BearingIndex
THE BEARINGINDEX DIRECTORY

16007 — 35 × 62 × 9 mm

BOUNDARY DIMENSIONSUNIT / mm
B = 9 mmD = 62 mmd = 35 mm
Boundary dimensions · schematic, not a product photograph or manufacturing drawing.
Deep groove ball

16007

16007 is a deep groove ball designation documented on BearingIndex from 2 manufacturer publications. The published boundary dimensions are 35 × 62 × 9 mm. The publishing works are in Zhejiang province, China. Every value below comes from that manufacturer’s own published material, with the date it was recorded.

Bore d
35 mm
Outside D
62 mm
Width B
9 mm

Compare the 2 publications

MODEL-SPECIFIC BUYER GUIDE · SOURCES CHECKED 2026-10-09

Does NBK’s ceramic-ball option make the quoted 16007 an all-ceramic bearing?

No such construction is documented in the examined detail. NBK lists AISI 52100 rings and a choice of steel or Si₃N₄ balls. Select the actual material combination and closure in the quotation; the ceramic-ball option does not replace the published steel-ring specification.

Specify the rings, balls and cage as separate components.

NBK’s actual 16007 detail [1] labels the product SKU NBK-16007 and names ZHY in its brand field. Its component fields say:

ComponentPublished fieldOrder decision
RingsAISI 52100Retain the steel-ring specification unless a different construction is separately documented.
BallsAISI 52100 steel / Si₃N₄ ceramicChoose one actual ball material; the slash is an option, not a delivered-lot identification.
CageSteelInclude this component in the confirmed bill of materials.
ClosureCustomizableName the offered closure and obtain its drawing; customization is not an exact suffix.

If ceramic balls are selected while the published steel rings are retained, the material combination contains both steel and ceramic. Calling the complete bearing “all ceramic” would contradict that bill of materials. If all-ceramic construction is actually required, request a separately defined offer covering the rings and cage as well.

State the reason for requesting ceramic balls: for example, an electrical, corrosion or temperature requirement. The examined page supplies no electrical-insulation test, corrosion rating or model-specific operating comparison between the two ball options. Neither the option name nor the directory’s common 16007 geometry demonstrates those results.

Keep SKU NBK-16007 and the ZHY brand field together when requesting confirmation. They are two identifiers on the same manufacturer page, not evidence of two independent factories or of a second source’s material approval.

The published CAD tab distinguishes closures, and its open-file link currently fails.

The 16007 CAD tab labels a download for the open construction and says CAD files for double rubber seals or double metal shields can be provided on request. The linked open-file route returned a “404 Not Found” page when checked on 9 October 2026. No CAD dimensions were obtained from that route.

Use the manufacturer’s actual product page to request a working controlled drawing for the exact quoted closure. Include the ball material choice in that request. Do not treat the open-download label as a drawing for a sealed or shielded variant.

The detail lists a 35 mm bore with +0/−0.010 mm tolerance, a 62 mm outside diameter with +0/−0.011 mm tolerance, 9 mm outer-ring width and a 0.3 mm fillet-radius entry. The diameter entries translate arithmetically to 34.990–35.000 mm and 61.989–62.000 mm respectively. They are bearing-side published ranges, not a complete shaft/housing fit specification.

For drawing review, have the supplier confirm these ranges and the meaning of the fillet entry for the actual construction, then join them to the machine’s seat and shoulder requirements. The examined page does not supply a width tolerance, a permitted shaft-shoulder radius or the resulting installed clearance.

A customizable option needs data for the configuration actually supplied.

NBK’s series table [2] lists 10,770 N dynamic and 7,880 N static ratings for 16007, with grease/oil speed entries of 10,000/12,000 rpm under non-contact headings. Its detailed product page repeats the numerical ratings and speeds while also offering different balls and customizable closure.

Ask which published values apply to the exact combination in the quotation. The pages do not provide separate steel-ball and ceramic-ball performance tables or demonstrate the listed speeds for every customizable closure.

The ABEC and temperature fields also carry customization wording. Resolve the required precision and temperature duty explicitly and request the applicable specification and lot evidence. An option in the website is not a measurement report for the delivered bearing.

This guide has newly read the NBK detail and series row. The directory’s CZ record remains a separate offer: NBK’s materials, tolerances and customization choices are not assigned to CZ. A comparison between suppliers needs each supplier’s confirmed construction before its operating data can be evaluated.

What each manufacturer published.

ManufacturerDynamic load rating (kN)Static load rating (kN)Limiting speed — grease (rpm)Limiting speed — oil (rpm)Source recorded
CZ
16007
————2026-09-24 source ↗Request
NBK
16007
10.777.8810000120002026-09-24 source ↗Request

A dash means the site’s recorded data does not provide that value; it is not proof that the manufacturer has never published it. Check the reviewed source notes for any newer findings. Dimensions every source agrees on are shown above rather than repeated per row.

Calculated from the published values.

FigureHow it is obtainedResult
Radial section height(D − d) / 213.5 mm
Mean diameter dm(D + d) / 248.5 mm
C / C₀ load ratiodynamic ÷ static load ratingNBK 1.37

Arithmetic on the figures above — not a bearing life calculation for your load case.

The works that publish 16007.

CZ

Ningbo, Zhejiang, China

Miniature motor bearings and inch series

CZ publishes more than a series list: endurance examples, seal/torque comparisons, thermal considerations and Ppk/Cpk targets. Use those details to define the trial for your motor, keeping a 6205ZZ fatigue example separate from the unnamed high-speed endurance test and requesting current part-linked reports and certificate scope.

Published ranges: Metric miniature motor bearings · Inch R-series bearings · Stainless steel bearings · Nonstandard bearing designs

72 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask CZ about 16007

NBK

Ningbo, Zhejiang, China

Deep groove ball bearings and custom variants

NBK’s actual 5200 and Q523 pages separate dimensions, tolerance fields, steel/Si3N4 ball options and grease/oil speeds. Its ceramic route is a steel-ring hybrid proposal, not an all-ceramic corrosion or temperature guarantee. Reconcile actual in-house/outsourced manufacturing with the offered order; ISO9001 and ISO14001 queried valid on2026-10-08, while the displayed IATF image expired in2025 and requires a current record.

Published ranges: Deep groove ball bearings · Customer-specific nonstandard bearings

32 designations documented here · 1 reviewed evidence record · source recorded 2026-10-08

Ask NBK about 16007

Applications the publishing works state.

ApplicationStated by
Brushless motorsCZ
DronesCZ
Garden toolsCZ
Power toolsCZ

Application areas each manufacturer states for its own range. Confirm load, speed, temperature and lubrication for your case.

Fields absent from the recorded dataset.

Precision class · Internal clearance · Sealing · Material · Cage material · Z class · V class · Limiting speed · Lubrication · Operating temperature · Precision standard · Ring material · Rolling element material · Noise / vibration test method · Manufacturer series · Manufacturer suffix · Ball count · Ball diameter · Reference mass.

Ask the manufacturer for these when you enquire.

Neighbouring designations documented here.

DesignationEnvelope d × D × B (mm)Bearing familyWorks
1600112 × 28 × 7Deep groove ball6
1600215 × 32 × 8Deep groove ball6
16002E15 × 32 × 8Deep groove ball1
16002zz15 × 32 × 8Deep groove ball1
1600317 × 35 × 8Deep groove ball6
16003E17 × 35 × 8Deep groove ball1
1600420 × 42 × 8Deep groove ball7
1600525 × 47 × 8Deep groove ball5
1600630 × 55 × 9Deep groove ball5
16006zz30 × 55 × 9Deep groove ball1
1600840 × 68 × 9Deep groove ball3
16008zz40 × 68 × 9Deep groove ball1
1600945 × 75 × 10Deep groove ball2
1601050 × 80 × 10Deep groove ball3
16010ZZ/2RS—Deep groove ball1
1601155 × 90 × 11Deep groove ball2
16011zz55 × 90 × 11Deep groove ball1
1601680 × 125 × 14Deep groove ball1

Each envelope shown is that designation’s own published size.

Request a quote for 16007.

Tick the works you want above, then send one enquiry — each manufacturer answers you separately and cannot see the others.

Open your enquiry How sourcing works here →

Figures on this page are each manufacturer’s own published material, recorded on the dates shown. How we check sources →

PREPARE THE NEXT CONVERSATION

Turn your requirements into an enquiry.

Keep the catalogue reference and your requirements separate. Blank fields remain questions for the manufacturer.

Your entries stay in this page, are not uploaded, and reset on reload. Building or copying this brief does not send an enquiry.

Review your selected products and open the enquiry form →

Open the evidence behind the comparison.

Catalogue figures belong to the stated manufacturer and document. A recording date is not a new inspection, current quotation or confirmed stock.

  1. CZ · 16007 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

  2. NBK · 16007 source ↗

    Directory record dated 2026-09-24. Confirm the current complete designation and controlled drawing with this manufacturer.

Sources used for the individual buyer guide

  1. NBK · actual 16007 detail and CAD tabs ↗

    Fresh specification panel read after it loaded: NBK SKU/ZHY brand, material options, closure, tolerances and duty fields. Description panel contained only its heading. CAD tab read; its /NBK-16007-open/ route actually returned 404 on 2026-10-09. No working CAD or configuration-specific test inspected.

  2. NBK · actual 16007 series-table row ↗

    Fresh 16007 row and mm/N/rpm headings read, including non-contact qualification. No performance improvement, delivered material choice or cross-manufacturer transfer inferred.

Guide checked 2026-10-09. Manufacturer statements, technical background and BearingIndex purchasing suggestions are distinguished in the text. This is not application approval or firsthand product testing.