction, a cooler bearing or a service-life gain. If a quotation promises better performance, request the particular characteristic, the offered construction and supporting assessment or test. These identical rating/speed columns do not demonstrate that promised result.
Equal boundary and mounting dimensions are useful interface screening data. They do not establish identical internal construction, clearance, lubrication features or permissible operating conditions. Review the actual supplied parts rather than accepting “same numbers” as the complete substitution evidence.
The series description does not select the exact construction of an offered 21308CA.
ZYS describes 20000CC as an improved form of its C type. Separately, it describes 20000 CACM with symmetrical rollers, a solid cage, small fixed inner-ring ribs and a movable intermediate retaining ring, and says its main parameters and ratings match CC. The table’s exact label is 21308CA. Have ZYS identify which controlled internal-design description applies to that offer; do not silently expand the designation or import another maker’s CA cage material.
The phrase “improved C type” is not a claim that the CC row has higher ratings than the CA row. The actual 21308CA/CC entries above are equal. Ask the supplier to return a drawing or specification comparison covering the selected cage material and guidance, ring/rib arrangement, complete clearance designation and lubrication features. Specify which of those characteristics your machine requires, then have the maker assess both offers against the same duty.
For a replacement, retain the approved drawing revision and complete original order specification and identify every changed or unresolved item. For a new selection, define the operating and installation requirements first; a generic recommendation to prefer a newer structural form does not establish which offered part meets them. Neither the catalogue nor this page provides a measured CA-to-CC temperature or life comparison.
Keep the bore variants separate: the table lists 21308CAK and 21308CCK as tapered alternatives to the cylindrical entries. Matching the nominal envelope does not approve changing the seat or mounting method.
The adjacent 21308CTN1 row publishes a 45 mm bore, whereas these CA and CC rows publish 40 mm. The page does not explain that discrepancy. Do not normalize the CTN1 row to 40 mm or treat it as the same-bore alternative without a maker-controlled drawing that resolves the actual offered dimension. Its published data remain a source question, not a guessed correction.
A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.
Calculated from the published values.
Figure
How it is obtained
Result
Radial section height
(D − d) / 2
25 mm
Mean diameter dm
(D + d) / 2
65 mm
Arithmetic on the figures above — not a bearing life calculation for your load case.
ZYS publishes precision bearings, screw-support components and complete spindle units, alongside inspection and analysis services. Decide which product or laboratory deliverable is required, then agree its drawing, duty and acceptance records. Confirm the responsible supply or testing entity and the scope of any claimed standard or laboratory service.
87 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08
Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Application · Dynamic load rating · Static load rating · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Limiting speed — grease · Limiting speed — oil · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.
Ask the manufacturer for these when you enquire.
Other designations with the same 40x90x23 mm envelope.
All three precise rows and full units freshly read; centred source screenshot actually viewed. Equal CA/CC rating/speed/mounting fields and different reference masses preserved. CTN1 bore45 versus CA/CC40 remains unresolved, not corrected.
Series text read independently of the model table. CC improvement is relative to C; CACM text says solid cage and matching CC parameters. No maker confirmation equating the exact offered CA construction to the entire CACM description, no cage grade and no comparative test obtained.
Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.
We use cookies and analytics to operate this website and measure visits. Form contents and private workspace pages are excluded from analytics. Privacy & cookies